Product Info

- 28 -

Return

One button return. When the aircraft is flying in the air, operate the one button return button on the remote

control, the screen will prompt “whether to return”, and then click “Yes”, the aircraft will fly to a certain

altitude, then return to the top of the take-off point, and finally land to the ground slowly and stop the propeller.

Manual return. Control the drone above the safe position by the remote control, and slowly pull down the

throttle to the drone landing on the ground, then pull the throttle to the lowest position for 3S to 5S, the aircraft

will automatically enter the lock mode and stop the propeller. As shown below:

The throttle is pulled down slowly to the lowest position when the aircraft lands on the ground

Shut down the drone

1. Shut down the drone

Turn the power switch of the drone landing on the ground and stopping the propeller to the OFF position,

then disconnect the power cord between the host and the battery, push the battery compartment lock button to

remove the battery.

2. Shut down the remote control

Double-click the power button of the remote control, and "Shutdown remote control" and "Restart remote

control" will appear in the display screen of the remote control. Select "Shutdown remote control", and then the

remote control will enter the shutdown state.

AEE Unmanned Aircraft System

Professional Leading