User's Manual


Drone settings
Under the functional parameter options, relevant parameters of the drone, such as: one button
take-off altitude, first-level and second-level low-power alarm values can be set. As shown below:
Remote control settings
Under the functional parameter options, the parameters of the remote control, such as joystick
calibration, joystick sensitivity and viewing the joystick value can be set. As shown below:
Remote control
settings
Map management
Firmware upgrade
Version information
Image transmission
information
Camera parameters
Drone settings
Altitude hold mode
Take-off altitude
First-level alarm
Second-level alarm
First-level alarm action:
Second-level alarm action:
Compass calibration
Only the indicator flashes
Return
Landing
Landing
Return
1. Put the drone horizontally and rotate it.
2. Put the drone vertically and rotate it.
3. Restart the drone and click "Calibration completed" after restarting.
Apply
Map management
Firmware upgrade
Version information
Image transmission
information
Camera parameters
Drone settings
Remote control
settings
Altitude hold mode
Roll
Pitching
Yaw
Throttle
Image transmission
information
Start
calibration
1. Start calibration, please center the joystick
2. Please make the joystick to the maximum value
AEE Unmanned Aircraft System
Professional Leading