ÖKO-LAVAMAT 12700 TURBO ELECTRONIC The environmentally friendly washer-dryer La lavadora-secadora ecológica Instruction booklet Instrucciones para el uso ÖKO_LAVAMAT TURBO F 1200 1000 900 700 400 D 95 C 30 30 40 30 AUS ERFAHRUNG GUT 12700 E 60 50 40 B A 60 50 40 40 40
Dear customer, Contents Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance. This symbol guides you, step by step, in the operation of the appliance.
Contents Preparing the drying cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Garments not suitable for drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Drying symbols on garment labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Duration of the drying cycle . . . . . . . . . . . . . . . . . . . . . . . .
Safety instructions Safety instructions The safety of AEG appliances complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes. General safety • Repairs to the machine must be carried out only by qualified personnel. Repairs carried out by inexperienced persons could cause serious danger. Contact your local AEG Service Force Centre.
Disposal Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. Machine Use authorised disposal sites for your old appliance.
Description of the appliance Description of the appliance Control panel B D Front view F 1200 D 1000 C 900 B 30 400 30 40 30 Control panel A ÖKO_LAVAMAT TURBO F 1200 1000 900 700 400 D 95 C 30 30 40 30 12700 E 60 50 40 B A 60 50 40 40 40 Door A B C D E F G H = = = = = = = = E 60 50 40 A 700 Detergent drawer 95 C E F G 60 50 40 40 40 H Option buttons Spin speed button Display START/PAUSE button Delay start button Drying time button Programme progress display Programme s
Description of the appliance Position at 40°C = Easy to iron. In this position the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Position = cold wash START/PAUSE button Description of the appliance DRYING TIME button If you wish to carry out a timed programme instead of an electronic programme push the button until the drying time you want appears in the display according to the fabrics (cotton or synthetics) you have to dry.
Description of the appliance Description of the appliance PREWASH Display The machine performs a prewash cycle at 30°C max. The prewash cycle ends with a short spin in programmes for Cotton and Synthetics, and with emptying of the water without spinning for Delicates. This option is not available with the wool programme and cannot be used with SOAK and STAINS . For use when washing heavily soiled laundry.
Description of the appliance Cancelling a programme Description of the appliance Detergent dispenser drawer To cancel a programme which is running, turn the programme selector dial to the RESET O position. Warning! After a programme which ends with water in the drum (RINSE HOLD option), turn the selector dial first to O and then to the DRAIN programme “C”. Altering a programme which is running To alter a programme, first set the machine to PAUSE by pressing the START/PAUSE button.
Preparing the wash cycle Preparing the wash cycle Weight of laundry Sort of laundry Sorting out and preparing the laundry • Sort out the laundry according to type of fabrics and care labels (see “Types of fabric and care labels”). • Empty pockets. • Remove any metal parts (safety pins, clips, etc.). • To prevent the laundry from getting damaged and forming bundles, it is advisable to close zips, button up pillowcases and quilt covers and tie up loose straps such as those of aprons.
Preparing the wash cycle Delicates 40 30 Microfibres, synthetics or curtains marked with these symbols require a very gentle treatment. The DELICATES programme is suitable for this type of fabric. 30 40 Woollens and particularly delicate items Fabrics such as wool, wool mix or silk marked with this symbol are particularly sensitive to machine washing. The WOOLLENS programme is suitable for this type of fabric.
Preparing the drying cycle Preparing the drying cycle Drying symbols on garment labels As a dryer, the machine works on the condensation principle. Therefore, the water tap must be open and the drain hose must drain water into a sink or into the drain pipe, even during the drying cycle. Always look at the garment label to check whether garments can be machine dried.
Preparing the drying cycle Additional drying Should the laundry still be too wet at the end of the programme, set another short drying time. Warning! To prevent the formation of creases or shrinking of fabrics, avoid excessive drying. How to dry Drying only Max. load - cottons 2.5 kg - synthetics 2 kg During the drying programme the water tap must be open and the drain hose must be correctly positioned. Turn the programme selector dial to DRYING for cottons or synthetics .
How to wash How to wash Selection of the desired wash programme Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on. The display shows the duration of the programme. EXTRA RINSE F D C B A 95 E 60 50 40 30 30 40 60 50 30 40 40 40 This appliance is designed for saving water.
How to wash How to wash Starting the programme 1. Check that the water tap is open. 2. Press START/PAUSE to start the programme. If the Delay Start option has been selected the programme will start at the end of the countdown. If the door light is red and flashing at the start of the programme it indicates that the door is open. Close the door and press the START/PAUSE button again. If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display.
Programme chart Programme chart Special programmes Wash programmes Wash Temp. programme Fabrics Additional functions Cotton and linen, for example norWhite Cottons 95°-60° mally soiled work garments, sheets, household linen, underwear, towels. STAIN SOAK QUICK PREWASH EXTRA RINSE RINSE HOLD SPIN SPEED Cotton and linen, for example normally to lightly soiled sheets and household linen.
Programme chart Consumption data for drying Drying Degree of drying Type of fabric Max. load Spin speed Drying time mins Cotton and linen (towels, T-shirts, bathrobes) 2.5 kg 1200 75-85 1.5 kg 1200 45-55 2 kg 900 1 kg Store dry (*) Suitable for items to Synthetics and put away without mixed fabrics ironing (jumpers, blouses, underwear, household linen) Iron dry Suitable for ironing Cotton and linen (sheets, tablecloths, shirts, etc.
Cleaning and maintenance Cleaning and maintenance Door seal After each wash Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold. At the end of the wash programme, pull the dispenser drawer out a little to let it dry. Leave the door ajar to allow air to circulate. If the machine is not used for a prolonged period: Close the water tap and unplug the appliance.
Cleaning and maintenance Emergency emptying out If the water is not discharged (pump is blocked, filter or drain pipe are clogged), proceed as follows to empty out the machine: • pull out the plug from the power socket; • close the water tap; • if necessary, wait until the water has cooled; • place a bowl on the floor; • put the drain hose end into the bowl and let the water out.
Something not working? Problem Something not working? Possible cause Solution Problem The water tap is closed (E10). Open the water tap. The water inlet hose is squashed or kinked (E10). The machine does not fill The machine fills then empties immediately Check the whole length of the hose and remove the kink. The small filter of the water Clean the filter. inlet hose is clogged (E10). The door is not properly closed (E40). Close the door. The end of the drain hose is too low.
Something not working? Problem Something not working? Possible cause The unbalance detection device that prevents excessive vibration during spinning has cut in. Spinning starts late or the machine does not spin Solution If the laundry is not evenly distributed inside the drum at the beginning of the spin cycle, the machine detects this and tries to redistribute it more evenly by means of a few drum rotations.
Technical data Height x Width x Depth Depth with door opened Height adjustment Net weight Load (depending on programme) Use Drum speed during washing Drum speed during spinning Water pressure Service 84x60x60 cm 93 cm ± 13 mm approx. 75 kg approx. 5 kg max. domestic max. 55 rpm 1200/1000/900/700/400 rpm 50-800 kPa In the section “Something not working?” some problems that can be solved by yourself are listed. Read this section in the event of problems.
Front view and side view 935 600 606 ÖKO_LAVAMAT TURBO 1200 1000 900 700 400 F D C B A 95 60 50 40 30 30 40 60 50 30 12700 E 40 40 40 835 • This appliance is heavy, care should be taken when moving it. • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer. • All internal packing must be removed before using the appliance.
Installation Installation Unpacking All transit bolts and packing must be removed before using the appliance. Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor. Remove the polystyrene block from the bottom of the 2 machine and 1 release the two plastic bags which are fixed under the filter door.
Installation Water inlet Connect the water inlet hose to a separate tap with a 3/4" thread after havA ing inserted the small filter “A” supplied with the machine. The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks. The inlet hose must not be lengthened.
