User Guide

ManualsBrandsAEG-Electrolux ManualsOther32514DG-W

During Operation

 It is most important that this instruction book should be retained with the appliance for future

reference. Should the appliance be sold or transferred, always ensure that the book is left with

the appliance in order that the new owner can get to know the functions of the appliance and the

relevant warnings.

 This appliance has been designed for non professional purpose in private houses only. It is meant

to cook edible foodstuff only and MUST NOT be used for any other purposes.

 It is dangerous to alter the specification in any way.

 For hygiene and safety reasons, this appliance should be kept clean at all times. A build-up of fats

or other foodstuff could result in a fire.

 Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out

by unexperienced persons may cause injury or serious malfunctioning. Refer to your local

Service Centre. Always insist on genuine spare parts.

 Ensure that all control knobs are in the OFF position when not in use.

 Should you connect any electrical tool to a plug near this cooking appliance, ensure that electric

Important Safety Information

Dear Customer,

These warnings are provided in the interest of safety. You MUST read them carefully before

installing or using the appliance.

ENGLISH

{

The following symbols will be found in the text to guide you throughout the Instructions:

Safety Instructions

Step by step instructions for an operation

Hints and Tips

Environmental information

Guide to Use the instructions

Summary of content (16 pages)

PAGE 1
ENGLISH Dear Customer, These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
PAGE 2
cables are not in contact with it and keep them far enough from the heated parts of this appliance. If the appliance is out of order, disconnect it from the electric supply. Child Safety This appliance has been designed to be operated by adults and children under supervision. Young children MUST NOT be allowed to tamper with the controls or play near or with the oven. Accessible parts of this appliance may become hot when it is in use. Children should be KEPT AWAY until it has cooled.
PAGE 3
Contents For the User Important Safety Information 21 Description of the appliance 24 Instruction for the User 24 Cleaning and Maintenance 26 Something Not Working? 27 Service and original spare parts 35 For the Installer Instruction for the Installer 27 Technical Data 28 Gas connection 29 Adaptation to different types of gas 30 Electrical Connection 31 Building In 32 Possibilities for insertion 33 This appliance complies with the following E.E.C.
PAGE 4
Description of the appliance Pan support Rapid burner Auxiliary burner Control knobs Instruction for the User Hob burners control knobs (Fig. 1) The hob burners control knobs can be turned in three positions. The symbols on the knobs mean that: l there is no gas supply there is maximum gas supply there is minimum gas supply Große Flamme Zündsymbol Kleine Flamme Schalterknebel FO 2205 24 Fig.
PAGE 5
Lighting the burners F For easier lighting, proceed before putting a pan on the pan support. To light a burner, push in the relevant knob and turn it anticlockwise to "maximum position". After lighting the flame, keep the knob pushed down for about 5 seconds. This will allow the "thermocouple" (Fig. 2, lett. D) to be heated and the safety device to be switched off, otherwise the gas supply would be interrupted. Then, check the flame is regular and adjust it as required.
PAGE 6
Cleaning and Maintenance Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. General cleaning Wash the enamelled components with warm soapy water. Never use abrasive cleaners Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food. Regularly wipe over the hob top using a soft cloth weel wrung out in warm water to which a little liquid detergent has been added.
PAGE 7
Something Not Working? F ...The gas ring burns unevenly -Check the main jet is not blocked and the burner crown is clear of food particles. -Check the burner cap and crown have been replaced correctly, e.g. after cleaning. F ...There is no spark when lighting the gas - Check that the unit is plugged in and the electrical supply is switched on - Check the mains fuse has not blown - Check the burner cap and crown have been replaced correctly, e.g. after cleaning.
PAGE 8
Technical Data Dimensions in mm: Overall dimensions H x W x D Cut out dimensions W x D 8 x 290 x 510 270 x 490 Gas Burners Rating in Watt: Front auxiliary burner Back rapid burner 1000 3000 Total burner rating in Watt 4000 Gas connection R 1/2 Setting Natural gas - 20 mbar Adjustments LPG 28-30/37 mbar Category BE - FR IT - ES - PT - GR II2E+3+ II2H3+ Injectors marks Burner Auxiliary Rapid 28 Normal power kW Reduced power kW Nominal power LPG 28-30/37 mbar Natural gas 20 mbar Injectors
PAGE 9
Gas connection Choose fixed connections or use a flexible pipe in stainless steel in compliance with the regulation in force. If using flexible metallic pipes, be careful they do not come in contact with mobile parts or they are not squeezed. Use the same attention when the hob is combinated with an oven. IMPORTANT - To ensure a correct operation, a saving of energy and the long-life of the appliance, the voltage pressure of the appliance must correspond to the recommended values.
PAGE 10
Adaptation to different types of gas Injectors replacement F Remove the pan supports. FO 0392 Remove the burner's caps and crowns. With a socket spanner 7 unscrew and remove the injectors (Fig. 6), and replace them with the ones required for the type of gas in use (see Technical data). Reassemble the parts, following the same procedure backwards. Replace the rating label (placed near the gas supply pipe) with the relevant one for the new type of gas supply. You can find this label in the Fig.
PAGE 11
Electrical Connection The appliance is designed to be connected to 230 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force.
PAGE 12
Building In 29 0 0 51 Fig. 9 These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in the relevant diagram. The edge of the cut out must have a minimum distance from the rear wall of 55 mm. If there are side walls, or sides of the furniture unit near the hob, the cut out edges must have a minimum distance of 100 mm. Hanging forniture units or hoods must be placed at 650 mm. minimum from the hob.
PAGE 13
Fitting the hob to the worktop F To install the hob, proceed as follows: 1) Remove the pan supports, the burners caps and crowns and turn the hob upside down, taking care the ignition candles are not damaged in this operation. 2) Place the sealing gasket (supplied with the hob) Dichtung on the edges of the cut out: place it exactly on the front and rear edge, taking care that the sealings meet without overlapping; 3) Fix the hob with the relevant screws (fig. 11).
PAGE 14
Fig. 12 Fig. 13 20 min 591 a 80 30 490 30 a) Removable panel b) Space possibly useful for connections b 380 140 FO 1017 FO 2166 Fig. 14 Fig. 15 120 cm 2 50 cm 2 180 cm 2 360 cm 2 FO 0939 Fig. 16 FO 0938 Fig. 17 560 min. 650 mm 550 min.
PAGE 15
Service and original spare parts This machine, before leaving the factory, has been tested and studied by many experts and specialists, in order to give you the best results. Any repair work which needs to be carried out should be done with the utmost care and attention. For this reason we reccomend that for any problem you contact the dealer who sold it to you, or our nearest authorized Service Centre, specifying the nature of the problem and the particular model which you own.
PAGE 16
AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg Grafiche MDM - Forlì http://www.aeg.hausgeräte.