User Guide

29
Ramp with
ending nut
Adjustable
connection
Rigid or flexible
gas pipe
Fig. 5
Choose fixed connections or use a flexible pipe in stainless steel in compliance with the regulation in
force.
If using flexible metallic pipes, be careful they do not come in contact with mobile parts or they are not
squeezed. Use the same attention when the hob is combinated with an oven.
IMPORTANT - To ensure a correct operation, a saving of energy and the long-life of the appliance,
the voltage pressure of the appliance must correspond to the recommended values.
The adjustable connection is fixed to the comprehensive ramp by means of a threaded nut GJ 1/2".
Interpose the sealing between the components as shown in fig. 4.
Screw the parts without forcing, adjust the connection in the required direction and tighten everything.
IMPORTANT - When the final connection has been made, it is essential that a thorough leak
test is carried out on the hob and installation. Use some soapy water, never a flame.
Gas connection
A) Ramp with ending
nut
B) Seal
C) Adjustable
connection
Fig. 4
FO 2365