BEDIENUNGSANLEITUNG UND INSTALLATIONSANLEITUNG 353 WK-m 1 BE DE 949600806
AEG beglückwünscht Sie Sehr geehrte Kunden, wir beglückwünschen Sie zum Kauf Ihrer neuen Kochmulde. Es ist wichtig, daß Sie die Funktionen und Finessen der Kochmulde gut kennenlernen. Lesen Sie deshalb diese Gebrauchsanweisung sorgfältig durch, damit Sie so viel Nutzen von Ihrer neuen Kochmulde haben wie möglich. Schenken Sie den mit gekennzeichneten Abschnitten besondere Aufmerksamkeit, dies sind Warnhinweise zur Verhütung von Unfällen. Bewahren Sie die Gebrauchsanweisung auf.
Inhaltsverzeichnis Inhalt Seite An den Anwender AEG beglückwünscht Sie ........................................................................... 2 Sicherheitshinweise ..................................................................................... 4 Beschreibung des Produkts .................................................................. 5 So bedienen Sie ............................................................................................ 6 Brennerabdeckung/ -ring .......................
Sicherheitshinweise Niemals Kunststoff- oder Aluminiumgeschirr für die Gaskochmulde verwenden. Diese Warnhinweise werden im Interesse Ihrer Sicherheit gegeben. Vergewissern Sie sich, daß Sie sie richtig verstanden haben, bevor Sie das Gerät installieren oder benutzen. Ihre Sicherheit steht an erster Stelle. Wenn Ihnen die Bedeutung dieser Warnhinweise unklar ist, wenden Sie sich bitte zwecks Klärung an die Kundendienstabteilung.
Beschreibung des Produkts Brenner Bedienungsschalter 5
So bedienen Sie Brennermarkierung An jedem Schalter gibt es Markierungen, welcher Brenner mit welchem Schalter reguliert wird. Panelmarkierung Jeder Schalter hat einen Skalaring mit Markierungen Abgeschaltete Stellung: Max. Flamme: Min.
Brennerabdeckung/Brennerring Zusammen mit dem Brennerring bildet die Brennerabdeckung den Raum, in dem die endgültige Vermischung von Gas und Luft stattfindet, damit das Gas ordnungsgemäß brennen kann. Brennerring Richtig Bitte beachten: Es ist daher sehr wichtig, daß die Brennerabdeckung und der Brennerring korrekt auf dem Brenner angebracht werden. Der Brennerring ist mit Löchern für die Zündelektrode und für den Thermofühler versehen. Wenn die Brennerabdeckung bzw.
Bitte beachten: Wenn die Kochmulde in eine Arbeitsfläche mit einem darunterliegenden Schrank eingebaut wird, kann die Flamme ausgeblasen werden, wenn die Tür zugeschlagen wird. Die Wok-Einheit ist mit einem speziellen Topfträger ausgestattet, der die Verwendung eines Woks mit rundem Boden ermöglicht. Bei der Verwendung von Kochgeschirr mit flachem Boden darf der Durchmesser dieser Töpfe und Pfannen nicht kleiner sein als 26 cm.
Äußere Brennering Abdeckung inner Brennering Luft Ventil Brenner Körper 9
Zündung Den Drehschalter für den betreffenden Brenner herunterdrücken. Den nach unten gedrückten Drehschalter gleichzeitig nach links in die Stellung “Größte Flamme” drehen, so daß das Gas ausströmt (Zündstellung). Die Zündelektrode erzeugt Funken, und wenn die Gas-Luft-Mischung richtig ist, wird der Brenner entzündet. Wenn es nicht möglich ist, die Einheit an die Stromversorgung anzuschließen, kann ein Streichholz verwendet werden.
Reinigung und Pflege von Aus Hygiene- und Sicherheitsgründen sind die Kochstellen sauber zu halten. Fettflecken und verschüttetes Kochgut qualmen beim Erhitzen und können im schlimmsten Fall ein Feuer verursachen. Ausbau von Paneel Sie können das Paneel ausbauen, damit sich dessen Reinigung einfacher gestaltet.
Flächen aus Edelstahl Für die alltägliche Reinigung benutzen Sie ein gut ausgewrungenes Tuch. Bei hartnäckiger Verschmutzung verwenden Sie ein flüssiges Scheuermittel. Die Reinigung muß immer in der Schleifrichtung des Stahls erfolgen. Um den Glanz des Stahls zu bewahren, empfehlen wir die regelmäßige Anwendung eines Poliermittels für Edelstahl; immer in der Schleifrichtung des Stahls polieren (in Querrichtung). Verwenden Sie nie Putzschwämme, Stahlwolle oder andere kratzende Reinigungsmittel.
Montage Die Kochmulde kann in jeder Arbeitsplatte mit einer Dicke von 28 bis 40 mm montieret werden. Freie Höhe Der Abstand bis zu einem Zwischen/Einlegeboden oder der Obersiete eines Unterschrankes unter der Kochmulde soll mindestens 47 mm betragen. Festspannen Schrauben Sie die Beschläge zum Festspannen so weit heraus, dass die unter die Arbeitsplatte geschraubt werden können. Ziehen Sie die Beschläge mit einem Schraubenzieher fest an die Arbeitsplatte an.
Die äusseren Breitenmaße der Einheiten 145 mm: Dunstabzug 290 mm: 2 Platten Glaskeramikmulde 2 Brenner Gas-mulde Glaskeramikgrill Single-Friteuse Kombigrill Wok 580 mm: 4 Platten Kochmulde 4 platten Glaskeramikmulde 4 Brenner Gas-mulde 725 mm: 4 platten Glaskeramikmulde Montage einer einzelnen Koch-mulde Bei der Montage einer einzelnen Kochmulde (mit 2 oder 4 Platten) in einer Arbeitsplatte, die dicker als 30 mm ist, muß für das Anschlusskabel auf beiden Seiten des Ausschnitts eine Aussparung angebracht we
Montage des Wok-Brenners Es ist sehr wichtig, sowohl der innere als auch der äußere Brennerring ordnungsgemäß einrasten zu lassen. Ansonsten wird der Brenner mit falschem Flammenbild brennen, so dass er kurzfristig ausfällt. Die Ringe sind dann richtig angebracht, wenn es hörbar zum Einrasten kommt. Luftventil Abb. 1 Vorgehensweise wie folgt: 1. Luftventil im Brennerkörper anordnen, siehe Abb. 1. Innerer Brennerring Abb. 2 2. Danach inneren Brennerring anordnen.
Deckel 3. Danach Deckel anbringen. Siehe Abb. 3. Abb. 3 Abb. 4 4. Danach äußeren Brennerring anordnen. Darauf achten, dass der Führungsstift ordnungsgemäß einrastet. Siehe Abb. 4.
Gasinstallation Gemäß den örtlichen Vorschriften für Haushaltgeräte zum Kochen mit Gas. Die Gasinstallation darf nur von hierfür zugelassenen Fachkräften ausgeführt werden. Siehe technische Daten zu Gastypen. Gasanschluss Der Gas-Einlass befindet sich hinten am Gerät unten. Der Einlass weist ein konisches ½-ZollGasgewinde auf (siehe Abb. 1). Falls das Gerät an eine Gasflasche anzuschließen ist, hat die Umrüstung mittels des als Zusatzausrüstung erhältlichen Nachbausatzes zu erfolgen.
Auf der Rückseite des Schrankes muß sich eine Öffnung von mindestens 60 cm² befinden (s. Abb.).
Technische Daten Gastyp Ausgelegt für Erdgas: G20-20 mbar 230 V 1N + PE Schutzklasse und Druck BE: II2E+3e 20/25 - 28/37 mbar N L1 Leitungstyp: 0,75 mm² HO5 VV-F Max. Nennbelastung Q na.Hs: Brenner = 5,0 kW x l Insgesamt = 5,0 kW Die Kochmulde muß über einen externen Schalter mit einem Kontaktabstand von mindestens 3 mm angeschlossen werden (kann auch der Hauptschalter sein). Thermosicherung Die Gashähne sind bei dieser Einheit durch eine Thermosicherung gesichert.
Service Problem Mögliche Ursache Beim Einschalten des Gases wird kein Funke erzeugt Prüfen, ob die 230V-V-anschlußleitung eingesteckt ist. Das Erdschlußrelais hat sich ausgeschaltet. Die Sicherung ist durchgebrannt. Wenn der Drehschalter losgelassen wird, erlischt die Gasflamme wieder. Der Drehschalter wurde nicht lange genug oder nicht weit genug heruntergedrückt. Die Gasflamme brennt sehr unregelmäßig. Prüfen, ob de Abdeckung nach der Reinigung o.ä wieder richtig angebracht wurde.
24 325 88-1652 Rev.