User manual

WHAT TO DO IF…
WARNING!
Refer to "Safety information"
chapter.
Problem Possible cause Remedy
The appliance does not
operate
The fuse in the fuse box is
released
Control the fuse. If the
fuse is released more
than one time, refer to a
qualified electrician.
The appliance does not
operate
You touched 2 or more
sensor fields at the same
time
Only touch one sensor
field
The appliance does not
operate
There is water or fat
stains on the control pan-
el
Clean the control panel
The appliance does not
operate
The child safety device or
key lock or
operates
See the chapter "Operat-
ing the appliance".
The appliance does not
operate
The appliance is not
switched on
Switch on the appliance
The oven does not heat
up
The necessary settings
are not set
Control the settings
The oven lamp does not
operate
The oven lamp is defec-
tive
Replace the oven lamp
Steam and condensation
settle on the food and in
the oven cavity
You left the dish in the
oven for too long
Do not leave the dishes in
the oven for longer than
15-20 minutes after the
cooking process ends
The display shows
“12.00” and "LED"
A power cut Reset the clock
The residual heat indica-
tors does not come on
The cooking zone is not
hot because it operated
only for a short time
If the cooking zone must
be hot, speak to the after
sales service
The cooking zone re-
duces the heat setting to
You covered one or more
sensor fields or there is
water or fat stains on the
control panel.
Uncover the sensor fields.
Clean the control panel
A sound operates when
the appliance is off
You covered one or more
sensor fields
Uncover the sensor fields.
Heat setting alternates The Power management
is active
See the section Power
management
A sound operates and
appliance starts and
stops again. After 5 sec-
onds one more sound
operates
You covered
Uncover the sensor field
ENGLISH 35