User manual

Problem Possible cause Remedy
comes on
The automatic switch-off
operates
Stop the appliance and
start it again
comes on
Overheating protection
for the cooking zone op-
erates
Switch off the cooking
zone. Switch on the cook-
ing zone again
comes on
No cookware on the
cooking zone
Put cookware on the
cooking zone
comes on
Not correct cookware Use the correct cookware
comes on
The diameter of the bot-
tom of the cookware is
too small for the cooking
zone
Move cookware to a
smaller cooking zone
and number come on
There is an error in the
appliance
Disconnect the appliance
from the electrical supply
for some time. Discon-
nect the fuse from the
electrical system of the
house. Connect again. If
comes on again,
speak to the After Sales
Service
come on
There is an error in the
appliance, because a
cookware boils dry or you
use not correct cookware.
Overheating protection
for the cooking zone op-
erates. The automatic
switch-off operates
Switch off the appliance.
Remove the hot cook-
ware. After approximately
30 seconds switch on the
cooking zone again.
should disappear, residu-
al heat indicator can stay.
Cool down the cookware
and check it with the sec-
tion Cookware for the in-
duction cooking zone
36
www.aeg.com