User manual

Problem Possible cause Solution
The oven does not heat
up. The display shows
Demo.
The demo mode is acti-
vated.
1.
Deactivate the appli-
ance.
2.
Press and hold the
button +.
3.
When an acoustic
signal sounds, turn
the knob for the
oven functions to the
first function. Demo
flashes in the dis-
play.
4.
Turn the knob for
the oven functions to
the off position.
5.
Release the button
+.
6.
Turn the knob for
the temperature
clockwise three
times. The acoustic
signal sounds three
times. The demo
mode is deactivated.
The display shows an er-
ror code that is not on
this list.
There is an electronic
fault.
1.
Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse
box and activate it
again.
2.
If the display shows
the error code again,
contact the service
centre.
There is steam and con-
densation on the food
and in the oven.
You left the dish in the
oven for too long.
Do not keep the dishes
in the oven for longer
than 15 - 20 minutes af-
ter the cooking ends.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
38
www.aeg.com