79301 KF-N Ceramic hob Installation and Operating Instructions
Dear Customer, Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appliance. 1 3 2 2 The following symbols are used in the text: Safety instructions Warning! Notes that concern your personal safety. Important! Notes that show how to avoid damage to the appliance.
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions 1 Safety instructions 3 5 Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty. This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Correct use • This appliance should be used only for normal domestic cooking and frying of food.
Safety during use • Remove stickers and film from the glass ceramic. • There is the risk of burns from the appliance if used carelessly. • Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware. • Overheated fat and oil can ignite quickly. When cooking with fat or oil (e.g. frying chips) do not leave the appliance unattended. • Switch the cooking zones off after each use. Safety when cleaning • For cleaning, the appliance must be switched off and cooled down.
Description of the Appliance Cooking surface layout Single cooking zone 1200W Multi-purpose zone 1400/2200W Control panel Control panel Triple ring cooking zone 800/1600/2300W Single cooking zone 1800W Control panel layout Cooking zone indicators Timer function Timer Display Heat setting selection Outside/middle ring On/Off Triple ring pilot light 6 On/Off with power indicator STOP+GO with pilot light Outer ring On/Off Multi-purpose zone pilot light
Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.
Displays Display ¾ u Description Cooking zone is switched off Keep warm setting Keep warm setting/STOP+GO function is set ¿ - Ç Heat settings Heat setting is set 2 - 6 Heating setting plus Intermediate heat setting is set decimal point a Automatic warm up function Automatic warm-up function is activated e Fault Malfunction has occurred h Residual heat Cooking zone is still hot l Child safety device Lock/child safety device is set.
Operating the appliance Switching the appliance on and off Control panel 3 Display Switch on Touch for 2 seconds ¾ / h Switch off Touch for 1 second h / none Pilot light lights up goes out After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off. Selecting the heat setting 3 The keep warm setting u lies between ¾ and ¿. The keep warm setting can be set using or . It is used to keep food warm.
To switch the outside ring on and off 3 By switching the outside rings on or off, the effective heating surface can be matched to the size of the cookware. Before an outside ring can be switched on, the inside ring must be switched on. Triple cooking zone Sensor panel Power indicator To switch on middle ring Touch for 1-2 seconds. One power indicator is lit. To switch on outside ring Touch for 1-2 seconds. Two power indicators are lit. To switch off outside ring Touch for 1-2 seconds.
Using the automatic warm-up function All cooking zones are equpped with an automatic warm up function When setting a heat setting using , when starting from ¾, the cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set.
Using the child safety device The child safety device prevents unintentional use of the appliance. Setting the child safety device Step Control panel Display/Signal 1. Switch on the appliance (Do not set a heat setting) ¾ 2. Touch sounds Acoustic signal 3. Touch until the signal l Appliance switches off. The child safety device is set. Releasing the child safety device Step 1. Control panel Switch on the appliance 2. Touch sounds 3.
Using the timer 3 3 3 Function Pre-requisite Result after time has elapsed Automatic cut-out With heat setting set Acoustic signal 00 flashes Cooking zone switches off Countdown timer Cooking zones are not switched on Acoustic signal 00 flashes While the countdown timer is activated, no cooking zone can be used. The countdown timer basically cannot be used if a cooking zone is switched on. If a cooking zone is switched off, the timer function set is also switched off.
Setting the time Step Control panel 1. Select TIMER cooking Pilot light for the cooking zone sezone lected flashes 2. Touch or Indicator 00 to 99 minutes After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. Switching off the timer function Step Control panel Indicator 1. Select TIMER cooking Pilot light of cooking zone selected zone flashes faster Time remaining is displayed 2. Touch The time remaining counts backwards to 00.
Displaying the time remaining for a cooking zone Step Control panel field Display 1. TIMER Select cooking Pilot light of the cooking zone selectzone ed flashes faster The time remaining is displayed After a few seconds the pilot light flashes more slowly. Switching off the acoustic signal Step Control panel field Acoustic signal 1. Touch TIMER Acoustic signal to acknowledge. Acoustic signal stops.
Safety cut-out Cooking surface • If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. • If one or more sensor fields are covered for longer than approx. 10 seconds, e.g. by a pan placed upon it, a signal sounds and the cooking surface switches off automatically. • If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. 10 seconds.
Tips on cooking and frying 3 Information about acrylamides According to the latest scientific research, intensive browning of food, especially in products containing starch, may present a health risk due to acrylamide. Therefore we recommend cooking at low temperatures and not browning foods too much. Cookware • You can recognise good cookware from the bottoms of the pans. The bottom should be as thick and flat as possible.
Examples of cooking applications The information given in the following table is for guidance only. Heat setting Cooking process Tips/Hints Keeping food warm Keeping cooked foods warm as required Cover Melting Hollandaise sauce, melting butter, chocolate, gelatine 5-25 mins. Stir occasionally Solidifying Fluffy omelettes, baked eggs 10-40 mins. Cook with lid on 1-2 Simmering rice and milkAdd at least twice as based dishes much liquid as rice, stir 25-50 mins.
Cleaning and care 1 1 1 Take care! Risk of burns from residual heat. Important Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. Important Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1. Wipe the appliance with a damp cloth and a little washing up liquid. 2. Rub the appliance dry using a clean cloth. Removing deposits 1.
Metal décor strips 1 Warning! Do not use vinegar, lemon juice or lime slaking agents on the cooking surface's décor strips, otherwise dull spots will result. When cleaning do not introduce flat objects (e.g. knives) under the décor strips, as otherwise these can possibly become detached. 1. Wipe metal décor strips with a damp cloth and a little washing up liquid. 2. Soak dried on spillages with a wet cloth. Afterwards wipe off and rub dry.
What to do if … Problem The cooking zones will not switch on or are not functioning Possible cause Remedy More than 10 seconds have Switch the appliance on passed since the appliance again. was switched on The child safety device is switched on l Deactivate the child safety device (See the section “Child safety device”) Several sensor fields were touched at the same time Only touch one sensor field The sensor fields are partly Remove the cloth or the covered by a damp cloth or liquid.
Problem e and number are displayed 1 3 22 Possible cause Electronics fault Remedy Disconnect the appliance from the electrical supply for a few minutes (Take the fuse out of the house’s wiring system) If after switching on again, e is displayed again, call the customer service department If you are unable to remedy the problem by following the above suggestions, please contact your local Service Force Centre. Warning! Repairs to the appliance are only to be carried out by qualified service engineers.
Disposal 2 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at your local waste disposal facilities. Old appliance W The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Installation Instructions Safety instructions 1 1 24 The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed. A protective floor must be installed under the appliance.
Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors. Electrical Connection Diagram For UK only: 230V...240V~ Sticking on the seal • Clean the worktop in the area of the cut-out section. • Stick the one-sided self-adhesive sealing tape supplied all the way round the lower edge of the cooking surface along the outer edge of the glass ceramic panel. Do not stretch it.
Assembly 26
Rating Plate 79301KF-N 55HDD70AO 949 591 734 230 V 50 Hz 7,5 kW AEG - ELECTROLUX 29
Warranty conditions Great Britain Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity or gas supply stated on the rating plate.
Service and Spare Parts If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning: 0870 5 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www. serviceforce.co.
From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg-electrolux.
