88001K-IN User manual Ceramic glass induction hob
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance. Contents Operating Instructions 2 What to do if ...
Safety information 3 • To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device. General safety • The appliance may only be installed and connected by trained, registered service engineers. • Built-in appliances may only be used after they have built in to suitable built-in units and work surfaces that meet standards.
Description of the appliance Description of the appliance Cooking surface layout 1 2 3 4 5 1 Induction cooking zone 2300 W, with power function 3200 W 2 Induction cooking zone 2300 W, with power function 3200 W 3 Induction cooking zone 2300 W, with power function 3200 W 4 Induction cooking zone 2300 W, with power function 3200 W 5 Control panel The cooking surface is divided into four cooking zones.
Description of the appliance 5 Control panel layout 1 9 1 2 3 4 5 6 7 8 9 2 3 4 8 5 7 6 Lock Power function Heat setting selection Cooking zone indicators. Timer function Timer display Display Timer Stop+Go On/Off with indicator Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Only touch the sensor fields which activate a desired function.
Operating the appliance Sensor field Function Timer Timer selection Lock Locking/unlocking the control panel Power Switch the power function on and off STOP+GO To switch the Keep Warm setting on and off Increase settings To increase heat setting Reduce settings To reduce heat setting Displays Display Description The cooking zone is switched off - Keep Warm settings Keep Warm / STOP+GO function is switched on Heat settings To set heat settings Auto Warm-up The Auto Warm-up function i
Operating the appliance Control panel Display Pilot light Switch on Touch for 2 seconds / lights up Switch off Touch for 1 second / none goes out After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off. Setting the heat setting Control panel Display Increase Touch to Decrease Touch to Switch off Touch The keep warm setting and lies between / at the same time and .
Operating the appliance Heat setting Length of the automatic warm up [min:sec] 2:30 2:50 --- Locking/unlocking the control panel The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth. Control panel Switch on Touch Switch off Touch Display (for 5 seconds) previously set heat setting When you switch the appliance off, the locking function is automatically switched off.
Operating the appliance Step 3. Control panel 9 Display/Signal Switch appliance off. The child safety device is switched off. The child safety device can only be switched on and off if no heat setting is set. Overriding the child safety device The child safety device can be switched off in this way for a single cooking session; it remains activated afterwards. Step 1. 2.
Operating the appliance Power Management The cooking zones of the cooking surface have a maximum power. The maximum power is reached when the heat setting 9 has been set for all cooking zones. Two cooking zones generate a pair (see figure) and therefore, the power management shares the maximum available power between these cooking zones.
Operating the appliance Ste p Control panel 4. Touch once 11 Display Pilot light of the fourth cooking zone flashes The heat setting indicator of the selected cooking zone goes out, as long as the timer time can be set. If the pilot light is flashing more slowly, the heat setting indicator appears again and the heat setting can be re-set or modified.
Operating the appliance Displaying the time remaining for a cooking zone Step 1. Control panel field Select cooking zone Display Pilot light of the cooking zone selected flashes faster The time remaining is displayed After a few seconds the pilot light flashes more slowly. Switching off the acoustic signal Step 1. Control panel field Acoustic signal Acoustic signal to acknowledge. Touch Acoustic signal stops.
Tips on cooking and frying 13 Tips on cooking and frying Information about acrylamides According to the latest scientific research, intensive browning of food, especially in products containing starch, may present a health risk due to acrylamide. Therefore we recommend cooking at low temperatures and not browning foods too much.
Cleaning and care Heat setting Cooking process 0 suitable for Cook time Tips/Hints Off position 1 Keeping food warm Keeping cooked foods warm as required Cover 1-2 Melting Hollandaise sauce, melting butter, chocolate, gelatine 5-25 mins. Stir occasionally 1-2 Solidifying Fluffy omelettes, baked eggs 10-40 mins. Cook with lid on 2-3 Simmering on low heat Simmering rice and milkbased dishes Heating up readycooked meals 25-50 mins.
What to do if ... 15 Scratches or dark stains on the glass ceramic that cannot be removed do not affect the functioning of the appliance. Cleaning the appliance after each use 1. Food containing sugar, plastics, tin foil residues should be removed at once using a scraper. Place a scraper on the glass ceramic surface at an angle and remove residues by sliding the blade over the surface. Wipe the appliance with a damp cloth and a little washing up liquid. Finally, rub the appliance dry using a clean cloth .
What to do if ... Problem Possible cause Remedy Acoustic signal sounds and ap- The On/Off sensor field has Do not place any objects on the pliance switches itself on and been covered up, e.g.
Disposal 17 • Cracking noise 1 when using cookware made of different materials (Sandwich construction) • Whistling 1 2 when using an individual cooking zone or sev1 eral cooking zones with high powers when the 3 cookware is made of different materials (Sandwich construction) • Humming 2 can occur at high power levels • Clicking 2 during electric switching processes • Hissing, buzzing 3 The device is fitted with a fan for cooling the electrics.
Safety information Installation Instructions Safety information WARNING! This must be read! The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed.
Safety information 19 • Stick the sealing tape flush into the corner of the rabbet, so that no silicon compound can get under the glass ceramic when grouting. • Don’t stretch the tapes when sticking them on. Assembly min. 500 min. 50 min. 5 R10 R5 7 min. 25 min. 5 12 min. 20 min. 600 490 750 514 +1 774 +1 min. 38 min.
Service Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.
892930100-B-122008 www.electrolux.
