88031KF-N User manual Ceramic glass induction hob
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance. Contents Operating Instructions 2 What to do if ...
Safety information 3 • To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device. General safety • The appliance may only be installed and connected by trained, registered service engineers. • Built-in appliances may only be used after they have built in to suitable built-in units and work surfaces that meet standards.
Description of the appliance Description of the appliance Cooking surface layout 1 2 m 0m 18 145 180 m m 210 4 1 2 3 4 5 mm mm 3 5 Induction cooking zone 1850 W, with power function 2500 W Induction cooking zone 1400 W, with power function 1800 W Induction cooking zone 1850 W, with power function 2500 W Induction cooking zone 2300 W, with power function 3700 W Control Panel Control panel layout 1 2 9 8 1 2 3 4 5 6 7 8 9 Child lock with display Cooking zone indicators - Timer functio
Description of the appliance 5 Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Only touch the sensor fields which activate a desired function. Do not cover other sensor fields. If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance switches itself off.
Operating the appliance Operating the appliance Use the induction cooking zones with suitable cookware. Switching the appliance on and off Control panel Display Pilot light Switch on Touch for 1 second / lights up. Switch off Touch for 1 second / none goes out. After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
Operating the appliance 7 Using the automatic warm-up function All cooking zones are equipped with an automatic warm-up function. When setting a heat setting using the automatic warm-up function, the cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set. Control Panel Display 1. Step Touch 2. Move your finger down from to select the desired heat setting between and / after 5 seconds .
Operating the appliance Switching off the child safety device Step Control panel 1. Display/Signal Switch on appliance. Do not set a heat setting. 2. Touch 3. for 4 seconds lights up Switch appliance off. The child safety device is switched off. The child safety device can only be switched on and off if no heat setting is set. Overriding the child safety device The child safety device can be switched off in this way for a single cooking session; it remains activated afterwards.
Operating the appliance 9 Power Management The cooking zones of the cooking surface have a maximum power. The maximum power is reached when the heat setting 14 has been set for all cooking zones. Two cooking zones generate a pair (see figure) and therefore, the power management shares the maximum available power between these cooking zones.
Operating the appliance Step Control panel Display 2. Touch once Pilot light of the second cooking zone flashes 3. Touch once Pilot light of the third cooking zone flashes 4. Touch once Pilot light of the fourth cooking zone flashes If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes. Setting the time Step 1. 2.
Tips on cooking and frying 11 Switching off the acoustic signal Step 1. Control panel field Acoustic signal Acoustic signal to acknowledge. Touch Acoustic signal stops. Automatic switch off Cooking surface • If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. • If one or more sensor fields are covered by objects (a pan, etc.) for longer than approx.
Tips on cooking and frying Cookware for induction cooking zones Cookware material Suitable Steel, enamelled steel + Cast iron + Stainless steel +* Cookware bottom of multilayer +* Aluminium, copper, brass - Glass, ceramic, porcelain - * Cookware for induction cooking zones is labelled as suitable by the manufacturer. Suitability test Cookware is suitable for induction cooking, if … • ...
Cleaning and care Heat setting Cooking process suitable for Cook time 10-40 mins. 13 Tips/Hints 1-3 Solidifying Fluffy omelettes, baked eggs Cook with lid on 3-5 Simmering Simmering rice and 25-50 mins. milkbased dishes Heating up readycooked meals Add at least twice as much liquid as rice, stir milk dishes part way through cooking 5-7 Steaming Braising Steaming vegetables, fish Braising meat 20-45 mins.
What to do if ... Cleaning the appliance after each use 1. Food containing sugar, plastics, tin foil residues should be removed at once using a scraper. Place a scraper on the glass ceramic surface at an angle and remove residues by sliding the blade over the surface. Wipe the appliance with a damp cloth and a little washing up liquid. Finally, rub the appliance dry using a clean cloth. 2.
What to do if ... Problem/Display Possible Cause 15 Remedy lights up Automatic switch-off has been Switch appliance off.
Disposal • Hissing, buzzing 3 The device is fitted with a fan for cooling the electrics. A whiring noise can be heard when operating the fan which may deviate depending on the performance and may continue for a while after the appliance is switched off. The noises described are normal and do not refer to any defects. Disposal The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Safety information 17 WARNING! Risk of injury from electrical current. • The electrical mains terminal is live. • Make electrical mains terminal free of voltage. • Follow connection schematic. • Observe electrical safety rules. • Ensure anti-shock protection by installing correctly. • The appliance must be connected to the electrical supply by a qualified electrician. • Loose and inappropriate plug and socket connections can make the terminal overheat.
Safety information 600 min. 55 750+1 490+1 min. 55 min. 5 R5 min. 20 min. 5 min. 25 min. 5 min. 38 min. 5 min.
Service 19 Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.
www.electrolux.com 892930035-A-062008 www.aeg-electrolux.co.
