User Guide

Operating the appliance
Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
Control panel Display Pilot light
Switch on
Touch for 1 second /
lights up.
Switch off
Touch for 1 second / none
goes out.
After switching on, within approx. 10 seconds a heat setting or a function must be set,
otherwise the appliance automatically switches itself off.
Setting the heat setting
Control Panel Display
To set the heat setting Touch the desired heat setting,
if necessary, correct to the left
or to the right
to /
Switch off Touch 0
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can be locked at any time
in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
Control panel Display
To switch on
Touch (for 4 seconds)
To switch off
Touch
previously set heat setting
When you switch the appliance off, the locking function is automatically switched off.
Turning the STOP+GO function on and off
The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode
then back to the heat setting they were at before
Control panel Display
To switch on
Touch
To switch off
Touch
Previous heat setting (not automatic warm-up or power
function)
STOP+GO does not stop timer functions.
STOP+GO controls the entire control panel apart from the sensor field .
6
Operating the appliance