User Guide

Switching off the child safety device
Step Control panel Display/Signal
1.
Switch on appliance. Do not set a heat setting.
2.
Touch for 4 seconds lights up
3.
Switch appliance off.
The child safety device is switched off.
The child safety device can only be switched on and off if no heat setting is set.
Overriding the child safety device
The child safety device can be switched off in this way for a single cooking session; it remains
activated afterwards.
Step Control panel Display/Signal
1.
Switch appliance on
2.
Touch for 4 seconds lights up
Until the appliance is next switched off, it can used as normal. After switching off the appliance,
the child safety device is active again.
After overriding the child safety device, a heat setting or a function must be set within
approx. 10 seconds, otherwise the appliance automatically switches itself off.
Switching the power function on and off
The power function makes more power available to the induction cooking zones, e.g. to
bring a large quantity of water to the boil quickly. The power function is activated for 8
minutes at most. After that the induction cooking zone automatically switches back to heat
setting
.
Control panel Display
To switch on
Touch
To switch off Touch a heat setting
/
8
Operating the appliance