98131K-IN Benutzerinformation InduktionsGlaskeramik-Kochfeld
Inhalt Danke, dass Sie sich für eines unserer hochqualitativen Produkte entschieden haben. Lesen Sie für eine optimale und gleichmäßige Leistung Ihres Gerätes diese Benutzerinformation bitte sorgfältig durch. Sie wird Ihnen helfen, alle Vorgänge perfekt und äußerst effizient zu steuern. Damit Sie diese Benutzerinformation bei Bedarf stets zur Hand haben, empfehlen wir Ihnen, sie an einem sicheren Ort aufzubewahren.
Sicherheitshinweise 3 Sicherheit für Kinder • Halten Sie Kleinkinder grundsätzlich fern. • Größere Kinder nur unter Anleitung und Aufsicht am Gerät arbeiten lassen. • Um ein unbeabsichtigtes Einschalten durch Kleinkinder und Haustiere zu verhindern, empfehlen wir, die Kindersicherung zu aktivieren. Allgemeine Sicherheit • Montage und Anschluss des Gerätes dürfen nur durch ausgebildete und autorisierte Fachkräfte vorgenommen werden.
Gerätebeschreibung Gerätebeschreibung Ausstattung Kochfeld 1 2 3 6 5 4 1 Induktions-Kochzone 2300W mit Power-Funktion 3200W 2 Induktions-Kochzone 2400W mit Power-Funktion 3700W 3 Induktions-Kochzone 2300W mit Power-Funktion 3200W 4 Induktions-Kochzone 2300W mit Power-Funktion 3200W 5 Bedienfeld 6 Induktions-Kochzone 2300W mit Power-Funktion 3200W Das Kochfeld ist in fünf Kochzonen gegliedert In jeder Kochzone befindet sich unter der Glaskeramik ein Induktions-Heizelement, dessen Mitte jeweils mit
Gerätebeschreibung 5 Ausstattung Bedienfeld 1 2 9 3 8 1 2 3 4 5 6 7 8 9 4 7 6 5 Kindersicherung mit Anzeige Kochzonen-Anzeigen/Kurzzeitmesser-Funktion Timer-Anzeige Power-Funktion Kochstufenanzeige Kochstufenauswahl Timer STOP+GO mit Anzeige Ein/Aus mit Kontrolllampe Touch Control-Sensorfelder Das Gerät wird mit Touch Control-Sensorfeldern bedient. Die Funktionen werden durch Berühren der Sensorfelder gesteuert und durch Anzeigen und akustische Signale bestätigt.
Bedienung des Geräts Sensorfeld Funktion STOP+GO Warmhaltestufe ein-/ausschalten Power Power-Funktion ein-/ausschalten Timer Timer Auswahl Einstellungen erhöhen Timer-Zeit erhöhen Einstellungen verringern Timer-Zeit reduzieren Anzeigen Anzeige Beschreibung Kochzone ist ausgeschaltet + Zahl Warmhaltestufe Die Warmhaltefunktion STOP+GO ist eingeschaltet Kochstufen Kochstufe einstellen Ankoch-Automatik Ankoch-Automatik ist aktiv Fehler Fehlfunktion ist aufgetreten Topferkennung Kochg
Bedienung des Geräts 7 Gerät ein- und ausschalten Bedienfeld Anzeige Kontrolllampe Einschalten 1 Sekunde berühren / leuchtet. Ausschalten 1 Sekunde berühren / keine erlischt. Nach dem Einschalten muss innerhalb von ca. 10 Sekunden eine Funktion eingestellt werden, sonst schaltet sich das Gerät automatisch aus.
Bedienung des Geräts Benutzung der Ankoch-Automatik Alle Kochzonen sind mit einer Ankoch-Automatik ausgestattet. Beim Einstellen einer Kochstufe mit der Ankoch-Automatik schaltet die Kochzone für eine bestimmte Zeit auf die volle Leistung und schaltet dann automatisch auf die eingestellte Kochstufe zurück. Schri tt Bedienfeld 1. berühren 2. Fahren Sie mit Ihrem Finger nach unten von , um die gewünschte Kochstufe zu wählen zwischen und Anzeige / nach 5 Sekunden .
Bedienung des Geräts 9 Kindersicherung ausschalten Schritt Bedienfeld 1. Gerät einschalten. (keine Kochstufe einstellen). 2. 4 Sekunden berühren 3. Gerät ausschalten. Anzeige/Signal leuchtet Die Kindersicherung ist ausgeschaltet. Die Kindersicherung kann nur ein- oder ausgeschaltet werden, wenn keine Kochstufe gewählt ist. Kindersicherung überwinden Die Kindersicherung kann auf diese Weise für einen einzelnen Kochvorgang ausgeschaltet werden; sie bleibt danach aktiviert. Schritt Bedienfeld 1.
Bedienung des Geräts Power-Management Die Kochzonen des Kochfeldes verfügen über eine maximale Leistung. Die maximale Leistung ist erreicht, wenn für alle Kochzonen Kochstufe 14 eingestellt ist. Zwei Kochzonen bilden ein Paar, (siehe Abbildung), d.h. zwischen diesen Kochzonen teilt das Power-Management die maximal verfügbare Leistung auf.
Bedienung des Geräts Schritt Bedienfeld 11 Anzeige 3. 1x berühren Kontrolllampe der dritten Kochzone blinkt 4. 1x berühren Kontrolllampe der vierten Kochzone blinkt 5. 1x berühren Kontrolllampe der fünften Kochzone blinkt Sind weitere Timer-Funktionen eingestellt, wird nach einigen Sekunden die kürzeste verbleibende Zeit der Timer-Funktionen angezeigt und die entsprechende Kontrolllampe blinkt. Zeit einstellen Schritt 1. 2.
Bedienung des Geräts Zeigt die Restzeit für eine Kochzone an Schritt 1. Bedienfeld Anzeige Kochzone auswählen Kontrolllampe der ausgewählten Kochzone blinkt schneller Die Restzeit wird eingeblendet Nach einigen Sekunden blinkt die Kontrolllampe langsamer. Akustisches Signal ausschalten Schritt 1. Bedienfeld Akustisches Signal Akustische Quittierung. berühren Das akustische Signal hört auf. Automatische Abschaltung Kochfeld • Wird nach dem Einschalten des Kochfelds nicht innerhalb von ca.
Tipps zum Kochen und Braten 13 Tipps zum Kochen und Braten Acrylamidehinweis Nach neuesten wissenschaftlichen Erkenntnissen kann eine intensive Bräunung der Lebensmittel, speziell bei stärkehaltigen Produkten, eine gesundheitliche Gefährdung durch Acrylamid verursachen. Daher empfehlen wir, möglichst bei niedrigen Temperaturen zu garen und die Speisen nicht zu stark zu bräunen.
Tipps zum Kochen und Braten Anwendungsbeispiele zum Kochen Die Angaben in der nachfolgenden Tabelle sind Richtwerte. Kochstufe Garvorgang 0 geeignet für Zeit Hinweise/Tipps Position Aus Warmhalten Warmhalten von gegarten Speisen 1-3 Schmelzen Sauce Hollandaise, 5-25 Min. Schmelzen von Butter, Schokolade, Gelatine Zwischendurch umrühren 1-3 Stocken Schaumomelett, Eierstich 10-40 Min. Abdecken 3-5 Quellen Quellen von Reis und Milchgerichten Erhitzen von Fertiggerichten 25-50 Min.
Wartung und Reinigung 15 Die Power-Funktion ist für das Erhitzen großer Flüssigkeitsmengen geeignet. Wartung und Reinigung WARNUNG! Scharfe und scheuernde Reinigungsmittel beschädigen das Gerät. Gerät reinigen und die Rückstände mit Wasser und Spülmittel nach jeder Benutzung des Geräts entfernen. Auch alle Spülmittelreste entfernen! Kratzer oder dunkle Flecken in der Glaskeramik lassen sich nicht mehr entfernen, beeinträchtigen jedoch die Funktion des Geräts nicht. Gerät nach jedem Gebrauch reinigen 1.
Was tun, wenn... Störung/Anzeige Mögliche Ursache Abhilfe Display schaltet ständig zwischen zwei Kochstufen um Das Power-Management redu- Siehe hierzu den Abschnitt ziert automatisch die Leistung "Power-Funktion ein-/ausdieser Kochzone schalten" Die Restwärme-Anzeige zeigt nichts an Die Kochzone ist nur kurz in Betrieb gewesen und daher noch nicht heiß Sollte die Kochzone eigentlich heiß sein, rufen Sie bitte den lokalen Kundendienst.
Entsorgung 17 • Prasseln 1 bei Verwendung von Kochgeschirr aus verschiedenem Materialien (Sandwichkonstruktion) 2 • Pfeifen 1 1 beim Betrieb einer einzelnen Kochzone oder 3 mehrerer Kochzonen mit hohen Leistungen, wenn Kochgeschirr aus verschiedenen Materialien (Sandwich-Bauweise) verwendet wird • Brummen 2 kann bei hohen Leistungsstufen auftreten • Klicken 2 bei elektrischen Schaltvorgängen • Rauschen, Surren 3 Das Gerät ist mit einem Ventilator zur Kühlung der Elektronik ausgestattet.
Sicherheitshinweise Montageanweisung Sicherheitshinweise Sicherheitsanweisung WARNUNG! Unbedingt lesen! Die im Einsatzland geltenden Gesetze, Verordnungen, Richtlinien und Normen sind einzuhalten (Sicherheitsbestimmungen, sach- und ordnungsgemäßes Recycling etc.) Die Montage darf nur von einer Fachkraft ausgeführt werden. Die Mindestabstände zu anderen Geräten sind einzuhalten.
Sicherheitshinweise 19 Hausanschluss Dieses Gerät muss an 230V und 3 Phasen angeschlossen werden. 400V 3N black L1 green-yellow PE 1 2 brown blue 4 3 grey L2 N 230V~ 230V~ L3 Dichtung einkleben • Die Arbeitsplatte im Ausschnittbereich reinigen. • Das mitgelieferte, einseitig selbstklebende Dichtungsband umlaufend auf der Unterseite des Kochfeldes entlang des äußeren Randes der Glaskeramikscheibe aufkleben. Dabei nicht dehnen. Die Schnittstelle soll in der Mitte einer Seite liegen.
Kundendienst min. 25 min. 5 min. 20 min. 38 min. 5 Typenschild Modell 98131K-IN Typ 55 GAD E6 AG Prod. Nr. – 949 593 074 220V-240V, 50Hz Induction 11,1kW 11,1kW AEG-ELECTROLUX Kundendienst Bei technischen Störungen prüfen Sie bitte zunächst, ob Sie mit Hilfe der Gebrauchsanweisung (Kapitel "Was tun, wenn...") das Problem selbst beheben können. Wenn Sie das Problem nicht beheben konnten, wenden Sie sich bitte an den Kundendienst oder einen unserer Service-Partner.
– Dreistellige Kombination für Glaskeramik – Modellbezeichnung – Produktnummer (PNC) – Seriennummer (Nummern - siehe Typschild) – Art der Störung – eventuelle Fehlermeldungen, die angezeigt werden vom Gerät
www.electrolux.com 892930158-A-102008 Benötigen Sie Zubehör, Verbrauchsmaterial und Ersatzteile? Dann besuchen Sie bitte unseren Onlineshop unter: www.aeg-electrolux.