Manualshelf

User manual

ManualsBrandsAeg-Electrolux ManualsDomestic AppliancesA75320GA
11121314151617181920
Description of the appliance
818 36 13-01/0 125
Temperature display
The temperature display shows several types of
information.
• In normal operation the current freezer compartment temperature is
displayed (ACTUAL temperature).
• During temperature adjustment, a blinking display of the
temperature selected at the moment occurs (DESIRED temperature).
• In the TURBO/FROSTMATIC function of the cooling mode "IC" for
intensive cooling appears in the display .
The current freezer temperature appears in the display while TURBO/
FROSTMATIC is functioning during freezing mode. If one of the tem-
perature setting buttons is pressed, “SF” (Super Frost) will appear in
the display for 5 seconds. The display will then revert to showing the
current freezer temperature.
• In the event that frozen food has been partially or totally defrosted,
perhaps as the result of a lengthy power failure, if the ALARM OFF
button is activated the temperature display will show the warmest
temperature the frozen food has reached on restoration of the power
supply.
• If there is a fault in the appliance a square or a letter will appear in
the temperature display.
TURBO/FROSTMATIC-button
The TURBO/FROSTMATIC function in the freezing mode
provides for quick freezing of fresh food products, and at
the same time protects previously stored goods against
undesired warming in the freezer compartment.
In the cooling mode the TURBO/FROSTMATIC function is suitable for
fast cooling larger quantities of foodstuff, e.g. drinks or salads during a
party. Thereby a DESIRED temperature of +2 °C is automatically preset.
0 1. The TURBO/FROSTMATIC function is switched on by pressing the
TURBO/FROSTMATIC button. The yellow light illuminates.
The display shows „SF“ in the freezing mode. After 5 seconds the display
changes to show the actual temperature again.
In the cooling mode the display shows „IC“.
The compressor runs continuously.
2. The TURBO/FROSTMATIC function can be ended manually at any time
by pressing the TURBO/FROSTMATIC button again. The yellow light goes
out.