A81000TNX0 EN FREEZER USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 7 9 9 9 10 12 14 14 18 Safety information Control panel First use Daily use Helpful Hints and Tips Care and cleaning What to do if… Technical data Installation Environmental concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
Safety information 5 • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel to avoid hazard. • • • • 1. Power cord must not be lengthened. 2. Make sure that the power plug is not squashed or damaged by the back of the appliance.
Safety information Care and cleaning • Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket. • Do not clean the appliance with metal objects. • Do not use sharp objects to remove frost from the appliance. Use a plastic scraper. • Never use a hair drier or other heating appliances to speed up defrosting. Excessive heat may damage the plastic interior, and humidity could enter the electric system making it live.
Control panel CONTROL PANEL 1 1 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 9 Green ON/OFF Indicator Light ON/OFF Button Temperature Regulator Button (for higher temperatures) Display (shows the set temperature) Temperature Regulator Button (for lower temperatures) Red ALARM Indicator Light ALARM STOP Button Yellow SUPER function Indicator Light SUPER Button Switching on • • • • • Allow the appliance to stand for 4 hrs after installation. Insert the plug into the wall socket.
Control panel Temperature regulation The set temperature of the freezer may be adjusted by pressing the Temperature Regulator Buttons. Set default temperature -18 °C, it is optimal for food storage. The Display shows the set temperature. The set temperature will be reached within 24 hours. Fluctuations of some degrees around set temperature are normal and does not mean any fault in the appliance. After a power failure the set temperature remains stored.
First use 9 FIRST USE Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brandnew product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish. DAILY USE Freezing fresh food The freezer compartments (indicated with graphics) are suitable for freezing fresh food and storing frozen and deep-frozen food for a long time.
Care and cleaning Hints for freezing To help you make the most of the freezing process, here are some important hints: • the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating plate; • the freezing process takes 24 hours.
Care and cleaning 11 Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odour. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush or a vacuum cleaner. This operation will improve the performance of the appliance and save electricity consumption.
What to do if… WHAT TO DO IF… WARNING! Before troubleshooting, disconnect the mains plug from the mains socket. Only a qualified electrician or competent person must do the troubleshooting that is not in this manual. There are some sounds during normal use (compressor, refrigerant circulation). The appliance operates discontinuously, so the stopping of compressor does not mean being no current. That is why you must not touch the electrical parts of the appliance before breaking the circuit.
What to do if… Problem Possible cause 13 Solution Large quantities of food to be frozen were put in at the same time Insert smaller quantities of food to be frozen at any one time. Food placed in the appliance was too warm Allow food to cool to room temperature before storing.
Technical data TECHNICAL DATA Dimension Height 850 mm Width 595 mm Depth 635 mm Rising Time 13 h Voltage 230-240 V Frequency 50 Hz The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label. INSTALLATION WARNING! Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance.
Installation 15 Location 15mm 15mm 100mm The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet.To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, however, the appliance should not be positioned below overhanging wall units.
Installation 6. Unscrew the top door hinge pin of the appliance then screw it back on the other side. 7. Fit the appliance door on the upper door hinge pin. 8. Remove the lower hinge. Put over the pin in the direction of the arrow. 9. Unscrew and install the screw on the opposite side. 10. Install the lower hinge on the opposite side leaving the position of the door unchanged. 11. Screw in the one screw in the place set free on the other side as well as the adjustable feet (2 pieces). 12.
Installation 1 5 17 2 3 4 The wires in the mains lead are coloured in accordance with the following code: 1 Green and Yellow: Earth 3 Brown: Live 5 Blue: Neutral As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the earth symbol or coloured green and yellow. 2.
Environmental concerns ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
www.aeg-electrolux.
