ATK1371 EN REFRIGERATOR IT FRIGORIFERO USER MANUAL ISTRUZIONI PER L’USO 2 20
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 6 7 7 9 10 12 14 14 19 Safety information Operation First use Daily use Helpful hints and tips Care and cleaning What to do if… Technical data Installation Environmental concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
Safety information 5 • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel. • • • • 1. Power cord must not be lengthened. 2. Make sure that the power plug is not squashed or damaged by the back of the appliance.
Operation • Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean the drain. If the drain is blocked, water will collect in the bottom of the appliance. Installation For electrical connection carefully follow the instructions given in specific paragraphs. • Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing.
First use 7 Temperature regulation The temperature is automatically regulated. To operate the appliance, proceed as follows: • turn the Temperature regulator toward lower settings to obtain the minimum coldness. • turn the Temperature regulator toward higher settings to obtain the maximum coldness. A medium setting is generally the most suitable.
Daily use In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer than the value shown in the technical characteristics chart under "rising time", the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooling). Thawing Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compartment or at room temperature, depending on the time available for this operation.
Helpful hints and tips 9 HELPFUL HINTS AND TIPS Normal Operating Sounds • You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped through the coils or tubing. This is correct. • When the compressor is on, the refrigerant is being pumped around and you will hear a whirring sound and a pulsating noise from the compressor. This is correct. • The thermic dilatation might cause a sudden cracking noise. It is natural, not dangerous physical phenomenon. This is correct.
Care and cleaning • only freeze top quality, fresh and thoroughly cleaned, foodstuffs; • prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required; • wrap up the food in aluminium foil or polythene and make sure that the packages are airtight; • do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter; • lean foods store better and longer than fa
Care and cleaning 11 Take care of not to damage the cooling system. Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little washing-up liquid added. After cleaning, reconnect the equipment to the mains supply.
What to do if… Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. A temperature rise of the frozen food packs, during defrosting, may shorten their safe storage life. Periods of non-operation When the appliance is not in use for long periods, take the following precautions: 1. disconnect the appliance from electricity supply 2.
What to do if… Problem Possible cause 13 Solution The door has been opened too frequently. Do not keep the door open longer than necessary. The product temperature is too high. Let the product temperature decrease to room temperature before storage. The room temperature is too high. Decrease the room temperature. Water flows on the rear plate of the refrigerator. During the automatic defrosting process, frost defrosts on the rear plate. This is correct. Water flows into the refrigerator.
Technical data 3. Remove the lamp cover (refer to the illustration). 4. Replace the used lamp with a new lamp of the same power and specifically designed for household appliances. (the maximum power is shown on the lamp cover). 5. Install the lamp cover. 6. Tighten the screw to the lamp cover. 7. Connect the mains plug to the mains socket. 8. Open the door. Make sure that the lamp comes on. Closing the door 1. Clean the door gaskets. 2. If necessary, adjust the door. Refer to "Installation". 3.
Installation Climate class 15 Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Levelling When placing the appliance ensure that it stands level. This can be achieved by two adjustable feet at the bottom in front (2). If necessary adjust the feet by removing the spacer (1). 1 2 Location 15mm 15mm 100mm The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.
Installation Installing under a continuous worktop A 2 m 200 c 105 570 550 3 93-10 820 min If your refrigerator is installed under a continuous worktop, an air outlet opening of at least 200cm2 and a ventilation grille matching the worktop design should be installed at the rear of the worktop. The cut surfaces of the worktop should be varnished to avoid swelling due to penetration of moisture.
Installation 17 Door reversibility To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations. To change the opening direction of the door, do these steps: 1. Remove the plug from the power socket. 2. Tilt back the appliance carefully so that the compressor cannot touch the floor. 3. Unscrew both adjustable feet. 4. Unscrew the screws of the door bottom hinge. 5.
Installation 12. Remove and install the handle5) on the opposite side. 13. Reposition, level the appliance, wait for at least four hours and then connect it to the power socket. Do a final check to make sure that: • All screws are tightened. • The door opens and closes correctly. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket.
Environmental concerns 19 The plug socket necessary for connection of your appliance to the electricity supply should be positioned so that it is possible to pull out the appliance plug. If your appliance is installed under a continuous worktop, the plug socket should be provided as shown. Electrical connection Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply. The appliance must be earthed.
PER RISULTATI PERFETTI Grazie per aver scelto di acquistare questo prodotto AEG. Lo abbiamo creato per fornirvi prestazioni impeccabili per molti anni, grazie a tecnologie innovative che vi semplificheranno la vita - funzioni che non troverete sui normali elettrodomestici. Vi invitiamo di dedicare qualche minuto alla lettura per sapere come trarre il massimo dal vostro elettrodomestico.
Indice 21 INDICE 22 25 25 25 27 29 31 33 33 38 Informazioni per la sicurezza Uso dell'apparecchio Primo utilizzo Utilizzo quotidiano Consigli e suggerimenti utili Pulizia e cura Cosa fare se… Dati tecnici Installazione Considerazioni ambientali In questo manuale sono riportati i seguenti simboli: Informazioni importanti relative alla prevenzione dei rischi per la salute personale e dei danni alle apparecchiature.
Informazioni per la sicurezza INFORMAZIONI PER LA SICUREZZA Per garantire un impiego corretto e sicuro dell'apparecchio, prima dell'installazione e del primo utilizzo leggere con attenzione il libretto istruzioni, inclusi i suggerimenti e le avvertenze. Per evitare errori e incidenti, è importante garantire che tutte le persone che utilizzano l'apparecchio ne conoscano il funzionamento e le caratteristiche di sicurezza.
Informazioni per la sicurezza 23 – Evitare fiamme libere e scintille – Aerare bene il locale in cui si trova l'apparecchiatura • È pericoloso cambiare le specifiche o modificare il prodotto in qualunque modo. Un danneggiamento del cavo potrebbe provocare cortocircuiti, incendi e/o scosse elettriche. AVVERTENZA Tutti i componenti elettrici (cavo di alimentazione, spina, compressore) devono essere sostituiti da un tecnico certificato o da personale d'assistenza qualificato. • • • • 1.
Informazioni per la sicurezza Pulizia e cura • Prima della manutenzione, spegnere l'apparecchio e staccare la spina dalla presa. • Non pulire l'apparecchio con oggetti metallici. • Non usare oggetti appuntiti per rimuovere la brina dall'apparecchio. Usare un raschietto di plastica. • Esaminare regolarmente il foro di scarico dell'acqua di sbrinamento nel frigorifero. Se necessario, pulirlo. Se il foro è otturato, l'acqua si raccoglie sul fondo dell'apparecchio.
Uso dell'apparecchio 25 USO DELL'APPARECCHIO Accensione Inserire la spina nella presa. Ruotare il termostato in senso orario fino a una regolazione media. Spegnimento Per spegnere l'apparecchio, ruotare il termostato in posizione "O". Regolazione della temperatura La temperatura è regolata automaticamente. Per utilizzare l'apparecchio, procedere come segue: • ruotare il termostato verso una regolazione bassa per un raffreddamento minimo.
Utilizzo quotidiano Per congelare cibi freschi non è necessario cambiare la regolazione media. Tuttavia, per un'operazione di congelamento più rapida, ruotare il termostato verso una regolazione più alta per ottenere il massimo raffreddamento. In questa condizione la temperatura del vano frigorifero può scendere sotto 0°C. In questo caso riportare il termostato verso una regolazione più calda.
Consigli e suggerimenti utili 27 Posizionamento dei ripiani della porta Per facilitare l'introduzione di alimenti di diverse dimensioni, i ripiani della porta possono essere posizionati ad altezze differenti. Per regolare l'altezza dei ripiani, procedere come segue: tirare delicatamente il ripiano nella direzione indicata dalle frecce fino a sganciarlo, quindi riposizionarlo dove necessario.
Consigli e suggerimenti utili • coprire o avvolgere il cibo, in particolare se emana un odore forte • posizionare il cibo in modo che l'aria possa circolare liberamente attorno ad esso Consigli per la refrigerazione Consigli utili: Carne (tutti i tipi): avvolgerla in sacchetti di politene e collocarla sul ripiano di vetro sopra il cassetto delle verdure. Per motivi di sicurezza, conservarla in queste condizioni solo per uno o due giorni al massimo. Cibi cucinati, piatti freddi ecc..
Pulizia e cura 29 • Una volta scongelato, il cibo si deteriora rapidamente e non può essere ricongelato. • Non superare il periodo di conservazione indicato dal produttore. PULIZIA E CURA ATTENZIONE Staccare la spina dell'apparecchio prima di eseguire lavori di manutenzione. Questo apparecchio contiene idrocarburi nell'unità di raffreddamento; la manutenzione e la ricarica devono pertanto essere effettuate esclusivamente da tecnici autorizzati.
Pulizia e cura È importante pulire periodicamente il foro di scarico dell'acqua di sbrinamento, situato al centro del canale sulla parete posteriore, per evitare che l'acqua fuoriesca sugli alimenti. Usare l'apposito utensile già inserito nel foro di scarico. Sbrinamento del congelatore Una certa quantità di brina si formerà sempre sui ripiani del congelatore e attorno allo scomparto superiore. Sbrinare il congelatore quando lo strato di brina raggiunge uno spessore di ca. 3-5 mm.
Cosa fare se… 31 3. Sbrinare e pulire l'apparecchiatura e tutti gli accessori 4. Lasciare le porte aperte per evitare la formazione di odori sgradevoli. Se l'apparecchiatura rimane accesa, farla controllare periodicamente per evitare che gli alimenti si deteriorino in caso di interruzione della corrente elettrica. COSA FARE SE… AVVERTENZA Prima della ricerca guasti, estrarre la spina dalla presa.
Cosa fare se… Problema Possibile causa Soluzione Scorre acqua sul pannello posteriore del frigorifero. Durante lo sbrinamento automatico, la brina che si forma sul pannello posteriore si scioglie. Non si tratta di un'anomalia. Scorre acqua all'interno del frigorifero. Lo scarico dell'acqua è ostruito. Pulire lo scarico dell'acqua. Gli alimenti impediscono all'ac- Evitare di disporre gli alimenti diqua di scorrere nell'apposito col- rettamente contro la parete polettore. steriore.
Dati tecnici 33 3. Rimuovere il coprilampada (vedere la figura). 4. Sostituire la lampada usata con una nuova con la stessa potenza e studiata in modo specifico per gli elettrodomestici. (la potenza massima consentita è indicata sul coprilampada). 5. Installare il coprilampada. 6. Serrare la vite del coprilampada. 7. Inserire la spina nella presa. 8. Aprire la porta. Controllare che la lampadina si accenda. Chiusura della porta 1. Pulire le guarnizioni della porta. 2. Se necessario, regolare la porta.
Installazione Classe climatica Temperatura ambiente SN da +10°C a 32°C N da +16°C a 32°C ST da +16°C a 38°C T da +16°C a 43°C Livellamento L'apparecchiatura deve trovarsi perfettamente in piano. Per correggere gli eventuali dislivelli è possibile regolare in altezza i due piedini anteriori (2). Se necessario, regolare i piedini rimuovendo il distanziatore (1).
Installazione 35 Installazione sotto un piano di lavoro continuo 2 m 200 c 3 93-10 A 105 570 550 820 min Se il frigorifero viene installato sotto un piano di lavoro continuo, è necessario lasciare un'apertura per la circolazione dell'aria di almeno 200 cm2 e, sulla parte posteriore del piano di lavoro, occorre installare una griglia di ventilazione, abbinata allo stile del medesimo.
Installazione rondella idonea (non fornita, di plastica o legno). Questo accorgimento impedirà alla cerniera di piegarsi, compromettendo eventualmente in futuro il funzionamento della porta. Reversibilità della porta Per eseguire le seguenti operazioni, si raccomanda di farsi aiutare da un'altra persona che tenga ben ferme le porte dell'apparecchiatura. Per modificare la direzione di apertura della porta, procedere come segue: 1. Estrarre la spina dalla presa. 2.
Installazione 37 12. Rimuovere e installare la maniglia10) sul lato opposto. 13. Riposizionare l'apparecchio, metterlo in piano, attendere almeno quattro ore e collegarlo alla rete di alimentazione. Effettuare un controllo finale per verificare che: • Tutte le viti siano serrate. • La porta si apra e si chiuda correttamente. Se la temperatura ambiente è bassa (ad esempio in inverno), è possibile che la guarnizione non aderisca perfettamente. In tal caso, attendere che aderisca naturalmente.
Considerazioni ambientali La posizione della presa a muro, necessaria per collegare l'apparecchiatura alla rete di alimentazione, deve essere tale da permettere di sfilare la spina di alimentazione dell'apparecchiatura. Se l'apparecchiatura è installata sotto un piano di lavoro continuo, la posizione della presa dovrebbe essere quella indicata di seguito.
www.aeg-electrolux.