User manual
If Duration no longer flashes, push the Selection button again and then set length for
the pyrolytic procedure.
You can also change switch off time for pyrolytic cleaning using the clock function End
(within 2 minutes of the pyrolytic cleaning starts).
4. Pyrolytic cleaning starts.
During pyrolytic cleaning the light does not operate.
When the oven reaches pre-set temperature, the door locks.
The bars of the heat indicator come up, until the door unlocks again.
Shelf Support Rails
Removing the shelf support rails
1. Pull the front of the shelf support rail
away from the side wall.
2. Pull the rear shelf support rail away from
the side wall and remove it.
Installing the shelf support rails
Install the shelf support rails in opposite sequence.
Important! The rounded ends of the shelf support rails must point to the front!
Oven lamp
WARNING!
There is a danger of electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch off the circuit breaker.
Put a cloth on the bottom of the oven for protection of the oven light and glass cover.
2
1
Care and cleaning
23