B9831-5 Notice d’utilisation Four électrique encastrable
Sommaire Nous vous remercions d’avoir choisi l’un de nos produits de qualité. Afin de garantir une performance optimale et constante de votre appareil, veuillez lire attentivement cette notice d'utilisation. Il vous permettra d’utiliser correctement et efficacement toutes les fonctions de l’appareil. Nous vous recommandons de conserver cette notice à proximité pour une utilisation rapide et optimale.
Notice d'utilisation 3 Notice d'utilisation 1 Avertissements importants Sécurité de l’installation électrique • Le branchement de l’appareil est du ressort exclusif d’un technicien qualifié. • En cas de dysfonctionnements ou de dommages sur l’appareil : retirez les fusibles ou mettez l’appareil hors tension • Les réparations de l’appareil sont du ressort d'un service après vente. Les réparations inadéquates peuvent occasionner de graves dangers.
Avertissements importants Pour éviter d’endommager l’appareil • Ne recouvrez pas la sole du four avec du papier d’aluminium et ne posez pas de plaque à pâtisserie ou de marmite, etc. sur la sole du four au risque d’endommager l’émail du four sous l’effet de l’accumulation de la chaleur. • Les jus de fruits qui s’égouttent des plaques à pâtisserie laissent des taches qui sont ensuite indélébiles. Pour faire cuire des gâteaux très juteux, utilisez une plaque à fond creux.
Description de l'appareil Description de l'appareil Vue d'ensemble Affichage et touches du four Poignée de la porte Porte en verre 5
Description de l'appareil Les commandes électroniques du four Affichage Barre des symboles Barre de menu Ligne de texte ___________________ MULTI NIVEAUX 150ûc 12.05 Affichage du niveau de préchauffage du four Température 00.06 Niveaux de gradin Heure du jour Température au cœur de la viande Fonctions de durée Durée de fonctionnement Barre de menu Une barre clignotante situé sur la barre de menu indique la position dans laquelle vous vous trouvez.
Description de l'appareil 7 Touches wm¸¹º»¼-+ Touche w m Fonction Sélectionner des fonctions du four. Défilement vers le bas et vers le haut dans le menu. ¸ Ouvrir le menu des options. Fermer le menu des options (en pressant longuement sur une touche). ¹ Confirmer, passage au sous-menu. º Mettre l’appareil en fonctionnement / à l’arrêt. » Activer ou désactiver PRECHAUFFAGE RAPIDE ¼ Sélection entre les fonctions du four, les fonctions de l’heure et SONDE A VIANDE.
Description de l'appareil Equipement du four Voûte et élément chauffant du gril Eclairage du four Niveaux de gradin Prise pour la sonde à viande Filtre à graisse Eclairage du four Élément chauffant arrière Ventilateur Sole Gradin fil, amovible Face interne de la porte La numérotation des gradins du four est représentée sur la face interne de la porte du four.
Description de l'appareil Accessoires du four Grille Elle permet de poser des plats (rôtis, gratins), les moules à pâtisserie, etc. Plateau multi-usages Pour gâteau, biscuits, pizza Rôtissoire À utiliser pour rôtir des aliments ou pour recueillir les graisses. Sonde à viande Pour déterminer avec précision l'état de cuisson de pièces de viande.
Avant la première utilisation Avant la première utilisation Sélectionner la langue 1. Lorsque l’appareil est branché, le message SPRACHE EINSTELLEN - LANGUAGE MENU s’affiche. 2. A l’aide des touches de direction ou , sélectionner la langue souhaitée. SPRACHE EINSTELLEN ý ý ý 888ûcþ ýþ ýþ ý ý ý þüþ1ü2.0ü0 ý ý ý ý ý 88.8ú8 wm¸¹º»¼-+ FRANCAIS ý ý ý 888ûcþ ýþ ýþ ý ý ý þüþ1ü2.0ü0 ý ý ý ý ý 88.8ú8 wPmP¸¹º»¼-+ 3. Confirmer votre sélection à l’aide de la touche OK .
Avant la première utilisation 11 Régler l’heure du jour 3 L’heure doit être réglée uniquement si l’appareil n’a pas été sous tension pendant un laps de temps prolongé. 1. HEURE DU JOUR s’allume. L’affichage de l’heure indique 12.00. 2. Réglez l’heure courante à l’aide de la touche ou . ý ý ý 888ûcþ HEURE DU JOUR ýþ ýþ ý ý þüþ1ü2.2ü5 ý ý ý ý ýò 88.8ú8 wm¸¹º»¼-P+P 3. Confirmez le réglage à l’aide de la touche SÉLECTION. L’appareil est maintenant prêt à l'utilisation.
Commande du four Commande du four Vue d’ensemble des commandes Menu Menu Fonctions four Menu Options MULTI NIVEAUX RECETTES AUTO SOLE PULSEE RECETTES PERSO BASSE T° 120° CUISSON TRADITION TURBO GRIL ¸ OPTIONS w m ¹ MAXI GRIL GRIL w MAINTIEN AU CHAUD m FILTRE ANTI ODEUR HEAT + HOLD DECONGELATION ALLONGER TEMPS CHALEUR DE SOLE PRECHAUFF RAPIDE VOLAILLE CHALEUR RESIDUELLE ROTI DE PORC REGLAGE DU SON ROTI DE BOEUF SELECTION LANGUE ROTI DE VEAU REGLAGE USINE w m GIBIER 3 A chaqu
Commande du four Exemple de sélection d’une fonction du four 1. Mettre l’appareil sous tension à l’aide de la touche MARCHE/ARRÊT . ý ý ý –—FONCTIONS FOUR 280ûcþ ýþ ýþ ý ý þüþ1ü2.2ü5 ý ý ý ý ý ý 88.8ú9 wm¸¹ºP»¼-+ 2. Sélectionner la fonction du four à l’aide des touches de direction ou . Une proposition de température s’affiche sur l’indicateur de température. Le four commence à chauffer. 3. La touche ou permet d’augmenter ou de diminuer la température.
Commande du four Utilisation des fonctions four Les fonctions du four suivantes sont à votre disposition: Fonction du four Utilisation MULTI NIVEAUX Pour cuire sur trois niveaux à la fois. Diminuez la température du four de 20 à 40 °C par rapport à la température Voûte/sole. SOLE PULSEE Pour cuire sur un gradin des mets nécessitant un brunissage intensif et un fond croustillant Réglez une température du four de 20 à 40° inférieure à celles de la voûte et de la sole.
Commande du four Programme viande avec utilisation de la sonde à viande BOEUF Degré de cuisson Précision BOEUF SAIGNANT BOEUF A POINT - BOEUF BIEN CUIT BOEUF SCA BOEUF SCA SAIGNANT BOEUF SCA A POINT Rosbif à la scandinave (peu bruni) BOEUF SC BIEN CUIT PORC - - VEAU - - GIGOT D’AGNEAU - - GIBIER - - VOLAILLE - - Utilisations, tableaux, conseils et recettes La brochure ci-jointe contient des conseils pratiques relatifs aux différentes fonctions du four, aux programmes et aux recet
Commande du four Désactiver la fonction four Appuyez sur les touches de direction ou jusqu’à ce que FONCTIONS FOUR s’affiche à nouveau. –—FONCTIONS FOUR ý ý ý 280ûcþ ýþ ýþ ý ý þüþ1ü2.2ü5 ý ý ý ý ý ý 88.8ú9 wPmP¸¹º»¼-+ Mettre l’appareil hors tension Mettez l’appareil hors tension à l’aide de la touche MARCHE/ARRÊT . ý ý ý 280ûcþ ýþ ýþ ý ý þüþ1ü2.2ü5 ý ý ý ý ý ý 88.
Commande du four Indicateur de chaleur résiduelle Une fois le four mis à l’arrêt la chaleur résiduelle reste affichée. ý ý ý ýþ ýþ ý ý 160ûcþÝÞßÜþ1ü3.2ü5 ý ý 17 ý ý ý ý 88.8ú9 wm¸¹º»¼-+ Affichage de la température au degré près Appuyer sut les touches et en même temps. La température réelle dans le four s’affiche. CUISSON TRADITION ý ý ý 295ûcþ ýþ ýþ ý ý þüþ1ü3.2ü5 ý ý ý ý ý ý 00.
Commande du four Installation de la grille : Placez la grille de manière à ce que les deux tiges de guidage soient orientées vers le bas. Placez la grille entre les rails du gradin que vous avez sélectionné. 3 Grâce au cadre de la grille qui augmente lors du fonctionnement, la vaisselle ne risque pas de glisser. Insérez la grille et la rôtissoire Placez la grille sur la rôtissoire. Faites glisser la rôtissoire entre les rails du gradin que vous avez sélectionné.
Commande du four 19 Sonde à viande 3 Lorsque la sonde à viande est installée, le menu FONCTIONS FOUR propose une gamme de fonctions du four correspondantes ainsi que des programmes additionnels. 1 Avertissement: Utiliser exclusivement la sonde à viande fournie avec l’appareil ! Pour la remplacer, utiliser exclusivement une pièce de rechange d’origine ! Installer la sonde à viande 1. A l’aide de la touche MARCHE/ARRÊT , mettre l’appareil sous tension. 2.
Commande du four La température à cœur actuelle s'affiche à présent. 3 3 Si FONCTIONS FOUR devait déjà être affiché dans la ligne de texte avant que la température à coeur soit réglée, appuyer sur la touche SÉLECTION , jusqu’à ce que le symbole clignote et que le réglage soit effectué. –—FONCTIONS FOUR ý ý ý 888ûcþ ýþ ë ý ý þüþ8ü3ü0û8 ý ý ý ý ý ý 88.8ú8 wm¸¹º»¼-+ La température à cœur est indiquée à partir de 30°C. 3. Régler la fonction du four ou la température du four.
Commande du four 21 Programmes automatiques Outre les fonctions du four qui permettent de régler individuellement la cuisson et le rôtissage, vous pouvez utiliser également les divers programmes automatiques : 1. Programme viande avec indication du poids (menu FONCTIONS FOUR) 2. Programme viande avec sonde à viande (menu FONCTIONS FOUR) 3.
Commande du four Programmes viande avec sonde à viande 3 Lorsque la sonde à viande est branchée, le menu FONCTIONS FOUR propose des programmes viande supplémentaires pour la sonde à viande. Ce programme permet de régler de manière optimale la cuisson de chaque type de viande. 1 Avertissement: Utiliser exclusivement la sonde à viande fournie avec l’appareil ! Pour la remplacer, utiliser exclusivement une pièce de rechange d’origine ! 1.
Commande du four Options RECETTES AUTO Aperçu général ¸ RECETTES AUTO ¹ PATISSERIES CAKE AU CITRON CAKE SUEDOIS GATEAU MARBRE w GATEAU AU FROMAGE CAKE AUX FRUITS m TRESSE SABLEE TRESSE BRIOCHEE PAIN BLANC RETOUR RECETTES DIVERSES PIZZA ¹ GRATIN DAUPHINOIS TARTE A L’OIGNON w QUICHE LORRAINE LASAGNE m CANNELLONI POELEE D’ESCALOPES FILETS DE POISSON RETOUR SPECIALES GATEAU EN POUDRE ¹ w PIZZA SURGELEE DESSECHAGE m STERILISATION RETOUR RETOUR ¹ ¹ w m ¹ ¹ ¹ 23
Commande du four PATISSERIES et RECETTES DIVERSES 3 Pour utiliser cette fonction, se reporter aux recettes indiquées dans le chapitre intitulé « Applications, tableaux et conseils ». Cette fonction permet de choisir le réglage optimal pour chaque recette. Sélectionner une recette 1. La touche OPTION permet de passer au menu options. _____ RECETTES AUTO ý ý ý 280ûcþ ýþ ýþ ý ý ý þüþ1ü2.2ü8 ý ý ý ý ý 01.5ü5 wm¸P¹º»¼-+ 2. La touche OK permet de passer au menu RECETTES AUTO.
Commande du four 6. Un signal sonore indique la fin de la cuisson. – « 00:00 » et le symbole clignotent. – Le chauffage du four se désactive automatiquement. 7. Appuyer sur une touche quelconque pour désactiver le signal. _______ TARTE A L’OIGNON ý ý ý 280ûcþ ýþ ýþ ý ý þüþ1ü3.1ü5 ý ÒÓ í ý ý ý 00.0ü0 wm¸¹º»¼-+ Différer le départ Il est possible de différer le programme et de le lancer automatiquement ultérieurement (voir les fonctions de l’horloge FIN ).
Commande du four La catégorie SPECIALES comporte les options de menu suivantes : GATEAU EN POUDRE Cuisson de gâteaux prêts et de mélanges. PIZZA SURGELEE Cuisson de plats préparés congelés tels que les pizzas, les lasagnes, les gratins et les pommes de terre. DESSECHAGE Séchage de fruits, d’herbes et de champignons. STERILISATION Conserves de fruits et de légumes. Pour toute information complémentaire relative à cette fonction, se reporter au chapitre « Applications, tableaux et conseils ».
Commande du four 6. Avec la touche de déplacement ou sélectionner les lettres souhaitées dans l’ordre alphabétique. __ RECETTE N° 1 ý ý ý 280ûcþ ýþ ýþ ý ý þüþ1ü2.2ü8 ý ý ý ý ý ý 88.8ú9 wPmP¸¹º»¼-+ 7. Avec la touche ou déplacer le champs d'écriture vers la droite ou vers la gauche. La lettre suivante clignote et peut être modifiée ou vous pouvez écrire le nom de votre “recette personnelle”. 3 3 TARTE MAISON _ ý ý ý 280ûcþ ýþ ýþ ý ý þüþ1ü2.2ü8 ý 88.
Commande du four OPTIONS 3 Indépendamment de l’utilisation respective du four, il vous est possible de modifier divers réglages de base. Ils restent réglés ainsi tant que vous ne les modifiez pas. FILTRE ANTI ODEUR – FILTRE A. ODEUR ON Le filtre anti-odeurs est activé lorsqu’un processus de cuisson ou de rôtissage est démarré. – FILTRE A.ODEUR OFF Le filtre anti-odeurs ne s’allume que pour l’autonettoyage (après 100 heures environ).
Commande du four 29 Adaptation des OPTIONS La touche OPTION permet d’ouvrir le menu options. Les touches de direction ou permettent de choisir l’option de menu OPTIONS . La touche OK permet de passer au menu OPTIONS . Les touches de direction ou permettent d’aller au réglage que vous souhaitez adapter. 5. Appuyer sur la touche OK : La valeur actuellement sélectionnée s’affiche. 6. Les touches de direction ou permettent de sélectionner la valeur souhaitée. 7. Appuyer sur la touche OK .
Commande du four ALLONGER TEMPS Permet de prolonger la dernière fonction de cuisson après écoulement de la durée programmée. Condition : • Toutes les fonctions de cuisson avec DUREE ou. • Aucune fonction du four avec SONDE A VIANDE. La ALLONGER TEMPS est activée ou désactivée dans le menu OPTIONS . 1. 2. 3. 4. 5. 3 Activer la fonction ALLONGER TEMPS La fonction de cuisson est terminée. Un signal sonore retentit et un message apparaît.
Commande du four 3 31 Il est également possible d’activer la fonction PRECHAUFFAGE RAPIDE avec les fonctions du four MULTI NIVEAUX, SOLE PULSEE, CUISSON TRADITION et TURBO GRIL. Fonctions de l'horloge MINUTERIE Pour régler le minuteur. Un signal sonore retentit lorsque la durée sélectionnée est écoulée. Cette fonction est sans effet sur le fonctionnement du four. DUREE Pour régler la durée de cuisson. FIN Pour régler I´heure de fin de cuisson. HEURE DU JOUR Pour régler, modifier ou consulter l'heure.
Commande du four MINUTERIE 1. Appuyer sur la touche SÉLECTION jusqu’à ce que MINUTERIE et le symbole s’affiche. __ ý ý ý 888ûcþ ýþ ýþ ý MINUTERIE ý þüþ1ü4.3ü5 ý ý ý ý ñ ý 00.0ü0 wm¸¹º»¼P-+ 2. A l’aide de la touche ou. , sélectionner la durée souhaitée sur le minuteur (max. 99 minutes). __ ý ý ý 888ûcþ ýþ ýþ ý MINUTERIE ý þüþ1ü4.3ü5 ý ý ý ý ñ ý 03.5ü0 wm¸¹º»¼-P+P Au bout d’env. 5 secondes, l’indicateur affiche le temps résiduel. FONCTIONS FOUR ainsi que le symbole s’affichent.
Commande du four DUREE 1. Sélectionner une fonction du four et une température. 2. Appuyer sur la touche SÉLECTION jusqu’à ce que DUREE et le symbole s’affichent. ý ý ý 200ûcþ 33 ___ ýþ ýþ ý DUREE ý ý þüþ1ü4.3ü5 ý í ý ý ý 00.0ü0 wm¸¹º»¼P-+ 3. A l’aide de la touche ou , sélectionner la durée de cuisson souhaitée. ___ ý ý ý 200ûcþ ýþ ýþ ý ý þüþ1ü4.3ü5 ý DUREE ý í ý ý ý 00.3ü0 wm¸¹º»¼-P+P Au bout d’env. 5 secondes, le temps de cuisson restant s’affiche. Le symbole s’allume.
Commande du four FIN 1. Sélectionner une fonction du four et une température. 2. Appuyer sur la touche SÉLECTION jusqu’à ce que FIN et le symbole s’affichent. ý ý ý 200ûcþ ___ ýþ ýþ ý ý þüþ1ü4.3ü5 ý ý FIN ýî ý ý 14.3ü5 wm¸¹º»¼P-+ 3. A l’aide de la touche ou , sélectionner l’heure de désactivation souhaitée. ___ ý ý ý 200ûcþ ýþ ýþ ý ý þüþ1ü4.3ü5 ý ý FIN ýî ý ý 15.2ü5 wm¸¹º»¼-P+P Au bout d’env. 5 secondes, l’heure de la désactivation s’affiche. Le symbole s’allume.
Commande du four Utilisation conjointe des fonctions DUREE 3 et FIN Il est possible d’utiliser conjointement les fonctions DUREE et FIN doit s’allumer et s’éteindre automatiquement à une heure différée. 1. Sélectionner une fonction du four et une température. 2. A l’aide de la fonction du four DUREE , sélectionner la durée de cuisson de la préparation, par ex. : 1 heure. ý ý ý 200ûcþ ýþ ýþ ý lorsque le four ___ DUREE ý þüþ1ü2.0ü5 ý ý í ý ý ý 01.0ü0 wm¸¹º»¼-+ 3.
Commande du four Modifier HEURE DU JOUR 3 L’heure ne peut être réglée que si la sécurité enfants est désactivée, si aucune fonction d’horloge, telle que DUREE ou FIN , ni aucune fonction du four n’est activée. 1. Allumer l’appareil à l’aide de la touche MARCHE/ARRÊT 2. Appuyer sur la touche SÉLECTION jusqu’à ce que HEURE DU JOUR et le symbole s’affichent. ý ý ý 888ûcþ HEURE DU JOUR ýþ ýþ ý ý þüþ1ü2.2ü5 ý ý ý ý ýò 88.8ú8 wm¸¹º»¼P-+ 3.
Commande du four 2. Appuyer simultanément sur les touches SÉLECTION et , jusqu’à ce que SECURITE ENFANT s’éteigne. La SECURITE ENFANT est maintenant désactivée et le four est de nouveau en état de marche normal. BLOCAGE TOUCHES Cette fonction permet d’éviter une manipulation erronée des fonctions du four sélectionnées. Activer BLOCAGE TOUCHES 1. Le cas échéant, mettre l’appareil sous tension à l’aide de la touche MARCHE/ARRÊT 2. Sélectionner une fonction du four. 3.
Nettoyage et entretien Nettoyage et entretien 1 Avertissement : Pour le nettoyage, l’appareil doit être arrêté et refroidit. Avertissement : Pour des raisons de sécurité, ne pas nettoyer l’appareil avec un nettoyeur à jets de vapeur ou à haute pression. Attention : Ne pas utiliser de poudre à récurer, d’outil de nettoyage coupant ou de tampon à récurer.
Nettoyage et entretien 39 Gradins fils Pour nettoyer les parois latérales, les gradins fils sont amovibles du côté gauche et du côté droit du four.
Nettoyage et entretien Eclairage du four 1 Avertissement : Risque d'électrocution ! Avant de remplacer la lampe du four : – Mettez le four hors service ! – Enlevez les fusibles ou débranchez les disjoncteurs de l’armoire à fusibles. 3 Placez un torchon sur la sole du four afin de protéger la lampe du four et le verre de protection. Remplacer la lampe du four / nettoyer le verre de protection 1. Enlever le verre de protection en le dévissant vers la gauche et nettoyez-le. 2.
Nettoyage et entretien 41 Voûte du four Pour le nettoyage de la voûte du four, l'élément chauffant de la voûte peut être rabattu. Rabattre l'élément chauffant 1 1 Avertissement: Ne rabattez l'élément chauffant que lorsque le four est hors service et qu'il n'y a plus de danger de brûlure! 1. Enlevez le gradin fil latéral. 2. Saisissez l'élément chauffant à l'avant et tirezle vers l'avant au-dessus de l'estampage à la paroi intérieure du four. 3. L'élément chauffant se rabat vers le bas.
Nettoyage et entretien Porte du four Afin de faciliter le nettoyage, il est possible de démonter la portedu four. Décrochage de la porte du four 1. Ouvrez complètement la porte du four. 2. Relevez complètement le levier de serrage (A) situé sur les deux charnières de la porte. 3. Saisissez la porte à deux mains sur les côtés et fermez-la jusqu’à atteindre la première position d’accrochage (env. 45°). 4.
Nettoyage et entretien 43 Accrochage de la porte du four 1. Saisissez chaque côté de la porte du four, côté poignée vers soi et en bas, et maintenez-la dans un angle d’env. 45°. Introduisez simultanémentles charnières situées dans la partie inférieure de la porte dans les deux charnières présentes dans le bas du four. Baissez la porte vers le bas, jusqu’au point de résistance. 2. Ouvrez complètement la porte du four. 3.
Nettoyage et entretien Démontage des vitres de la porte 1. Ouvrez complètement la porte du four. 2. Relevez complètement le levier de serrage (A) situé sur les deux charnières de la porte. 3. Saisissez la porte à deux mains sur les côtés et fermez-la jusqu’à atteindre la première position d’accrochage (env. 45°). 4.
Nettoyage et entretien Montage des vitres de la porte 1. Insérez les vitres de la porte l’une après l’autre, en procédant en oblique par le haut, dans le profil de la porte situé au niveau de l'arête inférieure de la porte, puis abaissezles. 3 Insérez d’abord les deux plus petites vitres, et la plus grande en dernier lieu. 2. Saisissez le support de la porte (B) sur les côtés, appliquez-le dans sa position d'origine sur le bord intérieur de la porte et fixez-le sur l'arête supérieure de la porte.
Nettoyage et entretien 3. Ouvrez complètement la porte du four. 4. Rabattez le levier de serrage (A) situé sur les deux charnières de la porte dans leur position d’origine.. 5.
Que faire si … 47 Que faire si … Symptômes Le four ne chauffe pas. Cause possible Solution Le four n’est pas allumé. Allumer le four L’heure du jour n’est pasréglée. Régler l’heure du jour Les réglages nécessaires n’ont pas été effectués correctement. Contrôler tous les réglages. L’arrêt automatique du four est activé. Voir arrêt automatique Le fusible de sécurité de l’instal- Contrôler le fusible. Si les fusilation domestique (disjoncteur) bles sautent plusieurs fois, cons’est déclenché.
Protection de l’environnement Protection de l’environnement 2 Elimination du matériel d’emballage Les matériaux d’emballage sont écologiques et recyclables. Les matières plastiques portent un signe distinctif, par ex. >PE<, >PS<, etc. Déposez les matériaux d’emballage en fonction de leur signe distinctif dans les containeurs prévus à cet effet (renseignez-vous auprès des services de votre commune).
Instructions d'installation 49 Instructions d'installation 1 Avertissement : Le montage et le branchement du nouvel appareil sont du ressort exclusif de spécialistes agréés. Pour ne pas perdre le bénéfice de la garantie en cas de panne, veuillez observer ces recommandations. 1 Consignes de sécurité pour l’installateur • Prévoir, pour l’installation électrique, un dispositif permettant de débrancher l’appareil du secteur au niveau de tous les pôles une ouverture des contacts d’au moins 3 mm.
Instructions d'installation
Instructions d'installation 51
Garantie/Si vous devez nous contacter Garantie France Conformément à la Législation en vigueur, votre Vendeur est tenu, lors de l'acte d'achat de votre appareil, de vous communiquer par écrit les conditions de garantie et sa mise en œuvre appliquées sur celui-ci. Sous son entière initiative et responsabilité, votre Vendeur répondra à toutes vos questions concernant l'achat de votre appareil et les garanties qui y sont attachées. N'hésitez pas à le contacter.
Garantie/Si vous devez nous contacter 53 www.electrolux.com p t b Albania +35 5 4 261 450 Rr. Pjeter Bogdani Nr. 7 Tirane Belgique/België/ Belgien +32 2 363 04 44 Bergensesteenweg 719, 1502 Lembeek Èeská republika +420 2 61 12 61 12 Budìjovická 3, Praha 4, 140 21 Danmark +45 70 11 74 00 Sjællandsgade 2, 7000 Fredericia Deutschland +49 180 32 26 622 Fürther Straße 246, 90429 Nürnberg Eesti +37 2 66 50 030 Mustamäe tee 24, 10621 Tallinn España +34 902 11 63 88 Carretera M-300, Km.
Garantie/Si vous devez nous contacter p t b Türkiye +90 21 22 93 10 25 Tarlabaþý caddesi no : 35 Taksim Istanbul Ðîññèÿ +7 495 937 7837 129090 Ìîñêâà, Îëèìïèéñêèé ïðîñïåêò, 16, ÁÖ „Îëèìïèê“ Óêðà¿íà +380 44 586 20 60 04074 Êè¿â, âóë.
Service après-vente 55 Service après-vente En cas d’anomalie de fonctionnemet vérifiez d’abord si vous ne pouvez pas remédier vous-même au dysfonctionnement à l’aide de la notice d’utilisation (chapitre “Que faire, si...“). Si vous ne parvenez pas à remédier au dysfonctionnement, veuillez contacter votre vendeur ou à défaut le Centre Contact Consommateurs qui vous communiquera l’adresse service après-vente.
www.electrolux.com 387 996 271-B-290909-02 Sous réserve de modifications www.aeg-electrolux.fr www.aeg-electrolux.