User manual

WARNING!
The meat probe is hot! There is the risk of burns! Be careful when you remove the point
of the meat probe and the meat probe.
9. Switch off appliance.
For the meat programmes with the meat probe, refer to the automatic programmes.
Changing the core temperature
1. Use
again and again until the display shows MEATPROBE .
2. Use
or to change the core temperature.
The core temperature is displayed from 30°C.
Automatic programmes
These 3 automatic programmes give optimum settings for each type of meat or other
recipes:
• Meat programmes with weight input ( OVEN FUNCTIONS menu)
• Meat programmes with meat probe ( OVEN FUNCTIONS menu)
• Automatic recipes (Options menu)
Meat programmes with weight input
If you set the weight of the meat, the appliance calculates the roasting time.
1.
Use
or to set the meat pro-
gramme.
The weight flashes.
2. While the weight flashes, use
or
to set the weight of the meat.
The setting changes in steps of 0.1 kg
(for POULTRY in steps of 0.2 kg).
The display shows the length of the programme. The time counts down.
If you do not change the weight in less than 5 seconds, the meat programme starts. To
change the weight after the programme starts, use
in less than 2 minutes after the
programme starts.
3. For POULTRY meat programme turn the food when you hear an acoustic signal and
the display shows TURN-OVER MEAT .
When the meat programme is completed, you will hear an acoustic signal.
Meat programmes with meat probe
When you install the meat probe, you can find more meat programmes in the OVEN FUNC-
TIONS menu.
POULTRY 2,5 KG
14
Daily use