User manual

Folding down the heating element
1. Remove the shelf support rails.
2. Hold the heating element with the two
hands at the front
3. Pull it forwards against the spring pres-
sure and out along the support on both
sides.
4. The heating element folds down.
The oven ceiling is ready to clean.
Installing the heating element
1. Install the heating element in opposite
sequence.
Install the heating element correctly on the two sides above the support on the inner
wall of the oven.
2. Insert shelf support rails.
Telescopic shelf runners
You can remove the telescopic runners to clean the side walls.
Removing the telescopic runners
1. Pull the front of the telescopic runners
away from the side wall.
2. Pull the telescopic runners from the rear
side of the wall and remove the telescop-
ic runners.
Installing the telescopic runners
Install the telescopic runners in the opposite sequence.
The retaining pins on the telescopic shelf runners must point to the front!
CAUTION!
1
2
Care and cleaning
23