B99697-5 B99698-5 User manual Oven
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance.
Safety information Cleaning the oven door Inserting the glass panels WHAT TO DO IF… INSTALLATION 24 25 26 27 Building In Electrical installation ENVIRONMENT CONCERNS 27 29 29 Subject to change without notice SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your personal safety and the safety of your property • For the respect of the environment • For the correct operation of the appliance.
Safety information • Make sure that the appliance is disconnected from the power supply during the installation. • Be careful when you move the appliance. The appliance is heavy. Always use safety gloves. Do not pull the appliance by the handle. • The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.
Safety information 5 • Do not put flammable products or items that are wet with flammable products, and/or fusible objects (made of plastic or aluminium) in, near or on the appliance. There is the risk of explosion or fire. • The interior of the appliance becomes hot during use. There is the risk of burns. Use gloves when you insert or remove the accessories or pots. • Be careful when you remove or install the accessories to prevent damage to the oven enamel.
Safety information • Keep children away during pyrolytic cleaning. The appliance becomes very hot. There is the risk of burns. • During pyrolytic cleaning, stubborn dirt can cause discoloration to the enamel. Discoloration to the enamel has no effect on the performance of the appliance Risk of fire • Open the door carefully. The use of ingredients with alcohol can cause a mixture of alcohol and air. There is the risk of fire.
Product description 7 PRODUCT DESCRIPTION General overview 1 2 3 4 5 7 6 1 2 3 4 5 6 7 Electronic programmer Ventilation openings Grill Oven lamp Telescopic runners Fan Rating plate Oven accessories • Wire shelf For cookware, cake tins, roasts. • The deep roasting pan with removable handles To put food when using grill function. • The roasting pan grid To put in the deep roasting pan. Touch controls Touch controls control all the oven functions.
Control panel Make sure you touch just one control at a time. To set a cooking function touch and hold. CONTROL PANEL Indicators 1 2 3 XXXXX XXXX 8 1 2 3 4 5 6 7 8 7 6 5 4 Symbol status bar Menu status bar Text line Clock functions. Period of operation Shelf levels Time Heat indicator Temperature Menu status bar Indication Function A bar in the status bar flashes. The position in a menu is shown. The status bar is not shown. • The appliance starts to heat.
Before first use Button 9 Function To confirm or open the menu. To switch the appliance on or off. To switch the rapid heat-up function on or off. To select clock function. To set values (e.g. temperature, time, weight, degree of cooking). BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Remove all packaging, both inside and outside the oven, before using the appliance. Do not remove the rating plate. Setting the language 1. Connect the appliance to the power supply.
Daily use 1. 2. 3. 4. 5. Open the door. Remove the accessories from the appliance. Clean the accessories with warm water and a rinsing agent. Dry the accessories. Clean the appliance with warm water and a rinsing agent. Dry the appliance. Clean the front of the appliance with a moist cloth. CAUTION! To open the oven door, always hold the handle in the centre. Preheating After initial cleaning preheat the appliance without food. During this period an odour can be emitted. This is normal.
Daily use Oven functions menu SINGLE GRILL KEEP WARM DEFROST BASE HEAT POULTRY PORK BEEF VEAL GAME Use to access the Options menu from the Oven functions menu. Options menu RECIPE MENU MEMORY MENU CLEANING MENU SETTING MENU Use to access the Options submenu from the Options menu. Options submenu HEAT+HOLD MENU EXTRA TIME MENU RAPID HEAT UP MENU RESIDUAL HEAT MENU SOUND MENU LANGUAGE MENU FACTORY SETTINGS Options menu 1. Use to open the Options menu. or to set the menu option. 2.
Daily use Canceling a selection Push and hold to cancel a setting procedure. The display shows OVEN FUNCTIONS menu. Oven functions Function Application LIGHT The oven lamp is on without any cooking function. TRUE FAN To bake food on a maximum of three levels at the same time. Set the oven temperature 20°C - 40°C lower than for Conventional. FAN BAKING To bake food with more intensive browning and a crispy base on one level. Set the oven temperature 20°C - 40°C lower than for Conventional.
Daily use 13 Setting the oven function Use or to set the oven function. The display shows the recommended temperature. The appliance starts to heat. When the appliance operates at the set temperature, you can hear an acoustic signal. Changing the oven temperature Use or to set the temperature. Showing the oven temperature and at the same time the display shows the temperature in the When you use oven. In case of a power cut, most of the settings are cancelled.
Daily use 4. Put the food in the appliance. If you generally prefer to put food into a pre-heated oven, you can switch on RAPID HEAT UP function permanently (refer to SETTINGS MENU ). Then you can switch off RAP. ID HEAT UP function with the button Heat-up function If you switch on an oven function, the bars on the display come on one by one to show that the heat / oven temperature increases.
Clock functions MENU BASE SETTING ERROR TONE Off 15 DESCRIPTION If you do a step that cannot be done, you cannot hear an acoustic signal. LANGUAGE MENU • English • ...... To set the language in the display. FACTORY SETTINGS RESTORE SETTINGS To go back to the factory settings. Adjusting the SETTINGS MENU 1. 2. 3. 4. 5. Use to open the Options menu. or to set SETTINGS MENU . Use to open SETTINGS MENU . Use or to go to the necessary setting. Use . Use The display shows the set value. 6.
Automatic programmes Setting the clock functions 1. Use again and again until the display shows the necessary clock function and the related symbol, for example MINUTE MINDER . or to set the necessary time. 2. Use You can hear an acoustic signal for 2 minutes when the time is completed. The appliance switches off. “00.00” and the related function indicator flash. 3. Use any button to switch off the acoustic signal. With MINUTE MINDER the oven must be switched on to set the clock function.
Automatic programmes 17 1. Use or to set the meat programme. The weight flashes. or to set the weight of the meat. 2. While the weight flashes, use The setting changes in steps of 0.1 kg (for POULTRY in steps of 0.2 kg). The display shows the length of the programme. The time counts down. If you do not change the weight in less than 5 seconds, the meat programme starts. To . change the weight after the programme starts, touch 3.
Automatic programmes 6. When the cooking time is completed, “00:00” and switches off and you can hear an acoustic signal. Use any button to switch off the acoustic signal. flash, the oven heating Delaying the start time If the programme operates for less than 2 minutes, you can delay the start of a programme (refer to clock function END). Stopping the cooking time early and • Push and hold or to set the menu option BACK . • Use Memory menu You can save the optimum settings for your personal recipes.
Using the accessories 19 Overwriting a memory position You can overwrite full memory positions. Refer to “Saving settings for personal recipes”. to set the recipe that you want to overwrite. At step 4 of the procedure, use USING THE ACCESSORIES WARNING! Refer to "Safety information" chapter. Telescopic runners With telescopic runners you can put and remove the shelves more easily. 1. Pull out the right and left hand telescopic runners. 2.
Additional functions Switching on the child lock 1. If necessary, switch on the appliance. Do not set an oven function. 2. Use and at the same time until the display shows CHILD LOCK . The CHILD LOCK is on. Switching off the child lock 1. If necessary, switch on the appliance. 2. Use and at the same time until the display stops to show CHILD LOCK . CHILD LOCK switches off. BUTTON LOCK BUTTON LOCK prevents that you accidentally change the oven functions. Switching on BUTTON LOCK 1.
Helpful hints and tips 21 Safety thermostat To prevent dangerous overheating (due to incorrect use of the appliance or defective components), the oven has a safety thermostat, which interrupts the power supply. The oven switches back on again automatically, when the temperature drops. HELPFUL HINTS AND TIPS WARNING! Refer to "Safety information" chapter. • The appliance has four shelf levels. Count the shelf levels from the bottom of the appliance floor.
Care and cleaning Information on acrylamides Important! According to the newest scientific knowledge, if you brown food (specially the one which contains starch), acrylamides can pose a health risk. Thus, we recommend that you cook at the lowest temperatures and do not brown food too much. CARE AND CLEANING WARNING! Refer to "Safety information" chapter. • Clean the front of the appliance with a soft cloth with warm water and cleaning agent.
Care and cleaning 2. Pull the shelf runners from the back of the side wall to remove the shelf support rails. 23 2 1 Installing the shelf support rails Install the shelf support rails in opposite sequence. The rounded ends of the shelf support rails must point to the front! Pyrolytic cleaning WARNING! Keep children away during pyrolytic cleaning. The appliance becomes very hot. There is risk of burns. Before pyrolytic cleaning, remove all removable parts (the shelf support rails, the accessories, etc.
Care and cleaning Reminder function for pyrolytic cleaning The reminder function tells the user when pyrolytic cleaning is necessary. The reminder function switches on when you set the appliance to the factory settings. Switch on and off the reminder function in the options menu with CLEANING MENU . Setting the reminder function: 1. The displays shows PYROLUXE? for some time after an oven function is completed. Use to confirm. or to set one of these settings: 2.
Care and cleaning Removing the glass panels 1 2 3 4 Inserting the glass panels After the cleaning, install the panels of glass in the opposite sequence. Make sure you put the glass panels back in the correct order. First glass panel has a black frame, the second a small dot on a upper right corner and the third one has no marking. Refer to the illustration. The panel with black frame must be assembled with the screen-printing outside of the oven.
What to do if… Make sure the you put the stop as in the illustration. It is not possible to reverse the oven door. WHAT TO DO IF… WARNING! Refer to "Safety information" chapter. Problem Possible cause Solution The oven does not operate The appliance is not correctly connected or/and the mains supply to the oven is not on Check if the appliance is correctly connected and the mains supply to the oven is on. The oven does not operate The oven is switched off.
Installation Problem Possible cause 27 Solution It takes too long to finish the dishes or they are cooked too fast Incorrect settings Refer to the cooking function sections and to any cooking chart provided. Steam and condensation settle on the food and in the oven cavity Dishes have been left in the oven for too long Do not leave the dishes standing in the oven for longer than 15-20 minutes after the cooking process ends The display shows an error message (for example "F....
Installation In column building-in 50 587 550 min. 70 560-5 Building-in under kitchen counter 80-100 600 550 min.
Environment concerns 29 Electrical installation The manufacturer is not responsible if you do not obey the safety precautions from chapter "Safety". This appliance is supplied without a main plug and a main cable. Applicable types of cables for Europe: • Minimum size Cable/flex: 1,5mm² • Cable/ flex type: H07 RN-F, H05 RN-F, H05 RRF, H05 VV-F, H05 V2V2-F (T90), H05 BBF • Fuse 13 A Applicable types of cables for UK only Connection via Min.
359051404-C-332010 www.aeg-electrolux.
