BO G Z Notice d’utilisation Four électrique encastrable
Sommaire Nous vous remercions d’avoir choisi l’un de nos produits de qualité. Afin de garantir une performance optimale et constante de votre appareil, veuillez lire attentivement cette notice d'utilisation. Il vous permettra d’utiliser correctement et efficacement toutes les fonctions de l’appareil. Nous vous recommandons de conserver cette notice à proximité pour une utilisation rapide et optimale.
Notice d'utilisation 3 Notice d'utilisation 1 Avertissements importants Sécurité de l’installation électrique • Le branchement de l’appareil est du ressort exclusif d’un technicien qualifié. • En cas de dysfonctionnements ou de dommages sur l’appareil : retirez les fusibles ou mettez l’appareil hors tension • Les réparations de l’appareil sont du ressort d'un service après vente. Les réparations inadéquates peuvent occasionner de graves dangers.
Avertissements importants • Les jus de fruits qui s’égouttent des plaques à pâtisserie laissent des taches qui sont ensuite indélébiles. Pour faire cuire des gâteaux très juteux, utilisez une plaque à fond creux. • Sur la porte ouverte du four, ne posez pas de charge lourde et assurez-vous qu'un enfant ne puisse ni monter, ni s'asseoir. • Ne versez jamais d’eau dans le four lorsqu’il est brûlant. Cela pourrait endommager l’émail et provoquer des décolorations.
Description de l'appareil 5 Description de l'appareil Vue d'ensemble Bandeau de commande Poignée de la porte Porte en verre Bandeau de commandes Voyant de fonctionnement Voyant de température Indication du temps Touches Fonction de l´horloge Fonctions du four Sélection température
Description de l'appareil Equipement du four Voûte et élément chauffant du gril Eclairage du four Niveaux de gradin Élément chauffant arrière Ventilateur Sole Gradin fil, amovible Accessoires du four Grille Elle permet de poser des plats (rôtis, gratins), les moules à pâtisserie, etc.
Avant la première utilisation Rôtissoire À utiliser pour rôtir des aliments ou pour recueillir les graisses. Avant la première utilisation Régler et modifier l’heure du jour 3 Le four ne fonctionne qu’après le réglage de l’heure du jour. Après le branchement électrique ou après une coupure de courant, le voyant correspondant à la fonction Heure clignote automatiquement. 1.
Commande du four Premier nettoyage Avant d'utiliser le four pour la première fois, vous devez le nettoyer. 1 Attention: N'utilisez pas d'agents de nettoyage agressifs ou abrasifs! La surface pourrait être endommagée. 3 Pour les faces frontales métalliques, utilisez un produit de nettoyage du commerce. 1. 2. 3. 4. Mettez le sélecteur de fonction du four sur éclairage du four . Retirez tous les accessoires et grilles et nettoyez-les avec de l'eau savonneuse chaude.
Commande du four 9 Le voyant de fonctionnement reste allumé aussi longtemps que le four est en fonctionnement. Le voyant de température reste allumé aussi longtemps que le four chauffe. 3. Pour éteindre le four, positionnez l’interrupteur fonctions Four et le sélecteur de température sur Arret. 3 Ventilateur de refroidissement Le ventilateur s'enclenche automatiquement afin de maintenir les parois de l’appareil froides.
Commande du four Veuillez toujours placer les éléments à encastrer de telle façon que cette voûte se trouve derrière dans l’espace de cuisson. Cette voûte est également importante pour la protection anti-renversement des éléments à encastrer. Insertion de la plaque du four : Poussez la plaque du four entre les barres d’insertion du niveau de l’utilisation que vous avez sélectionnée. Installation de la grille : Placez la grille de manière à ce que les deux tiges de guidage soient orientées vers le bas.
Commande du four 11 Fonctions de l'horloge Indic. fonctions Touche Indication du temps Touche de sélection Indic. fonctions Touche Minuterie Pour régler le minuteur. Un signal sonore retentit lorsque la durée sélectionnée est écoulée. Cette fonction est sans effet sur le fonctionnement du four. Duree Pour régler la durée de cuisson. Fin Pour régler I´heure de fin de cuisson. Heure Pour régler, modifier ou consulter l'heure. (Voir également le chapître «Avant la première utilisation»).
Commande du four Minuterie 1. Appuyez sur la touche Sélection , jusqu’à ce que le voyant correspondant à la fonction Minuterie clignote. 2. A l’aide de la touche ou , sélectionnez le départ différé souhaité (max. 2 heures (30). Au bout d’env. 5 secondes, le voyant affiche le temps restant. Le voyant correspondant à la fonction Minuterie s’allume. Lorsque le délai est écoulé, le voyant correspondant à la fonction clignote et un signal sonore retentit pendant 2 minutes.
Commande du four Duree 1. Appuyez sur la touche Sélection , jusqu’à ce que le voyant correspondant à la fonction Duree clignote. 2. A l’aide de la touche ou , sélectionnez la durée de cuisson souhaitée. Au bout d’env. 5 secondes, le voyant permute sur l’heure du jour. Le voyant correspondant à la fonction Duree s’allume. Lorsque le délai est écoulé, le voyant correspondant à la fonction clignote et un signal sonore retentit pendant 2 minutes. 3.
Commande du four Fin 1. Appuyez sur la touche Sélection , jusqu’à ce que le voyant correspondant à la fonction Fin clignote. 2. A l’aide de la touche ou , sélectionnez l’heure de désactivation souhaitée. Au bout d’env. 5 secondes, le voyant repermute sur l’heure du jour. Le voyant correspondant à la fonction Fin s’allume. Lorsque le délai est écoulé, le voyant correspondant à la fonction clignote et un signal sonore retentit pendant 2 minutes et le four s’éteint. 3.
Conseils d’utilisation et guide des cuissons 15 1. La fonction Duree permet de régler la durée nécessaire à la cuisson d’une préparation, 1 heure dans ce cas. 2. La fonction Fin permet de régler l’heure à laquelle la préparation doit être cuite, 14:05 heure dans ce cas. Les voyants correspondants aux fonctions Duree et Fin s’allument et le bandeau de commande affiche l’heure du jour, 12:05 heure dans ce cas. Le four s’allume automatiquement à l’heure sélectionnée, à 13:05 heure dans ce cas.
Conseils d’utilisation et guide des cuissons Niveaux de gradin • La fonction Cuisson tradition permet seulement de faire cuire une préparation sur un seul niveau de gradin. • La fonction Chaleur tournante permet de faire cuire une préparation sur deux ou trois niveaux de gradin à la fois : 1 plaque à pâtisserie : par ex. niveau de gradin 3 1 plat à cuisson : par ex. niveau de gradin 1 2 plaques à patisserie : par ex.
Conseils d’utilisation et guide des cuissons 17 • Ces indications de température etde durée de cuisson sont seulement des valeurs indicatives puisqu’elles dépendent de la composition de la pâte, de la quantité d’ingrédients et du type de plat de cuisson.
Conseils d’utilisation et guide des cuissons Type de pâtisserie Fonction du four Niveau de gradin Température °C Durée heures min Tourte aux pommes (2moules Ø20cm, disposés en diagonale) Cuisson tradition 1 180 1:10-1:30 Tartes salées (par ex.
Conseils d’utilisation et guide des cuissons Type de pâtisserie Fonction du four 19 Niveau de gradin Température °C Durée heures min Macarons Chaleur tournante 3 100-120 0:30-0:60 Petits gâteaux secs pâte levée Chaleur tournante 3 150-160 0:20-0:40 Petits gâteaux secs pâte feuilletée Chaleur tournante 3 170-1801) 0:20-0:30 Petits pains Chaleur tournante 3 1601) 0:20-0:35 Petits pains Cuisson tradition 3 1801) 0:20-0:35 1) Petits cakes (20/plaque) Chaleur tournante 3 140
Conseils d’utilisation et guide des cuissons Conseils de cuisson Qualité de la cuisson Cause possible Le dessous du gâteau est Le gâteau n'est pas assez trop clair enfoncé dans le four Solution Enfoncez le gâteau plus avant dans le four Le gâteau se désagrège La température de cuisson est trop Réduisez la température (il devient pâteux, s’ar- élevée rondit, de l’eau s’écoule) La durée de la cuisson est trop Prolongez la durée de la cuisson courte Une température de cuisson plus élevée ne permet pas
Conseils d’utilisation et guide des cuissons 21 Tableau Sole pulsee Niveau de gradin Température °C Durée en h : min.
Conseils d’utilisation et guide des cuissons Tableau des surgeléset des plats cuisinés Produits à cuire Fonctions dufour Niveaude cuisson Température °C Temps Pizza surgelée Cuisson tradition 3 selon les indicationsdu fabricant selon les indicationsdu fabricant frites1) (500 g) Chaleur tournante 3 200-220 selon les indicationsdu fabricant Baguettes Cuisson tradition 3 selon les indicationsdu fabricant selon les indicationsdu fabricant Tarte aux fruits Cuisson tradition 3 selon le
Conseils d’utilisation et guide des cuissons 23 Tableau de rôtissage Nature de la viande Quantité Fonctions Four Niveau de gradin Température °C Durée en h : min 1 200-250 2:00-2:30 Viande de bœuf Bœuf braisé 1-1,5 kg Cuisson tradition Par cm d’épaisseur Rosbif ou filet - bleu Par cm d’épaisseur Turbo gril 1 1902001) 0:05 - 0:06 - saignant Par cm d’épaisseur Turbo gril 1 180-190 0:06 - 0:08 - cuit à point Par cm d’épaisseur Turbo gril 1 170-180 0:08 - 0:10 Epaule, collet, mo
Conseils d’utilisation et guide des cuissons Niveau de gradin Température °C Durée en h : min Turbo gril 1 200-220 0:35-0:50 De chacun 400-500g Turbo gril 1 190-210 0:35 - 0:50 Poulet, poule 1-1,5 kg Turbo gril 1 190-210 0:45 - 1:15 Canard 1,5-2 kg Turbo gril 1 180-200 1:15 - 1:45 Oie 3,5-5 kg Turbo gril 1 160-180 2:30 - 3:30 Dinde/dindonneau 2,5-3,5 kg Turbo gril 1 160-180 1:45-2:30 Dinde/dindonneau 4-6 kg Turbo gril 1 140-160 2:30 - 4:00 1-1,5 kg Cuisson tra
Conseils d’utilisation et guide des cuissons Nature de l’aliment à griller 25 Durée de la grillade Niveau de gratin 1. Côté 2. Côté Filet de bœuf, rosbeef (env 1 kg) 3 10-12 min 10-12 min Pains toastés1)g 3 4-6 min 3-5 min Toasts garnis 3 6-8 min --- 1) Sans la préchauffer Décongélation Fonction Four : Décongélation (sans réglage de la température) • Enlevez les aliments de leur emballage, posez-les dans une assiette puis sur la grille du four.
Conseils d’utilisation et guide des cuissons • Pour obtenir de meilleurs résultats, éteignez le four à la moitié du temps de desséchage, ouvrez la porte du four et laissez refroidir pendant toute la nuit. • L’aliment sera alors parfaitement desséché.
Nettoyage et entretien 27 Tableau de cuisson pour les conserves Les durées de cuisson et les températures indiquées sont des valeurs indicatives.
Nettoyage et entretien 1. Allumez l’éclairage du four pour le nettoyer. 2. Après chaque utilisation, nettoyez le four avec de l’eau et du liquide vaisselle puis essuyez-le. 3 1 Eliminez les salissures tenaces à l’aide de détergents spécifiques pour fours. Avertissement : En cas d’utilisation d’un spray de nettoyage du four, il est impératif de respecter les consignes du fabricant. Accessoires Rincez les accessoires (grille, plat, ...) après chaque utilisation et faites-les bien sécher.
Nettoyage et entretien 29 Pour la mise en place, accrochez d'abord la grille dans le haut (1) et insérez-la ensuite à l'avant, puis appuyez dessus (2). Eclairage du four 1 Avertissement : Risque d'électrocution ! Avant de remplacer la lampe du four : – Mettez le four hors service ! – Enlevez les fusibles ou débranchez les disjoncteurs de l’armoire à fusibles. 3 Placez un torchon sur la sole du four afin de protéger la lampe du four et le verre de protection.
Nettoyage et entretien Rabattre l'élément chauffant 1 1 Avertissement: Ne rabattez l'élément chauffant que lorsque le four est hors service et qu'il n'y a plus de danger de brûlure! 1. Enlevez le gradin fil latéral. 2. Saisissez l'élément chauffant à l'avant et tirezle vers l'avant au-dessus de l'estampage à la paroi intérieure du four. 3. L'élément chauffant se rabat vers le bas. Attention: Ne forcez pas l'élément chauffant vers le bas! Si on le force, l'élément chauffant peut casser.
Nettoyage et entretien Porte du four Afin de faciliter le nettoyage, il est possible de démonter la portedu four. Décrochage de la porte du four 1. Ouvrez complètement la porte du four. 2. Relevez complètement le levier de serrage (A) situé sur les deux charnières de la porte. 3. Saisissez la porte à deux mains sur les côtés et fermez-la jusqu’à atteindre la première position d’accrochage (env. 45°). 4.
Nettoyage et entretien Accrochage de la porte du four 1. Saisissez chaque côté de la porte du four, côté poignée vers soi et en bas, et maintenez-la dans un angle d’env. 45°. Introduisez simultanémentles charnières situées dans la partie inférieure de la porte dans les deux charnières présentes dans le bas du four. Baissez la porte vers le bas, jusqu’au point de résistance. 2. Ouvrez complètement la porte du four. 3.
Nettoyage et entretien 33 Démontage des vitres de la porte 1. Ouvrez complètement la porte du four. 2. Relevez complètement le levier de serrage (A) situé sur les deux charnières de la porte. 3. Saisissez la porte à deux mains sur les côtés et fermez-la jusqu’à atteindre la première position d’accrochage (env. 45°). 4.
Nettoyage et entretien Montage des vitres de la porte 1. Insérez les vitres de la porte l’une après l’autre, en oblique par le haut, dans le profil de la porte situé au niveau de l'arête inférieure de la porte, puis abaissezles. 3 Installez d’abord la plus petite vitre, et la plus grande en dernier lieu. 2. Saisissez le support de la porte (B) sur les côtés, appliquez-le dans sa position d'origine sur le bord intérieur de la porte et fixez-le sur l'arête supérieure de la porte.
Que faire si … 35 3. Ouvrez complètement la porte du four. 4. Rabattez le levier de serrage (A) situé sur les deux charnières de la porte dans leur position d’origine.. 5.
Protection de l’environnement 1 Avertissement ! L'installation, le branchement et les réparations doivent être effectuées uniquement par des professionnels qualifiés. Des réparations non effectuées dans les règles peuvent s’avérer très dangereuses pour l’utilisateur. 3 En cas d’erreur de manipulation de la part de l’utilisateur, le déplacement du technicien du service après-vente ou du vendeur peut être facturé même en cours de garantie.
Instructions d'installation 37 Instructions d'installation 1 Avertissement : Le montage et le branchement du nouvel appareil sont du ressort exclusif de spécialistes agréés. Pour ne pas perdre le bénéfice de la garantie en cas de panne, veuillez observer ces recommandations. 1 Consignes de sécurité pour l’installateur • Prévoir, pour l’installation électrique, un dispositif permettant de débrancher l’appareil du secteur au niveau de tous les pôles une ouverture des contacts d’au moins 3 mm.
Instructions d'installation
Instructions d'installation 39
Garantie/Kundendienst, Garantie/service-clientèle, Garanzia/Servizio clienti, Guarantee/Customer Service Centres Servicestellen 5506 Mägenwil/Zürich Industriestrasse 10 9000 St.
Service après-vente 41 Service après-vente En cas d’anomalie de fonctionnemet vérifiez d’abord si vous ne pouvez pas remédier vous-même au dysfonctionnement à l’aide de la notice d’utilisation (chapitre “Que faire, si...“). Si vous ne parvenez pas à remédier au dysfonctionnement, veuillez contacter votre vendeur ou à défaut le Centre Contact Consommateurs qui vous communiquera l’adresse service après-vente.
892 9370 64-A-130809-01 Sous réserve de modifications www.electrolux.com www.aeg.