BP7004001 EN OVEN USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 7 9 9 11 13 16 17 19 21 25 26 Safety information Product description Before first use Control panel Daily use Clock functions Automatic programmes Using the accessories Additional functions Care and cleaning What to do if… Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your personal safety and the safety of your property • For the respect of the environment • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it. The manufacturer is not responsible if incorrect installation or use results in damage.
Safety information 5 • Before the installation, make sure that the kitchen cabinet has the recess dimensions applicable. • Make sure that the appliance is installed below and adjacent safe structures. • Keep the minimum distances to the other appliances and units. • The appliance cannot be positioned on a base. • Built in ovens and built in cooking surfaces are attached with special connection system. To prevent damage to the appliance, only use an appliance with the appliances from the same manufacturer.
Safety information • Always close the appliance door when you cook, even while grilling. Care and cleaning • Before maintenance, switch off the appliance and disconnect the appliance from the power supply. • Before maintenance, make sure that the appliance is cold. There is the risk of burns. There is the risk that the glass panels can break. • Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a fire.
Product description 7 • Disconnect the appliance from the power supply before the replacement of the oven lamp. There is the risk of electrical shock. Service centre • Only an approved engineer can repair or work on the appliance. Contact an approved service centre. • Use only original spare parts. Disposal of the appliance • To prevent the risk of physical injury or damage – Disconnect the appliance from the power supply. – Cut off the mains cable and discard it. – Discard the door catch.
Product description 5 6 7 8 9 10 Oven lamp Fan Rear wall heating element Bottom heat Shelf support, removable Shelf positions Accessories • Wire shelf For cookware, cake tins, roasts. • Baking tray For cakes and biscuits. • Combi pan For cake and biscuits. To bake and roast or as pan to collect fat. • Core Temperature Sensor To measure how far the food is cooked.
Before first use 9 BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Initial Cleaning • Remove all parts from the appliance. • Clean the appliance before first use. Refer to chapter "Care and Cleaning". First connection to the mains After first connection to the mains all symbols in the display are on for some seconds. For the subsequent few seconds the display shows software version. First setting the time of day After the software version goes off, the display shows "h" and "12:00".
Control panel Sensor Field Function Description 2 ON/OFF To activate and deactivate the appliance. 3 OPTIONS To set an oven function or programme. Straight access to the oven function when the appliance is off. 4 MY FAVOURITE PROGRAMME You can store your favourite programme. Use it to access your favourite programme directly, also when the appliance is off. 5 TEMPERATURE / FAST HEAT UP To set and examine cavity temperature or core temperature sensor temperature.
Daily use 4 5 6 7 11 Residual heat indicator Indicators for the clock functions (refer to the table "Clock functions") Heat up indicator Number of oven function/programme Other indicators of display Symbols / / Name Description Function You can choose an oven function. Automatic programme You can choose an oven programme. My favourite programme The favourite programme operates. kgr/gr An oven programme with weight input operates. h/min A clock function operates.
Daily use If you activate the appliance with or and do not set any oven function or programme the appliance will deactivate automatically after 20 seconds. Oven function Application 1 True Fan Cooking To bake maximum on three shelf positions at the same time. Decrease the oven temperatures (20-40 °C) compared with Conventional. And to dry food. 2 Pizza Setting To bake on one shelf position food with a more intensive browning and a crispy base.
Clock functions Examining the oven temperature You can examine the temperature in the appliance when the function or programme operates. . 1. Touch The Temperature/Time display shows the temperature in the appliance. If you want to change the oven temperature, touch 2. one more time and use or . to go back to the set temperature or the display will show it automatically Touch after five seconds. Fast heat up function The fast heat up function decreases the heat up time.
Clock functions SYMBOL FUNCTION DESCRIPTION DURATION To set how long the appliance operates. END To set when the appliance deactivates. You can use Duration and End at the same time (Time delay), if the appliance is to be activate and deactivate automatically later. SET+GO To start the appliance with necessary settings with only one touch of the sensor field, any time later. Count Up Timer Use the Count Up Timer to monitor how long the appliance operates.
Clock functions 6. 15 Deactivate the appliance. Setting the SET+GO To start of the appliance with necessary settings with only one touch of the sensor field, any time later. 1. Set an oven function (or programme) and temperature (refer to "Setting the oven function" and "Changing the oven temperature"). 2. Set DURATION (refer to "Setting the DURATION"). 3. Touch again and again until will flash in the display. to set the SET+GO function. 4. Touch The display shows and with a dot.
Automatic programmes AUTOMATIC PROGRAMMES WARNING! Refer to "Safety information" chapter. There are 20 automatic programmes and recipes. Use an automatic programme or recipe when you do not have a knowledge or experience how to prepare a dish. You can find the recipes for the automatic programmes in the "Recipe book".
Using the accessories 4. 5. 6. 17 When a core temperature sensor programme is set, the display shows the cooking . time, and or the settings save automatically after five seconds. Touch When set time ends, an acoustic signal operates for two minutes. flashes. The appliance deactivates. Touch any sensor field or open the oven door to stop an acoustic signal. USING THE ACCESSORIES WARNING! Refer to "Safety information" chapter.
Using the accessories The display shows the current core temperature and (which shows the relation between the set oven temperature and the current oven temperature). The core temperature sensor must stay in the meat and in the socket during the cooking. While the appliance calculates the approximate duration time, the value of the Count Up Timer function shows in the Timer/Residual heat display.
Additional functions 19 Installing the wire shelf and the deep pan together Put the wire shelf on the deep pan. Push the deep pan between the guide-bars of one of the oven levels. ADDITIONAL FUNCTIONS My Favourite Programme function Use this function to save your favourite settings of temperature and time for an oven function or programme. 1. Set the temperature and time for an oven function or programme. 2. Touch and hold for more than three seconds. An acoustic signal sounds. 3.
Additional functions Activating/deactivating the control lock function: 1. Activate the appliance. 2. Activate an oven function or setting. at the same time for 2 seconds. An acoustic signal sounds. 3. Touch and hold and Loc comes on/goes out in the display. You can deactivate the appliance when the control lock is on. When you deactivate the appliance, the control lock deactivates. If the oven has the Pyro cleaning function, the door is locked. Loc comes on in the display when you touch a sensor field.
Care and cleaning 21 • if you do not change the oven temperature. Oven temperature Switch-off time 30 °C -120 °C 12.5 h. 120 °C - 200 °C 8.5 h. 200 °C -250 °C 5.5 h. 250 °C -maximum °C 3.0 h. After an automatic switch-off, touch a sensor field to operate the appliance again. The Automatic switch-off works with all oven functions, apart from Light, Low temperature cooking, core temperature sensor, Duration, End, Time delay.
Care and cleaning Pyrolytic cleaning 1. Remove all parts from the appliance. The pyrolytic cleaning procedure cannot start: – If you do not remove the shelf support or telescopic runners (if present), the display shows "C1" – If you do not remove the core temperature sensor plug from the socket, the display shows „C2“ – If you do not close the oven door correctly, the display shows „C3“. 2. Remove the worst of the residual dirt manually. 3.
Care and cleaning 23 Removing the shelf support 1. Pull the front of the shelf support away from the side wall. 2. Pull the shelf support from the back of the side wall to remove it. To install the shelf support follow the procedure in reverse. Valid with telescopic runners: The retaining pins on the telescopic shelf runners must point to the front! 2 1 Oven lamp WARNING! There is a risk of electrical shock. The oven lamp and the lamp glass cover can be hot.
Care and cleaning Replacing the lamp: 1. You can find the lamp glass cover at the left side of the cavity. Remove the left shelf rail. 2. Use a narrow, blunt object (for example a teaspoon) to remove the glass cover. Clean the glass cover. 3. If necessary, replace the lamp with applicable 300°C heat-resistant lamp. Use the same lamp type. 4. 5. Install the glass cover. Install the left shelf rail. Door and glass panels To clean the door, remove it.
What to do if… 2. 3. 25 Hold the door trim (B) on the top edge of the door at the two sides and push inwards to release the clip seal. Pull the door trim to the front to remove it. B 4. 5. Hold the door glass panels on their top edge one by one and pull them up out of the guide Clean the door glass panels. To install panels follow the procedure in reverse. Install the smaller panel first, then the larger. WHAT TO DO IF… WARNING! Refer to "Safety information" chapter.
Environment concerns Problem Possible cause Solution The display shows C2 You want to start the pyrolytic cleaning, keep warm or defrost function but you did not remove core temperature sensor plug from the socket. Remove the core temperature sensor plug from the socket. The display shows C3 You want to start pyrolytic cleaning but you did not close the oven door correctly. Close the door correctly.
Packaging material The packaging material is environmentally-friendly and recyclable. Plastic parts are marked with international abbreviations such as PE, PS, etc. Dispose of the packaging material in the containers provided for this purpose at your local waste management facility.
www.aeg.
