BP7304001 EN OVEN USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 7 9 10 12 14 16 17 19 22 25 26 27 29 Safety information Product description Before first use Control panel Daily use Clock functions Automatic programmes Using the accessories Additional functions Care and cleaning What to do if… Environment concerns Installation Guarantee/Customer Service Centres The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your personal safety and the safety of your property • For the respect of the environment • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it. The manufacturer is not responsible if incorrect installation or use results in damage.
Safety information 5 • Before the installation, make sure that the kitchen cabinet has the recess dimensions applicable. • Make sure that the appliance is installed below and adjacent safe structures. • Keep the minimum distances to the other appliances and units. • The appliance cannot be positioned on a base. • Built in ovens and built in cooking surfaces are attached with special connection system. To prevent damage to the appliance, only use an appliance with the appliances from the same manufacturer.
Safety information • Always close the appliance door when you cook, even while grilling. Care and cleaning • Before maintenance, switch off the appliance and disconnect the appliance from the power supply. • Before maintenance, make sure that the appliance is cold. There is the risk of burns. There is the risk that the glass panels can break. • Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a fire.
Product description 7 Oven lamp • The type of light bulb or halogen lamp used for this appliance is only for household appliances. Do not use it for house lighting. • If it becomes necessary to replace the lamp, use one of the same power and specifically designed for household appliances only. • Disconnect the appliance from the power supply before the replacement of the oven lamp. There is the risk of electrical shock. Service centre • Only an approved engineer can repair or work on the appliance.
Product description 1 2 3 4 5 6 7 8 9 10 Control panel Electronic programmer Socket for the core temperature sensor Heating element Oven lamp Fan Rear wall heating element Bottom heat Shelf support, removable Shelf positions Accessories • Wire shelf For cookware, cake tins, roasts. • Baking tray For cakes and biscuits. • Grill / roasting pan To bake and roast or as pan to collect fat.
Before first use 9 • Core Temperature Sensor To measure how far the food is cooked. BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Initial Cleaning • Remove all parts from the appliance. • Clean the appliance before first use. Refer to chapter "Care and Cleaning". First connection to the mains After first connection to the mains all symbols in the display are on for some seconds. For the subsequent few seconds the display shows software version.
Control panel CONTROL PANEL Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the appliance. Sensor Field Function - DISPLAY Shows the current settings of the appliance. 2 ON/OFF To activate and deactivate the appliance. 3 OPTIONS To set an oven function or programme. Straight access to the oven function when the appliance is off. 4 MY FAVOURITE PROGRAMME You can store your favourite programme.
Control panel Display 1 2 7 3 6 5 4 Oven function symbol Temperature/Time display Clock/Residual heat display (also Minute minder and Time of day) Residual heat indicator Indicators for the clock functions (refer to the table "Clock functions") Heat up indicator Number of oven function/programme 1 2 3 4 5 6 7 Other indicators of display Symbols / / Name Description Function You can choose an oven function. Automatic programme You can choose an oven programme.
Daily use DAILY USE WARNING! Refer to "Safety information" chapter. To operate the appliance you can use: • manual mode -to set an oven function, the temperature and the cooking time manually. • automatic programmes -to prepare a dish when you do not have a knowledge or experience in cooking. Setting the oven function 1. 2. 3. Touch . The display shows a preset temperature, symbol and number of the oven function. flashes in the display. or to set an oven function.
Daily use Oven function Application 11 Bottom Heat To bake cakes with a crispy base, and to preserve food. 12 ECO Roasting ECO functions let you to optimize the energy consumption during cooking. Thus it is necessary to set the cooking time first. To get more information about the recommended settings, refer to the cooking tables with the equivalent usual oven function. 13 Pyro Cleaning For automatic pyrolytic cleaning of the oven. The oven temperature is at approximately 932 °F.
Clock functions Energy saving The appliance has some features that help you save energy during everyday cooking: • Residual heat: – the oven function or programme operates: the heating elements are deactivated 10% time earlier (the lamp and fan continue to operate). The condition: the cooking time is longer then 30 minutes or you use the clock functions (Duration, End, Time delay). – the oven is off: you can use the heat to keep the food warm.
Clock functions 2. 3. 4. 5. Touch again and again until the display shows . flashes in the display. or to set minutes for DURAUse TION. to confirm Touch or to set hours for DURATION. Use If you touch or during setting hours for DURATION, the appliance goes to setting of the END function. 6. When the set time ends, an acoustic signal operates for two minutes. symbol and time setting flash in the display. The appliance deactivates.
Automatic programmes function. During these two minutes you can examine the cooking results and, if necessary, add END or DURATION time. Setting the Time delay function DURATION and END can be used at the same time, if the oven is to be switched on and off automatically later. In this case first set DURATION and then END function (refer to "Setting the DURATION" and "Setting the END "). When the Time delay function is activated the display shows static symbol of the oven function, with a dot and .
Using the accessories 2. 3. 4. 5. 17 Touch or to choose the automatic recipes. or the automatic recipe activates automatically after five seconds. Touch When set time ends, an acoustic signal operates for two minutes. Symbol flashes. The appliance deactivates. Touch any sensor field or open the oven door to stop an acoustic signal. Automatic programmes with weight input If you set the weight of the meat, the appliance calculates the roasting time. 1. Touch again and again until the display shows .
Using the accessories • The core temperature: refer to the table for the core temperature sensor in the recipe book. Only use the core temperature sensor supplied or original replacement parts. 1. 2. 3. 4. 5. Activate the appliance. Put the point of the core temperature on the sensor (with the symbol handle) into the centre of the meat. Put the plug of the core temperature sensor into the socket at the front of the appliance. The display shows a flashing symbol and the default set core temperature.
Additional functions 19 When you put the core temperature sensor into the socket, you cancel the settings for the clock functions. When you cook with the core temperature sensor, you can change the temperature shown in the Temperature/Time display. After you put the core temperature sensor in the socket and set an oven function and temperature, the display shows the current core temperature.
Additional functions 1. 2. Set the temperature and time for an oven function or programme. Touch and hold for more than three seconds. An acoustic signal sounds. 3. Deactivate the appliance. Using My Favourite Programme function: • To activate the function touch . The appliance activates your favourite programme. • To deactivate the function touch . The appliance deactivates your favourite programme. When the function operates, you can change the time and temperature.
Additional functions Indicator of the setting menu Description Value to set SET2 RESIDUAL HEAT INDICATOR ON/OFF SET3 CLEANING REMINDER ON/OFF SET4 KEY TONE CLICK/BEEP/OFF SET5 FAULTY TONE ON/OFF SET6 SERVICE MENU --- SET7 RESTORE SETTINGS YES/NO SET81) TIME EXTENSION ON/OFF 21 1) Selected models only You can set the settings menu only when the appliance is off. Activate the Settings menu: 1. If necessary, deactivate the appliance . 2. Touch and hold for three seconds.
Care and cleaning – when the appliance is on; – if you touch any of the sensor fields during night brightness (apart from ON/OFF), the display goes back to day brightness mode for next 10 seconds; – if the appliance is off and you set the minute minder. When the minute minder function ends, the display goes back to night brightness; Cooling fan When the appliance operates, the cooling fan activates automatically to keep the surfaces of the appliance cool.
Care and cleaning 23 You can use the End function to delay start of the cleaning process. During the Pyro cleaning the door is locked. The symbol and the bars of the heat indicator come up, until the door unlocks again. The door unlocks when temperature inside the oven is under safety condition and Pyro cleaning is finished. During pyrolytic cleaning the lamp is off.
Care and cleaning Before you change the oven lamp: • Deactivate the appliance. • Remove the fuses from the fuse box or deactivate the circuit breaker. CAUTION! Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp glass cover and the cavity. Replacing the oven lamp: 1. You can find the lamp glass cover at the cavity ceiling. Turn the lamp glass cover counterclockwise to remove it. 2. Clean the glass cover. 3.
What to do if… 2. 3. 25 Hold the door trim (B) on the top edge of the door at the two sides and push inwards to release the clip seal. Pull the door trim to the front to remove it. B 4. 5. Hold the door glass panels on their top edge one by one and pull them up out of the guide Clean the door glass panels. To install panels follow the procedure in reverse. Install the smaller panel first, then the larger. WHAT TO DO IF… WARNING! Refer to "Safety information" chapter.
Environment concerns Problem Possible cause Solution The display shows C2 You want to start the pyrolytic cleaning, keep warm or defrost function but you did not remove core temperature sensor plug from the socket. Remove the core temperature sensor plug from the socket. The display shows C3 You want to start pyrolytic cleaning but you did not close the oven door correctly. Close the door correctly.
Installation 27 Packaging material The packaging material is environmentally-friendly and recyclable. Plastic parts are marked with international abbreviations such as PE, PS, etc. Dispose of the packaging material in the containers provided for this purpose at your local waste management facility. INSTALLATION WARNING! Refer to "Safety information" chapter. The built-in unit must meet the stability requirements of DIN 68930. min. 3 mm 200 cm2 547 546 114 590 560 min. 20 530 min.
Installation max. R1200 mm 130 140 alternativ 100 H05VV-F H05RR-F min.
Guarantee/Customer Service Centres 29 2x3,5x25 GUARANTEE/CUSTOMER SERVICE CENTRES EURO-LINE APPLIANCES INC. LENGTH OF WARRANTY EURO-LINE WILL PAY FOR: TWO YEAR FULL WARRANTY from original date of purchase, including parts and labour, to the first purchaser of this appliance Replacement parts and/or labour to repair defects in materials or workmanship. Service must be provided by an authorized Euro-Line company (unless advised otherwise). THIS GUARANTEE DOES NOT COVER COMMERCIAL USE.
For Service and Parts Contact: EURO-PARTS, USA EURO-PARTS, CANADA EURO-LINE APPLIANCES Tel: 1-800-561-4614 Fax: 1-519-528-5001 Tel: 1-800-678-8352 Fax: 1-519-528–5001 1-800-421-6332 Tel. Direct: 1-905-829-3980 Fax: 1-905-829-3985 User Instructions & Installation Manual Service & Repair To save you time and money please have the following information ready in case you have to call for service: • Name of the dealer from whom you purchased the appliance.
www.aeg.