User manual

57
Description of the Appliance
• The cooker hood is designed to extract unpleasant odours from
the kitchen, it will not extract steam.
• The hood is supplied as an extractor unit and can also be used with a
recirculation mode by fitting a charcoal filter.
• Only for HI 8610: The cooker hood is supplied ready for use as a
recirculation hood and may be used for extraction by removing the
charcoal filter which has been fitted inside the cooker hood.
Extraction mode
• In this mode fumes are extracted to
the outside via a hose connected to
the coupling ring A. Fig. 1.
• In order to obtain the best performance
the hose should have a diameter equal
to the outlet hole.
For the extractor version this pipe
must have a diameter of 150 mm.
Should there already be a pipe of
diameter 125 mm that ducts to the
outside through the walls or roof, it is
possible to use the 150/125 mm
reduction flange provided. In this case
the hood will be slightly noisier.
Fig. 1
A
Recirculation mode
• The air is filtered through a charcoal filter and returned to the
kitchen.
• You will need an original charcoal filter for the recirculation mode.
(See Special Accessories).