Operation Manual

g
35
5.1 Filling the Coffee Bean
Container
0 Turn the bean container to the "Coffee
Beans" position
(Fig. 10) . The mech-
anism sets to the required function.
0 Set the grinding texture (Fig. 11).
Using the grinding texture adjustment
(Fig. 2, bottom) you can set the grind-
ing texture of the grinder.
1
Note! Before putting beans into the
coffee machine for the first time, you
can set the grinding texture once with
the grinder stationary. Once the
grinder has been filled with beans, the
setting can be changed only while
grinding is proceeding. Otherwise the
coffee machine could be damaged.
3
The grinder is factory-set at a medium
grinding texture. Notes on changing
the grinder setting can be found in
„Setting the Grinding Texture" page 38.
0 Raise the lid of the coffee bean con-
tainer, and fill the container with fresh
coffee beans (Fig. 12). Then reclose the
lid.
1
Note! Make sure that no foreign bod-
ies, such as stones, enter the coffee
bean container. Damage caused by for-
eign bodies in the grinder is excluded
from the guarantee.
5.2 Select Cup Size
Depending on your taste, select a
"short" espresso or a "long" milky cof-
fee.
0 The selection is made by repeatedly
pressing the "Cup Size" key (Fig. 3, d)
until the desired cup symbol is indicated.
The cup sizes are indicated as follows:
Espresso cup
Coffee cup
Coffee mug
The coffee machine is factory-set to
standard measures.
3
Notes on changing the cup measures
can be found in „Changing and Saving
the Cup Measure" on page 37.
5.3 Selecting the Coffee Quantity
0 Repeatedly press the "Coffee Quantity"
key (Fig. 3, c) until the desired coffee
quantity is indicated.
The coffee quantities are indicated as
follows:
"extra mild"
"mild"
"normal"
"strong"
"extra strong"
3
To save having to select the coffee
quantity every time you switch on the
coffee machine, you can save the cof-
fee quantity in relation to the cup size.
Notes on how to do this can be found
in „Changing and Saving the Coffee
Quantity" on page 38.
5.4 Dispensing Coffee
0 Place one or two cups under the coffee
dispenser. The dispenser can be slid up
or down to match the height of your
cup/mug to reduce heat loss and cof-
fee splashes (Fig. 13).
3
If the height adjuster is stiff, proceed
as described under „Cleaning the
height adjustment“ page 40.
0 Press the Key for 1 cup of coffee (Fig.
3, b) or the Key for 2 cups of cof-
fee (Fig. 3, a) . When you dispense
2 cups of coffee, the previously set
"Coffee Quantity" is doubled and the
"Cup Measure" is adjusted accordingly.
The coffee is now made.
3
In the coffee-making process, the
ground coffee is first of all wetted with
a small quantity of water for pre-
brewing. Following a short pause, the
actual brewing process commences.
0 You can stop coffee being dispensed by
briefly pressing the coffee dispensing
key.
822_949_318 CP2..._defnep.book Seite 35 Freitag, 2. November 2007 6:30 18