Operation Manual

g
39
The factory setting is "normal“. You can
change this setting as follows:
0 Switch the appliance on and wait until
it is in the base position.
0 Simultaneously press and hold the Key
for 1 cup of coffee (Fig. 3, b) and the
"Steam Pre-selector" key (Fig. 3, g) .
0 While still holding these keys, press the
"On/Off" key (Fig. 3, h) .
0 Keep all three keys pressed for around
1 second, until the "Coffee machine
heating" indicator (Fig. 3, i) and one
of the coffee temperature indicators
are illuminated.
0 Now release all three keys.
0 Use the "Coffee Quantity" key (Fig. 3, c)
(increase temp.) or the "Cup Size"
key (Fig. 3, d) (reduce temp.) to
select the temperature level you
require.
0 When you have selected the tempera-
ture, press the "Clean" key (Fig. 3, f)
to save and exit the "Set Coffee Tem-
perature" mode.
13 Setting the Switch-off
Time
If the coffee machine is not used for a
set amount of time, it automatically
switches off for economy reasons.
You can choose between five switch-
off times (automatic switch-off after 1
to 5 hours).
In the "Set Switch-off Time" mode, the
coffee quantity indicator is illumi-
nated, which now acts as the switch-
off time indicator.
The switch-off times are indicated as
follows:
1 hour
2 hours
3 hours
4 hours
5 hours
The switch-off time has been factory-
set to 3 hours. You can change this set-
ting as follows:
0 Switch the appliance on and wait until
it is in the base position.
0 Simultaneously press and hold the Key
for 2 cups of coffee (Fig. 3, a) and
the "On/Off" key (Fig. 3, h) . Keep
both keys pressed for around 1 second,
until the "On/Off" key (Fig. 3, h)
indicator and one of the switch-off
time indicators are illuminated.
0 Now release both keys.
0 Use the "Coffee Quantity" key (Fig. 3, c)
(increase time) or the "Cup Size"
key (Fig. 3, d) (reduce time) to
select the switch-off time you require.
0 When you have selected the switch-off
time, press the"Clean" key (Fig. 3, f)
to save the setting and exit the "Set
Switch-off Time" mode.
14 Resetting the Coffee
Machine
This function is used to reset any
changes you have made to the factory
settings.
The following settings are affected:
• Cup measures
• Coffee quantities
• Coffee temperatures
•Water hardness
0 Switch the appliance on and wait until
it is in the base position.
0 Simultaneously press and hold the
"Descale" key (Fig. 3, e) and the "Clean"
key (Fig. 3, f). Keep both keys pressed
for around 3 seconds, until the coffee
machine switches off for a short time,
and then switches back on with the
factory settings. The coffee machine is
now reset.
822_949_318 CP2..._defnep.book Seite 39 Freitag, 2. November 2007 6:30 18