EE7004011 EN OVEN USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 7 9 9 12 14 16 18 20 22 26 27 Safety information Product description Before first use Control panel Daily use Clock functions Automatic programmes Using the accessories Additional functions Care and cleaning What to do if… Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your personal safety and the safety of your property • For the respect of the environment • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it. The manufacturer is not responsible if incorrect installation or use results in damage.
Safety information 5 • You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. • Before the installation, make sure that the kitchen cabinet has the recess dimensions applicable. • Make sure that the appliance is installed below and adjacent safe structures. • Keep the minimum distances to the other appliances and units. • The appliance cannot be positioned on a base.
Safety information • Do not apply pressure on the open door. • Always close the appliance door when you cook, even while grilling. Care and cleaning • Before maintenance, switch off the appliance and disconnect the appliance from the power supply. • Before maintenance, make sure that the appliance is cold. There is the risk of burns. There is the risk that the glass panels can break. • Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a fire.
Product description 7 • Use only original spare parts. Disposal of the appliance • To prevent the risk of physical injury or damage – Disconnect the appliance from the power supply. – Cut off the mains cable and discard it. – Discard the door catch. This prevents children or small animals from being closed inside of the appliance. There is the risk of suffocation.
Product description 11 Shelf support, removable 12 Shelf positions Oven accessories • Wire shelf For cookware, cake tins, roasts. • Baking tray For cakes and biscuits. • Combi pan For cake and biscuits. To bake and roast or as pan to collect fat. • Core Temperature Sensor To measure how far the food is cooked.
Before first use 9 BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Initial Cleaning • Remove all parts from the appliance. • Clean the appliance before first use. Refer to chapter "Care and Cleaning". First connection to the mains After first connection to the mains all symbols in the display are on for some seconds. For the subsequent few seconds the display shows software version. First setting the time of day After the software version goes off, the display shows "h" and "12:00".
Control panel Sensor Field Function - DISPLAY Shows the current settings of the appliance. 2 ON/OFF To activate and deactivate the appliance. 3 OPTIONS To set an oven function or programme. Straight access to the oven function when the appliance is off. 4 MY FAVOURITE PROGRAMME You can store your favourite programme. Use it to access your favourite programme directly, also when the appliance is off.
Control panel 3 4 5 6 7 11 Clock/Residual heat display (also Minute minder and Time of day) Residual heat indicator Indicators for the clock functions (refer to the table "Clock functions") Heat up indicator Number of oven function/programme Other indicators of display Symbols Name / / Description Options You can choose an oven function. Automatic programme You can choose an oven programme. My favourite programme The favourite programme operates.
Daily use Operating the hob: 1. Turn the temperature control knob to set the temperature. 2. To end the cooking process, turn the control knob to the off position. Automatic heat-up function This information is applicable only if you install the hob with Automatic heat up function! The automatic heat-up function heats the cooking zone with full power for some time. Activating heat-up function: 1.
Daily use Oven function 13 Application 4 Conventional Cooking To bake and roast food on one shelf position. 5 Frozen Foods To make your convenience food like e.g. French Fries, Wedges, spring rolls crispy. 6 Turbo Grilling To roast larger meat joints or poultry with bones on one shelf position. Also to brown food, for example gratin. 7 Fast Grilling 8 Grilling 9 Keep Warm 10 Defrost 11 Bottom Heat To bake cakes with a crispy base, and for the food preservation.
Clock functions Activating the fast heat up function : Touch and hold for more then three seconds. If you activate the fast heat up function, the bars on the display flash one by one to show that the function operates. The fast heat up is not available with every oven function. An acoustic signal operates if the fast heat up is not available for set function.
Clock functions 15 You can not use Count Up Timer when Duration or End is set. Setting the DURATION 1. Activate the appliance and set an oven function and temperature. 2. Touch again and again until the display shows . flashes in the display. or to set minutes for DURA3. Use TION. to confirm 4. Touch or to set hours for DURATION. 5. Use If you touch or during setting hours for DURATION, the appliance goes to setting of the END function. 6.
Automatic programmes You can use SET+GO function only if DURATION is set. Check result (selected models only) If you set END or DURATION function, 2 minutes before end of cooking an acoustic signal sounds and lamp activates. The appliance goes to the setting of the END or DURATION function. During these two minutes you can examine the cooking results and, if necessary, add END or DURATION time.
Automatic programmes 17 Automatic recipes Setting an automatic recipe: 1. Touch two times until the display shows . The display shows symbol and number of the automatic programme. or to choose the automatic recipes. 2. Touch or the automatic recipe activates automatically after five seconds. 3. Touch 4. When set time ends, an acoustic signal operates for two minutes. Symbol flashes. The appliance deactivates. 5. Touch any sensor field or open the oven door to stop an acoustic signal.
Using the accessories An acoustic signal sounds. 3. Deactivate the appliance. Using the my favourite programme function: • Activating the my favourite programme function: Touch . The appliance activates your favourite programme. • Deactivating the my favourite programme function: Touch . When the my favourite programme function operates, you can change the time and temperature. USING THE ACCESSORIES WARNING! Refer to "Safety information" chapter.
Using the accessories 19 You can set the core temperature only when the symbol flashes. If the display shows before you set the core temperature, use and or to set a a static symbol new value. 6. Set the oven function and, if necessary, the oven temperature. The display shows the current core temperature and (which shows the relation between the set oven temperature and the current oven temperature). The core temperature sensor must stay in the meat and in the socket during the cooking.
Additional functions Installing the Oven Accessories The deep pan and the wire shelf have side edges. These edges and the shape of the guide-bars causes the anti-tilt safety for the oven accessories. Installing the wire shelf and the deep pan together Put the wire shelf on the deep pan. Push the deep pan between the guide-bars of one of the oven levels. ADDITIONAL FUNCTIONS Child safety You cannot activate the appliance on if the child safety device operates.
Additional functions 21 2. Do the necessary settings. at the same time. 3. Touch and hold and Loc goes on in the display. The Control Lock is on. If you touch any of the sensor fields when the Control Lock, an acoustic signal operates. at the same time. To deactivate the Control Lock, touch and hold and The Control Lock does not prevent you accidentally deactivate the appliance. If you deactivate the appliance, the Control Lock is off.
Care and cleaning Oven temperature Switch-off time 30 °C -120 °C 12.5 h. 120 °C - 200 °C 8.5 h. 200 °C -250 °C 5.5 h. 250 °C -maximum °C 3.0 h. After an automatic switch-off, touch a sensor field to operate the appliance again. The Automatic switch-off works with all oven functions, apart from Light, Low temperature cooking, core temperature sensor, Duration, End, Time delay.
Care and cleaning 23 Shelf support You can remove the shelf support to clean the side walls. Removing the shelf support 1. Pull the front of the shelf support away from the side wall. 2. Pull the shelf support from the back of the side wall to remove it. To install the shelf support follow the procedure in reverse.
Care and cleaning Install the heating element correctly on the two sides above the support on the inner wall of the appliance. 2. Install shelf support. Oven lamp WARNING! There is a risk of electrical shock. Oven lamp and the lamp glass cover can be hot. Before you change the oven lamp: • Deactivate the appliance. • Remove the fuses from the fuse box or deactivate the circuit breaker. CAUTION! Put a cloth on the bottom of the interior of the appliance.
Care and cleaning CAUTION! Be careful when you remove the door from the appliance. The door is heavy! Removing the oven door 1. Open the oven door as far as it goes. 2. Fully press clamping levers (A) on the two door hinges. 3. Close the oven door until the first position (angle approximately 70°). 4. Hold of the oven door with one hand on each side and pull it away from the oven at an up angle. A A To install the door follow the procedure in reverse.
What to do if… WHAT TO DO IF… Problem Possible cause Solution The cooking zones do not operate Consult the operating instructions for the built-in cooking surface The appliance does not heat up The appliance is deactivated Activate the appliance The appliance does not heat up The time of day is not set Set the clock.
Environment concerns 27 ENVIRONMENT CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
www.aeg-electrolux.