EE7004011 EN OVEN USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 7 9 9 12 14 16 17 19 22 25 26 Safety information Product description Before first use Control panel Daily use Clock functions Automatic programmes Using the accessories Additional functions Care and cleaning What to do if… Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your personal safety and the safety of your property • For the respect of the environment • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it. The manufacturer is not responsible if incorrect installation or use results in damage.
Safety information 5 • Before the installation, make sure that the kitchen cabinet has the recess dimensions applicable. • Make sure that the appliance is installed below and adjacent safe structures. • Keep the minimum distances to the other appliances and units. • The appliance cannot be positioned on a base. • Built in ovens and built in cooking surfaces are attached with special connection system. To prevent damage to the appliance, only use an appliance with the appliances from the same manufacturer.
Safety information • Always close the appliance door when you cook, even while grilling. Care and cleaning • Before maintenance, switch off the appliance and disconnect the appliance from the power supply. • Before maintenance, make sure that the appliance is cold. There is the risk of burns. There is the risk that the glass panels can break. • Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a fire.
Product description 7 Disposal of the appliance • To prevent the risk of physical injury or damage – Disconnect the appliance from the power supply. – Cut off the mains cable and discard it. – Discard the door catch. This prevents children or small animals from being closed inside of the appliance. There is the risk of suffocation.
Product description 11 Shelf support, removable 12 Shelf positions Accessories • Wire shelf For cookware, cake tins, roasts. • Baking tray For cakes and biscuits. • Combi pan For cake and biscuits. To bake and roast or as pan to collect fat. • Core Temperature Sensor To measure how far the food is cooked.
Before first use 9 BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Initial Cleaning • Remove all parts from the appliance. • Clean the appliance before first use. Refer to chapter "Care and Cleaning". First connection to the mains After first connection to the mains all symbols in the display are on for some seconds. For the subsequent few seconds the display shows software version. First setting the time of day After the software version goes off, the display shows "h" and "12:00".
Control panel Sensor Field Function Description 2 ON/OFF To activate and deactivate the appliance. 3 OPTIONS To set an oven function or programme. Straight access to the oven function when the appliance is off. 4 MY FAVOURITE PROGRAMME You can store your favourite programme. Use it to access your favourite programme directly, also when the appliance is off. 5 TEMPERATURE / FAST HEAT UP To set and examine cavity temperature or core temperature sensor temperature.
Control panel 11 Residual heat indicator Indicators for the clock functions (refer to the table "Clock functions") Heat up indicator Number of oven function/programme 4 5 6 7 Other indicators of display Symbols Name / / Description Options You can choose an oven function. Automatic programme You can choose an oven programme. My favourite programme The favourite programme operates. kgr/gr An oven programme with weight input operates. h/min A clock function operates.
Daily use 2. To end the cooking process, turn the control knob to the off position. Automatic heat-up function This information is applicable only if you install the hob with Automatic heat up function! The automatic heat-up function heats the cooking zone with full power for some time. Activating heat-up function: 1. To activate the function turn the control knob clockwise as far as possible (beyond the highest heat setting). 2.
Daily use Oven function Application 5 Frozen Foods To make your convenience food like e.g. French Fries, Wedges, spring rolls crispy. 6 Turbo Grilling To roast larger meat joints or poultry with bones on one shelf position. Also to brown food, for example gratin. 7 Fast Grilling 8 Grilling 9 Keep Warm 10 Defrost 11 Bottom Heat To bake cakes with a crispy base, and for the food preservation. 12 ECO Roasting ECO functions let you to optimize the energy consumption during cooking.
Clock functions The fast heat up is not available with every oven function. An acoustic signal operates if the fast heat up is not available for set function. Energy saving The appliance has some features that help you save energy during everyday cooking: • Residual heat: – When a clock function (Duration, End, Time delay) operates, the heating elements are deactivated after 90% of the set time. The lamp and fan continue to operate.
Clock functions 2. 3. 4. 5. Touch again and again until the display shows . flashes in the display. or to set minutes for DURAUse TION. to confirm Touch or to set hours for DURATION. Use If you touch or during setting hours for DURATION, the appliance goes to setting of the END function. 6. When the set time ends, an acoustic signal operates for two minutes. symbol and time setting flash in the display. The appliance deactivates.
Automatic programmes function. During these two minutes you can examine the cooking results and, if necessary, add END or DURATION time. Setting the Time delay function DURATION and END can be used at the same time, if the oven is to be switched on and off automatically later. In this case first set DURATION and then END function (refer to "Setting the DURATION" and "Setting the END "). When the Time delay function is activated the display shows static symbol of the oven function, with a dot and .
Using the accessories 2. 3. 4. 5. 17 Touch or to choose the automatic recipes. or the automatic recipe activates automatically after five seconds. Touch When set time ends, an acoustic signal operates for two minutes. Symbol flashes. The appliance deactivates. Touch any sensor field or open the oven door to stop an acoustic signal. Automatic programmes with weight input If you set the weight of the meat, the appliance calculates the roasting time. 1. Touch again and again until the display shows .
Using the accessories • The core temperature: refer to the table for the core temperature sensor in the recipe book. Only use the core temperature sensor supplied or original replacement parts. 1. 2. 3. 4. 5. Activate the appliance. Put the point of the core temperature on the sensor (with the symbol handle) into the centre of the meat. Put the plug of the core temperature sensor into the socket at the front of the appliance. The display shows a flashing symbol and the default set core temperature.
Additional functions 19 When you put the core temperature sensor into the socket, you cancel the settings for the clock functions. When you cook with the core temperature sensor, you can change the temperature shown in the Temperature/Time display. After you put the core temperature sensor in the socket and set an oven function and temperature, the display shows the current core temperature.
Additional functions 1. 2. Set the temperature and time for an oven function or programme. Touch and hold for more than three seconds. An acoustic signal sounds. 3. Deactivate the appliance. Using My Favourite Programme function: • To activate the function touch . The appliance activates your favourite programme. • To deactivate the function touch . The appliance deactivates your favourite programme. When the function operates, you can change the time and temperature.
Additional functions Indicator of the setting menu Description Value to set SET2 RESIDUAL HEAT INDICATOR ON/OFF SET3 KEY TONE CLIC/BEEP/OFF SET4 FAULTY TONE ON/OFF SET5 SERVICE MENU ON/OFF SET6 RESTORE SETTINGS YES/NO SET71) TIME EXTENSION ON/OFF 21 1) Selected models only You can set the settings menu only when the appliance is off. Activate the Settings menu: 1. If necessary, deactivate the appliance . 2. Touch and hold for three seconds. The display shows "SET1" and "1" flashes.
Care and cleaning – if you touch any of the sensor fields during night brightness (apart from ON/OFF), the display goes back to day brightness mode for next 10 seconds; – if the appliance is off and you set the minute minder. When the minute minder function ends, the display goes back to night brightness; Cooling fan When the appliance operates, the cooling fan activates automatically to keep the surfaces of the appliance cool.
Care and cleaning 2. 23 Pull the shelf support from the back of the side wall to remove it. To install the shelf support follow the procedure in reverse. Valid with telescopic runners: The retaining pins on the telescopic shelf runners must point to the front! 2 1 Ceiling You can fold down the heating element on the ceiling to clean the ceiling easily. WARNING! Before you fold down the heating element deactivate the appliance. Make sure that the appliance is cold.
Care and cleaning Replacing the oven lamp: 1. You can find the lamp glass cover at the cavity ceiling. Turn the lamp glass cover counterclockwise to remove it. 2. Clean the glass cover. 3. If necessary, replace the oven lamp with applicable 300°C heat-resistant oven lamp. Use the same oven lamp type. 4. Install the glass cover. Replacing the lamp: 1. You can find the lamp glass cover at the left side of the cavity. Remove the left shelf rail. 2.
What to do if… 25 The number of glass panels if different for the different models. CAUTION! Put the door with the outer side down on a soft and level surface to prevent scratches. Removing and cleaning the door glass panels 1. Remove the door. 2. Hold the door trim (B) on the top edge of the door at the two sides and push inwards to release the clip seal. 3. Pull the door trim to the front to remove it. B 4. 5.
Environment concerns Problem Possible cause Solution The oven lamp does not operate The oven lamp is defective Replace the oven lamp.
www.aeg.
