EE7304151 DE BACKOFEN BENUTZERINFORMATION
FÜR PERFEKTE ERGEBNISSE Danke, dass Sie sich für dieses AEG Produkt entschieden haben. Wir haben es geschaffen, damit Sie viele Jahre von seiner ausgezeichneten Leistung und den innovativen Technologien, die Ihnen das Leben erleichtern, profitieren können. Es ist mit Funktionen ausgestattet, die in gewöhnlichen Geräten nicht vorhanden sind. Nehmen Sie sich ein paar Minuten Zeit zum Lesen, um seine Vorzüge kennen zu lernen.
Inhalt INHALT 4 8 9 10 13 15 18 19 21 24 28 29 Sicherheitshinweise Gerätebeschreibung Vor der ersten Inbetriebnahme Bedienfeld Täglicher Gebrauch Uhrfunktionen Automatikprogramme Verwendung des Zubehörs Zusatzfunktionen Reinigung und Pflege Was tun, wenn … Umwelttipps In dieser Benutzerinformation werden folgende Symbole verwendet: Wichtige Hinweise zur Sicherheit von Personen und Informationen zur Vermeidung von Geräteschäden Allgemeine Hinweise und Ratschläge Hinweise zum Umweltschutz Änderungen vorbeh
Sicherheitshinweise SICHERHEITSHINWEISE Lesen Sie vor der Installation und Anwendung sorgfältig dieses Handbuch: • Für Ihre persönliche Sicherheit und die Sicherheit Ihres Eigentums. • Im Interesse der Umwelt. • Zur korrekten Bedienung des Geräts. Bewahren Sie diese Bedienungsanleitung in der Nähe des Geräts auf, auch wenn Sie dieses anderswo aufstellen oder verkaufen. Der Hersteller ist nicht dafür verantwortlich, wenn eine inkorrekte Installation und Verwendung Schäden verursacht.
Sicherheitshinweise 5 • Die elektrische Installation muss eine Trenneinrichtung aufweisen, mit der Sie das Gerät allpolig von der Stromversorgung trennen können. Die Trenneinrichtung muss mit einer Kontaktöffnungsbreite von mindestens 3 mm ausgeführt sein. • Geeignete Trenneinrichtungen sind: Überlastschalter, Sicherungen (Schraubsicherungen müssen aus dem Halter entfernt werden können), Fehlerstromschutzschalter und Schütze. • Die Einbaumöbel bzw.
Sicherheitshinweise • Um eine Beschädigung oder die Verfärbung der Emailbeschichtung zu vermeiden: – Stellen Sie keine Gegenstände direkt auf den Backofenboden und bedecken Sie diesen nicht mit Alu-Folie. – Stellen Sie kein Wasser in das heiße Gerät. – Lassen Sie nach dem Abschalten des Geräts kein feuchtes Geschirr oder feuchte Speisen im Gerät stehen.
Sicherheitshinweise 7 • Keine entflammbaren Produkte oder Gegenstände, die mit entflammbaren Produkten benetzt sind, und/oder schmelzbare Gegenstände (aus Kunststoff oder Aluminium) in das Gerät, in die Nähe des Gerätes oder auf das Gerät stellen. Backofenlampe • Die Leuchtmittel in diesem Gerät sind nur für Haushaltsgeräte geeignet. Benutzen Sie sie nicht zur Raumbeleuchtung.
Gerätebeschreibung GERÄTEBESCHREIBUNG Gesamtansicht 2 3 2 1 4 5 6 7 5 4 12 3 8 2 1 9 10 11 1 2 3 4 5 6 7 8 9 10 11 12 Bedienleiste Kochzonenanzeigen Elektronischer Programmspeicher Kochzonen-Schalter Buchse für den Kerntemperatursensor Heizelement Backofenlampe Gebläse Rückwandheizelement Unterhitze Einhängegitter, abnehmbar Einschubebenen
Vor der ersten Inbetriebnahme Zubehör • Kombirost Für Kochgeschirr, Kuchenformen, Braten. • Backblech Für Kuchen und Plätzchen. • Universalblech Für Kuchen und Plätzchen. Zum Backen und Braten oder zum Auffangen von abtropfendem Fett. • Kerntemperatursensor Zum Messen des Garzustands des Gerichts. VOR DER ERSTEN INBETRIEBNAHME WARNUNG! Siehe Kapitel „Sicherheitshinweise“.
Bedienfeld Erste Reinigung • Entfernen Sie alle Teile aus dem Gerät. • Reinigen Sie das Gerät vor der ersten Inbetriebnahme. Siehe Kapitel „Reinigung und Pflege“. Erster Anschluss an das Stromnetz Nach dem ersten Anschluss an das Stromnetz leuchten alle Symbole im Display einige Sekunden lang. In den darauf folgenden Sekunden zeigt das Display die Softwareversion an. Erstes Einstellen der Uhrzeit Nachdem die Anzeige der Softwareversion erloschen ist, zeigt das Display „h“ und „12:00“ an.
Bedienfeld Sensorfeld Funktion Beschreibung 3 OPTIONEN Einstellen einer Backofenfunktion oder eines Programms. Wenn das Gerät ausgeschaltet ist, lässt sich die Backofenfunktion direkt auswählen. 4 BEVORZUGTES PROGRAMM 5 TEMPERATUR / SCHNELLAUFHEIZUNG Einstellen und Überprüfen der Temperatur des Backofeninnenraums oder des Kerntemperatursensors. Halten Sie die Taste drei Sekunden lang gedrückt, um die Schnellaufheizfunktion einoder auszuschalten.
Bedienfeld Restwärmeanzeige Anzeigen der Uhrfunktionen (siehe Tabelle „Uhrfunktionen“) Aufheiz-Anzeige Nummer der Backofenfunktion/des Programms 4 5 6 7 Weitere Displayanzeigen Symbole Bezeichnung / / Beschreibung Optionen Auswahl einer Backofenfunktion. Automatikprogramme Auswahl eines Backofenprogramms. Bevorzugtes Programm Aktivierung des bevorzugten Programms. kg/g Ein Backofenprogramm mit Gewichtseingabe ist aktiv. Std./Min. Es ist eine Uhrfunktion aktiviert.
Täglicher Gebrauch 13 Gebrauch des Kochfelds: 1. Drehen Sie den Temperaturwahlknopf, um die Temperatur einzustellen. 2. Zum Beenden des Kochvorgangs muss der Schalter in die Position AUS gedreht werden. Die Ankochautomatik Diese Angaben gelten nur, wenn das Kochfeld mit einer Ankochautomatik ausgestattet ist! Mit der Ankochautomatik wird die Kochzone eine Zeit lang mit voller Leistung aufgeheizt. Einschalten der Ankochautomatik: 1.
Täglicher Gebrauch Backofenfunktion Anwendung 2 Pizzastufe Zum Backen auf einer Ebene für Gerichte, die eine intensivere Bräunung und Knusprigkeit des Bodens benötigen. Die Backofentemperatur gegenüber Ober-/Unterhitze um 20 - 40 °C niedriger einstellen. 3 Bio-Garen Zum Braten von sehr magerem und zartem Gargut. 4 Ober-/ Unterhitze Zum Backen und Braten auf einer Ebene. 5 Tiefkühlgerichte Damit Tiefkühlprodukte wie Pommes Frites, Kroketten und Frühlingsrollen schön knusprig werden.
Uhrfunktionen 2. 15 Berühren Sie , um zur Anzeige der eingestellten Temperatur zurückzukehren, oder warten Sie fünf Sekunden, bis diese automatisch angezeigt wird. Schnellaufheizfunktion Die Funktion Schnellaufheizung verkürzt die Aufheizzeit. Geben Sie kein Gargut in den Backofen, wenn die Funktion Schnellaufheizung aktiviert ist. länger als drei Sekunden.
Uhrfunktionen SYMBOL FUNKTION BESCHREIBUNG ENDE Einstellen der Abschaltzeit für den Backofen. Sie können die Funktionen Dauer und Ende gleichzeitig (zur Zeitverzögerung) benutzen, wenn das Gerät später automatisch ein- und ausgeschaltet werden soll. SET+GO Zum späteren Einschalten des Geräts mit den voreingestellten Funktionen durch die Berührung eines Sensorfelds. Garzeitmesser Verwenden Sie den Garzeitmesser, um festzustellen, wie lange das Gerät bereits in Betrieb ist.
Uhrfunktionen 5. 6. 17 Das Symbol und die Zeiteinstellung blinken im Display. Das Gerät wird ausgeschaltet. Schalten Sie den Signalton durch die Berührung eines Sensorfeldes oder das Öffnen der Backofentür aus. Schalten Sie das Gerät aus. Einstellen der Funktion SET+GO Zum späteren Einschalten des Geräts mit den voreingestellten Funktionen durch die Berührung eines Sensorfelds. 1.
Automatikprogramme 2. 3. 4. 5. Stellen Sie den KURZZEIT-WECKER mit oder ein. Stellen Sie zuerst die Sekunden, dann die Minuten und Stunden ein. , oder warten Sie fünf Berühren Sie Sekunden, bis sich der KURZZEIT-WECKER automatisch einschaltet. Nach Ablauf der eingestellten Zeit ertönt zwei Minuten lang ein Signalton und „00:00“ sowie blinken im Display. Schalten Sie den Signalton durch die Berührung eines Sensorfeldes oder das Öffnen der Backofentür aus.
Verwendung des Zubehörs 3. 4. 5. 6. 19 Im Display erscheinen: die Gardauer, das Symbol Dauer , ein Standardgewicht und die Gewichtseinheit (kg, g). , oder warten Sie fünf Sekunden, bis die Einstellungen automatisch Berühren Sie gespeichert werden. Das Gerät startet. Das Symbol der Gewichtseinheit blinkt im Display. Während dieser oder ändern. Berühren Sie . Zeit können Sie das Standardgewicht mit Nach Ablauf der Zeit ertönt zwei Minuten lang ein Signalton. blinkt. Das Gerät wird ausgeschaltet.
Verwendung des Zubehörs 1. 2. 3. 4. 5. Schalten Sie das Gerät ein. Stecken Sie die Spitze des Kerntemperaauf tursensors (mit dem Symbol dem Griff) in die Mitte des Garguts. Stecken Sie den Stecker des Kerntemperatursensors in die Buchse an der Vorderseite des Geräts. Im Display wird ein blinkendes Symbol und die voreingestellte Kerntemperatur angezeigt. Die Temperatur beträgt 60 °C beim ersten Gebrauch und die jeweils zuletzt eingestellte Temperatur bei darauf folgenden Einsätzen.
Zusatzfunktionen 21 Wenn Sie mit dem Kerntemperatursensor garen, können Sie die im Temperatur-/Dauer-Display angezeigte Temperatur ändern. Wenn Sie den Kerntemperatursensor in die Buchse eingesteckt und eine Backofenfunktion und eine Temperatur eingestellt haben, wird im Display die aktuelle Kerntemperatur angezeigt. Berühren Sie wiederholt, um die anderen drei Temperaturen anzuzeigen: • Die aktuelle Kerntemperatur • Die eingestellte Backofentemperatur • Die aktuelle Backofentemperatur.
Zusatzfunktionen 1. Stellen Sie die Temperatur und die Dauer für eine Backofenfunktion oder ein Programm ein. 2. Berühren Sie länger als drei Sekunden. Ein akustisches Signal ertönt. 3. Schalten Sie das Gerät aus. Verwenden der Funktion „Meine Programme“: • Berühren Sie , um diese Funktion einzuschalten. Das Gerät schaltet Ihr Programm ein. • Berühren Sie , um diese Funktion auszuschalten. Das Gerät schaltet Ihr Programm aus. Sie können die Dauer und die Temperatur bei eingeschalteter Funktion ändern.
Zusatzfunktionen 23 Einstellmenü Anzeige der Einstellung Beschreibung Einstellmöglichkeit SET1 SET+GO ON/OFF SET2 RESTWÄRMEANZEIGE ON/OFF SET3 TASTENTÖNE CLIC/BEEP/OFF SET4 ALARMSIGNALE ON/OFF SET5 MENÜ SERVICE ON/OFF SET6 ZURÜCKSETZEN YES/NO SET71) ZEITVERLÄNGERUNG ON/OFF 1) Nur ausgewählte Modelle Das Menü Einstellungen lässt sich nur bei ausgeschaltetem Gerät aufrufen. Aktivieren des Menüs Einstellungen: 1. Schalten Sie das Gerät aus, sofern notwendig . 2.
Reinigung und Pflege Helligkeit des Displays Die Helligkeit des Displays ändert sich in zwei Stufen: • Nachthelligkeit - Ist das Gerät ausgeschaltet, verringert sich die Helligkeit des Displays zwischen 22:00 and 06:00 Uhr.
Reinigung und Pflege 25 Einhängegitter abnehmen 1. Ziehen Sie das Einhängegitter vorne von der Seitenwand weg. 2. Ziehen Sie das Einhängegitter hinten von der Seitenwand weg, um dieses zu entfernen. Führen Sie zum Anbringen der Einhängegitter die obigen Schritte in umgekehrter Reihenfolge durch. Gilt für Auszüge: Die Haltestifte der Auszüge müssen nach vorne zeigen! 2 1 Backofendecke Sie können das Heizelement an der Decke herunterklappen, damit Sie die Backofendecke leichter reinigen können.
Reinigung und Pflege Das Heizelement muss auf beiden Seiten über der Halterung an der Innenwand des Geräts eingerastet sein. 2. Setzen Sie die Einhängegitter wieder ein. Backofenlampe WARNUNG! Es besteht die Gefahr eines elektrischen Schlags. Die Backofenlampe und Glasabdeckung der Lampe können sehr heiß sein. Bevor Sie die Backofenlampe austauschen: • Schalten Sie das Gerät aus. • Entfernen Sie die Sicherungen aus dem Sicherungskasten, oder schalten Sie den Schutzschalter aus.
Reinigung und Pflege Tür und Glasscheiben Hängen Sie die Tür aus, um sie zu reinigen. VORSICHT! Gehen Sie beim Aushängen der Tür vorsichtig vor. Die Tür ist schwer! Tür ausbauen 1. Öffnen Sie die Tür so weit wie möglich. 2. Drücken Sie die Klemmhebel (A) an beiden Türscharnieren. 3. Schließen Sie die Tür bis zur ersten Raststellung (Winkel ca. 70°). 4. Fassen Sie die Tür mit beiden Händen seitlich an und ziehen Sie sie schräg nach oben vom Gerät weg.
Was tun, wenn … Führen Sie zum Einsetzen der Türgläser die obigen Schritte in umgekehrter Reihenfolge durch. Setzen Sie zuerst die kleinere Scheibe ein und dann die größere. WAS TUN, WENN … WARNUNG! Siehe Kapitel „Sicherheitshinweise“. Problem Mögliche Ursache Abhilfe Die Kochzonen funktionieren nicht. Sehen Sie in der Gebrauchsanweisung zum Kochfeld nach. Das Gerät heizt nicht. Das Gerät ist ausgeschaltet. Schalten Sie das Gerät ein. Das Gerät heizt nicht. Die Uhrzeit ist nicht eingestellt.
Umwelttipps 29 Wenn Sie das Problem nicht selbst lösen können, wenden Sie sich an Ihren Fachhändler oder Kundendienst. Die vom Kundendienst benötigten Daten finden Sie auf dem Typenschild. Das Typenschild befindet sich am Frontrahmen des Garraums. Wir empfehlen, dass Sie folgende Daten hier notieren: Modell (MOD.) Produktnummer (PNC) Seriennummer (S.N.) ......................................... ......................................... .........................................
www.aeg.