EH B Notice d’utilisation Four électrique encastrable
Sommaire Nous vous remercions d’avoir choisi l’un de nos produits de qualité. Afin de garantir une performance optimale et constante de votre appareil, veuillez lire attentivement cette notice d'utilisation. Il vous permettra d’utiliser correctement et efficacement toutes les fonctions de l’appareil. Nous vous recommandons de conserver cette notice à proximité pour une utilisation rapide et optimale.
Notice d'utilisation 3 Notice d'utilisation 1 Avertissements importants Sécurité de l’installation électrique • Le branchement de l’appareil est du ressort exclusif d’un technicien qualifié. • En cas de dysfonctionnements ou de dommages sur l’appareil : retirez les fusibles ou mettez l’appareil hors tension • Les réparations de l’appareil sont du ressort d'un service après vente. Les réparations inadéquates peuvent occasionner de graves dangers.
Description de l'appareil • Les jus de fruits qui s’égouttent des plaques à pâtisserie laissent des taches qui sont ensuite indélébiles. Pour faire cuire des gâteaux très juteux, utilisez une plaque à fond creux. • Sur la porte ouverte du four, ne posez pas de charge lourde et assurez-vous qu'un enfant ne puisse ni monter, ni s'asseoir. • Ne versez jamais d’eau dans le four lorsqu’il est brûlant. Cela pourrait endommager l’émail et provoquer des décolorations.
Description de l'appareil 5 Bandeau de commandes Voyant de fonctionnement Fonctions du four Voyant de température Sélecteur de température Commande plaques de cuisson Commande plaques de cuisson Equipement du four Voûte et élément chauffant du gril Eclairage du four Niveaux de gradin Filtre à graisse Élément chauffant arrière Ventilateur Sole Gradin fil, amovible
Avant la première utilisation Sortie de vapeur du four La vapeur sortant du four est guidée directement vers le haut via la sortie située à l'arrière de la table de cuisson. Accessoires du four Grille Elle permet de poser des plats (rôtis, gratins), les moules à pâtisserie, etc. Plateau multi-usages Pour gâteau, biscuits, pizza Avant la première utilisation Premier nettoyage Avant d'utiliser le four pour la première fois, vous devez le nettoyer.
Commande des foyers 7 Commande des foyers 3 2 3 Tenez également compte du mode d'emploi de votre table de cuisson encastrée. Il contient des indications précieuses sur les récipients de cuisson, la commande, le nettoyage et l'entretien. Niveaux de cuisson • Dans les plages 1 - 9, vous pouvez régler les niveaux de cuisson. • Vous pouvez sélectionner des positions intermédiaires dans les plages 2 - 7. 1 = puissance minimale 9 = puissance maximale Coupez la zone de cuisson env.
Commande du four 2. Revenez en position arrêt pour terminer la cuisson. Commande du four Mettre le four en fonctionnement et à l'arrêt Voyant de fonctionnement Fonctions du four Voyant de température Sélection température 1. Positionnez l’interrupteur fonctions Four sur la fonction souhaitée. 2. Positionnez le sélecteur de température sur la température souhaitée. Le voyant de fonctionnement reste allumé aussi longtemps que le four est en fonctionnement.
Commande du four 9 Fonctions de four Les fonctions du four suivantes sont à votre disposition: Fonction Four Utilisation Eclairage Cette fonction permet d’éclairer à l’intérieur du four pendant la cuisson et le nettoyage. Chaleur tournante Pour cuire sur trois niveaux à la fois. Diminuez la température du four de 20 à 40 °C par rapport à la température Voûte/sole.
3 Commande du four Installation de la grille : Placez la grille de manière à ce que les deux tiges de guidage soient orientées vers le bas. Faites glisser la grille entre les barres d’insertion du niveau de l’utilisation que vous avez sélectionnée. Grâce au cadre de la grille qui augmente lors du fonctionnement, la vaisselle ene risque pas de glisser. Installez la grille et la plaque du four ensemble : Posez la grille sur la plaque du four.
Conseils d’utilisation et guide des cuissons 11 Conseils d’utilisation et guide des cuissons Tableau de cuisson Les valeurs indiquées dans le tableau suivant sont indicatives.
Conseils d’utilisation et guide des cuissons Niveau de cuisson 7-8 9 3 1 Type de cuisson adapté à Faire cuire des beignets de pommes de à tempéterre, des rognons, des steaks, rature des galettes élevée Porter à ébullition Faire revenir Faire frire Durée Remarques/conseils 5-15 min poêle pro Retournez de temps en temps Porter des quantités importantes d’eau à ébullition, faire revenir de la viande (goulasch, bœuf brais), faire frire des pommes frites Nous vous conseillons de faire bouillir le
Conseils d’utilisation et guide des cuissons 13 2 plaques à patisserie : par ex. niveaux de gradin 1 et 3 2 plaques à patisserie : niveaux de gradin 1, 3 et 5 3 Remarques générales • Insérez la plaque partie en biseau vers l’avant ! • Les fonctions Cuisson tradition ou Chaleur tournante permettent de placer simultanément deux plats de cuisson l’un à côté de l’autre sur la grille. Cela ne prolonge que très légèrement la durée de la cuisson.
2 Conseils d’utilisation et guide des cuissons En cas de durées de cuisson plus longues, vous pouvez mettre à l'arrêt le four 10 minutes environ avant la fin de la cuisson, afin d'utiliser la chaleur résiduelle. Sauf précision spécifique, les données indiquées dans les tableaux concernent l’insertion des préparations dans un four à froid.
Conseils d’utilisation et guide des cuissons Type de pâtisserie Fonction du four 15 Niveau de gradin Température °C Durée heures min Gâteau aux fruits (pâte levée / sablée)2) Cuisson tradition 3 170 0:35-0:50 Gâteau aux fruits sur pâte brisée Chaleur tournante 3 160-170 0:40-1:20 Gâteaux sur plaque à pâtisserie avec garniture délicate (par ex.
Conseils d’utilisation et guide des cuissons Cuisson sur plusieurs niveaux de gradin Chaleur tournante Type de gâteau Chaleur tournante niveau de gradin à partir du bas Température en °C Durée en h : min 2 niveaux 3 niveaux Choux garnis/éclairs 1/4 --- 160-1801) 0:35-0:60 Gâteaux de pâte sablée, secs 1/3 --- 140-160 0:30-0:60 Petits biscuits pâte sablée 1/3 1/3/5 150-160 0:15-0:35 Petits gâteaux secs 1/3 1/3/5 140 0:20-0:60 Petits gâteaux pâte molle 1/3 --- 160-170 0:25-0
Conseils d’utilisation et guide des cuissons Résultat de la cuisson Le gâteau est trop sec La coloration du gâteau n’est pas homogène Cause possible 17 Solution La température de cuisson est trop basse Augmentez la température de cuisson La durée de la cuisson est trop longue Diminuez la durée de la cuisson La température et la durée de la Diminuez la température et procuisson sont respectivement trop longez la durée de la cuisson élevée et trop courte La répartition de la pâte n’est pas Etalez la
Conseils d’utilisation et guide des cuissons Tableau gratins Niveau de cuisson Température °C Durée h. : min.
Conseils d’utilisation et guide des cuissons 3 19 Remarques concernant le tableau de rôtissage Les valeurs indiquées dans le tableau ci-après sont des valeurs indicatives. • Nous vous recommandons de faire seulement rôtir au four des morceaux de viande et de poisson pesant 1 kg minimum . • Pour éviter que le jus de la viande ou la graisse brûle, nous vous recommandons d’ajouter un peu d’eau dans le plat à rôtir. • Si nécessaire, retournez le rôti (au bout de 1/2 - 2/3 de la durée de la cuisson).
Conseils d’utilisation et guide des cuissons Niveau de gradin Température °C Durée en h : min Turbo gril 1 160-180 1:00 - 1:30 Jusqu’à 1 kg Cuisson tradition 3 2202501) 0:25 - 0:40 Râble de chevreuil/ cerf 1,5-2 kg Cuisson tradition 1 210-220 1:15 - 1:45 Gigot de chevreuil/ cerf 1,5-2 kg Cuisson tradition 1 200-210 1:30 - 2:15 Volaille en morceaux De chacun 200-250g Turbo gril 1 200-220 0:35-0:50 Demi-poulet De chacun 400-500g Turbo gril 1 190-210 0:35 - 0:50 Poulet,
Conseils d’utilisation et guide des cuissons 21 Tableau des grillades Nature de l’aliment à griller Durée de la grillade Niveau de gratin 1. Côté 2.
Conseils d’utilisation et guide des cuissons Sécher des aliments avec le Air chaud Fonction Four: Chaleur tournante • Utilisez des plaques graissées ou recouvertes de papier à four. • Pour obtenir de meilleurs résultats, éteignez le four à la moitié du temps de desséchage, ouvrez la porte du four et laissez refroidir pendant toute la nuit. • L’aliment sera alors parfaitement desséché.
Nettoyage et entretien 23 Tableau de cuisson pour les conserves Les durées de cuisson et les températures indiquées sont des valeurs indicatives.
Nettoyage et entretien Intérieur du four 3 1 Nettoyez l’appareil après chaque utilisation. Les salissures peuvent plus facilement être éliminées et ne risquent pas de brûler. 1. Allumez l’éclairage du four pour le nettoyer. 2. Après chaque utilisation, nettoyez le four avec de l’eau et du liquide vaisselle puis essuyez-le. Eliminez les salissures tenaces à l’aide de détergents spécifiques pour fours.
Nettoyage et entretien 3 25 Mettre en place le gradin fil Important! Les extrémités arrondies des tiges de guidage doivent être orientées vers l'avant! Pour la mise en place, accrochez d'abord la grille dans le haut (1) et insérez-la ensuite à l'avant, puis appuyez dessus (2). Eclairage du four 1 3 Avertissement: Risque d'électrocution ! Avant de remplacer la lampe du four : – Mettez le four hors service. – Enlevez les fusibles ou débranchez les disjoncteurs de l'armoire à fusibles.
Nettoyage et entretien Voûte du four Pour le nettoyage de la voûte du four, l'élément chauffant de la voûte peut être rabattu. 1 1 Rabattre l'élément chauffant Avertissement: Ne rabattez l'élément chauffant que lorsque le four est hors service et qu'il n'y a plus de danger de brûlure! 1. Enlevez le gradin fil latéral. 2. Saisissez l'élément chauffant à l'avant et tirezle vers l'avant au-dessus de l'estampage à la paroi intérieure du four. 3. L'élément chauffant se rabat vers le bas.
Nettoyage et entretien Porte du four Afin de faciliter le nettoyage, il est possible de démonter la portedu four. Décrochage de la porte du four 1. Ouvrez complètement la porte du four. 2. Relevez complètement le levier de serrage (A) situé sur les deux charnières de la porte. 3. Saisissez la porte à deux mains sur les côtés et fermez-la jusqu’à atteindre la première position d’accrochage (env. 45°). 3 4.
Nettoyage et entretien Accrochage de la porte du four 1. Saisissez chaque côté de la porte du four, côté poignée vers soi et en bas, et maintenez-la dans un angle d’env. 45°. Introduisez simultanémentles charnières situées dans la partie inférieure de la porte dans les deux charnières présentes dans le bas du four. Baissez la porte vers le bas, jusqu’au point de résistance. 2. Ouvrez complètement la porte du four. 3.
Nettoyage et entretien 29 Porte vitrée du four 1 La porte du four est équipée de trois vitres appliquées l’une derrière l’autre. Les vitres intérieures sont amovibles pour permettre le nettoyage. Attention ! Sous l’effet d’un choc, en particulier au niveau des arêtes de la vitre avant, le verre peut se briser. Démontage des vitres de la porte 1. Ouvrez complètement la porte du four. 2. Relevez complètement le levier de serrage (A) situé sur les deux charnières de la porte. 3.
Nettoyage et entretien 5. Saisissez une vitre à la fois par son bord supérieur et dégagez-la du guide en la soulevant vers le haut. Nettoyage des vitres de la porte Lavez les vitres de la porte à l'eau savonneuse en prenant soin de bien les rincer et de les essuyer soigneusement. 3 Montage des vitres de la porte 1. Insérez les vitres de la porte l’une après l’autre, en oblique par le haut, dans le profil de la porte situé au niveau de l'arête inférieure de la porte, puis abaissezles.
Nettoyage et entretien 3 Un rail de guidage (C) est présent sur le support de la porte. Celui-ci doit être introduit entre la vitre extérieure de la porte et le coude de guidage (D). La fermeture de l’attache (E) doit être encliquetée. 3. Ouvrez complètement la porte du four. 4. Rabattez le levier de serrage (A) situé sur les deux charnières de la porte dans leur position d’origine.. 5.
Que faire si … Que faire si … Symptôme Cause possible Les zones de cuisson ne fonctionnent pas Suivre les instructions de montage de la table de cuisson Le four ne chauffe pas Le four n’est pas sous tension Mettez le four sous tension Les réglages requis n’ont pas été effectués Vérifiez les réglages Le fusible de l’installation domestique (boîtier) a disjoncté Vérifiez le fusible. Si les fusibles sautent plusieurs fois, veuillez contacter un électricien agréé.
Protection de l’environnement 33 Protection de l’environnement 2 2 Elimination du matériel d’emballage Les matériaux d’emballage sont écologiques et recyclables. Les matières plastiques portent un signe distinctif, par ex. >PE<, >PS<, etc. Déposez les matériaux d’emballage en fonction de leur signe distinctif dans les containeurs prévus à cet effet (renseignez-vous auprès des services de votre commune).
Instructions d'installation Instructions d'installation 1 1 Avertissement : Le montage et le branchement du nouvel appareil sont du ressort exclusif de spécialistes agréés. Pour ne pas perdre le bénéfice de la garantie en cas de panne, veuillez observer ces recommandations. Consignes de sécurité pour l’installateur • Prévoir, pour l’installation électrique, un dispositif permettant de débrancher l’appareil du secteur au niveau de tous les pôles une ouverture des contacts d’au moins 3 mm.
Instructions d'installation 35
Instructions d'installation
Instructions d'installation 37
Garantie/Kundendienst, Garantie/service-clientèle, Garanzia/Servizio clienti, Guarantee/Customer Service Centres Servicestellen 5506 Mägenwil/Zürich Industriestrasse 10 9000 St.
Service après-vente 39 Service après-vente En cas d’anomalie de fonctionnemet vérifiez d’abord si vous ne pouvez pas remédier vous-même au dysfonctionnement à l’aide de la notice d’utilisation (chapitre “Que faire, si...“). Si vous ne parvenez pas à remédier au dysfonctionnement, veuillez contacter votre vendeur ou à défaut le Centre Contact Consommateurs qui vous communiquera l’adresse service après-vente.
315 918 601-B-201108-01 Sous réserve de modifications www.electrolux.com www.aeg.