User Guide

Problem Possible cause Solution
The appliance is
noisy.
The appliance is not sup-
ported properly.
Check if the appliance
stands stable (all feet and
wheels should be on the
floor). Refer to "Levelling".
The buzzer sounds.
The Alarm icon
flashing.
The temperature in the
freezer is too high.
Refer to "HighTemperature
Alarm".
The door is not closed
correctly.
Refer to "Door open alarm".
upper or lower
square is shown in
the temperature dis-
play.
An error has occurred in
measuring the tempera-
ture.
Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not be
possible).
“dEMo” appears on
the display.
The appliance is in dem-
onstration mode.
Keep pressed approximate-
ly 10 sec the OK button
since a long sound of buz-
zer is heard and the display
shut off for a short while:
appliance start works regu-
larly.
The compressor
runs continuously.
The Temperature regulator
may be set incorrectly.
Set a warmer temperature.
The door is not closed
correctly.
Refer to "Closing the door".
The door has been
opened too frequently.
Do not keep the door open
longer than necessary.
The food temperature is
too high.
Let the food temperature
decrease to room tempera-
ture before storage.
The room temperature is
too high.
Decrease the room temper-
ature.
There is too much
frost and ice.
The door is not closed
correctly.
Refer to "Closing the door".
The door gasket is de-
formed or dirty.
Refer to "Closing the door".
The temperature in
the appliance is too
cold.
The Temperature regulator
may be set incorrectly.
Set a warmer temperature.
The temperature in
the appliance is too
warm.
The Temperature regulator
may be set incorrectly.
Set a colder temperature.
The door is not closed
correctly.
Refer to "Closing the door".
ENGLISH 11