User manual

2. Activate the appliance.
3. Make sure that the appliance is in setting mode.
4. Set the washing programme.
• The related programme indicator comes on.
• The programme time flashes in the display.
• The phase indicators of the set washing programme come on.
5. If necessary, set the extra-hygiene or ÖKO PLUS function.
• The selection of these functions must always occur after the set of the washing pro-
gramme.
6. Press the Start touchpad, the washing programme starts automatically.
• The phase indicators go off but the indicator of the phase in operation stays on.
Starting the washing programme with delay start
1. Close the appliance door.
2. Activate the appliance.
3. Make sure that the appliance is in setting mode.
4. Set the washing programme and functions.
5. Press the Delay touchpad again and again until the display shows the time of the delay
start.
• The time of the delay start flashes in the display.
• The delay indicator is on.
6. Press the Start touchpad, the countdown starts automatically.
• The delay start time flashes no more in the display.
• The phase indicators of the set washing programme go off.
• When the countdown is completed, the washing programme starts automatically.
– The indicator of the phase in operation is on.
The opening of the appliance door stops the countdown. When you close the door, the
countdown continues from the point of interruption.
Cancelling the delay start
The countdown is not operating
1. Press the Delay touchpad again and again until:
• The display shows the time of the washing programme
• The phase indicators come on.
2. Press the Start touchpad to start the washing programme.
The countdown is operating
1. Press the Delay touchpad again and again until:
• The display shows the time of the washing programme.
• The phase indicators come on.
• The washing programme starts automatically.
Select and start a washing programme
41