User manual

Problem Possible cause Possible solution

The detergent can be the

cause.

Use a different brand of deter-

gent.

The dishes are wet. The washing programme was

without a drying phase or with

a decreased drying phase.

For better drying results, keep

the door ajar for some minutes.

The dishes are wet and matt. The rinse aid dispenser is emp-

ty.

Fill the rinse aid dispenser with

rinse aid.

The multitab function is on

(this function automatically

deactivates the rinse aid dis-

penser).

Activate the rinse aid dispenser.

Activating the rinse aid dispenser

1. Activate the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold touchpad Delay and touchpad Start at the same time until the pro-

gramme indicators AUTO, PRO and 30MIN flash.

4. Release touchpad Delay and touchpad Start.

5. Press touchpad Option.

• The programme indicators AUTO and 30MIN go off.

• The programme indicator PRO continues to flash.

• The display shows the setting of the rinse aid dispenser.

The rinse aid dispenser is off.

The rinse aid dispenser is on.

6. Press touchpad Option to change the setting.

7. Deactivate the appliance to confirm.

TECHNICAL DATA

Dimensions Width 596 mm

Height 818 - 898 mm

Depth 575 mm

Water supply pressure Minimum 0,5 bar (0,05 MPa)

Maximum 8 bar (0,8 MPa)

Water supply

Cold water or hot water maximum 60 °C

Capacity Place settings 12

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

46 Technical data