FAVORIT 44010 VI User manual Dishwasher
Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products.
Contents 3 117976390-00-02082007 Contents Operating instructions 5 Safety information Correct use General safety Child safety Installation 5 5 6 6 6 Product description 7 Control panel Setting mode Audible signals 8 9 9 First use 10 Set the water softener Setting manually Setting electronically 10 11 11 Use of dishwasher salt 12 Use of rinse aid Adjusting the dosage of rinse aid 13 14 Daily use 14 Load cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the
Contents Unloading the dishwasher 25 Care and cleaning Cleaning the filters Cleaning the spray arms External cleaning Internal cleaning Prolonged periods of non-operation Frost precautions Moving the machine 25 25 26 27 27 27 27 27 What to do if… 28 Technical data 30 Hints for test institutes 31 Installation instructions 33 Installation Fixing to the adjacent units Levelling 33 33 33 Water connection Water supply connections Water inlet hose with safety valve Water outlet hose connection
Safety information 5 Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
Safety information General safety • Dishwasher detergents can cause chemical burns to eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dishwasher detergent manufacturer. • The water in your dishwasher is not for drinking. Detergent residues may still be present in your machine. • Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.
Product description WARNING! For electrical and water connection carefully follow the instructions given in specific paragraphs.
Control panel Control panel 1 2 3 4 5 6 Programme selection buttons MULTITAB button Delay start button Indicator lights On/off button Function buttons Indicator lights Salt Illuminates when the special salt has run out. 1) Rinse aid Illuminates when the rinse aid has run out. 1) End of programme Illuminates when a washing programme has ended.
Control panel 9 • the activation/deactivation of the rinse aid dispenser • the activation/deactivation of the audible signals can also be set with the help of these buttons. Setting mode The appliance is in setting mode when all programme lights are illuminated.
First use 3. Press button C, the lights of buttons A and B turn off while the light of button C goes on flashing. At the same time the End of programme indicator light illuminates indicating that the audible signals are active. 4. To deactivate the audible signals press again the button C: the End of programme light turns off indicating that the audible signals have been deactivated. 5. To memorize the operation, switch off the dishwasher. 6.
Set the water softener 11 The water softener must be set in both ways: manually, using the water hardness dial and electronically.
Use of dishwasher salt 2. Press simultaneously and keep pressed buttons B and C, until the lights of buttons A, B and C start flashing. 3. Press button A, the lights of buttons B and C turn off while the light of button A goes on flashing. At the same time the End of programme indicator light starts flashing along with a sequence of intermittent audible signals.
Use of rinse aid 13 3. Using the funnel provided, pour in the salt until the container is full. 4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket. 5. Replace the cap tightly turning it clockwise until it stops with a click. Do not worry if water overflows from the unit when filling with salt, this is quite normal.
Daily use 2. Add the rinse aid in the container. The maximum level for filling is indicated by "max". The dispenser holds about 110 ml of rinse aid, which is sufficient for between 16 and 40 dishwashing cycles, depending upon the dosage setting. 3. Ensure that the lid is closed after every refill. Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.
Load cutlery and dishes 15 • Fill with dishwasher detergent. • Select a wash programme suitable for the cutlery and dishes. • Start the wash programme. Load cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. • Before loading the dishes, you should: – Remove all left over food and debris.
Load cutlery and dishes For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: • Cutlery with wooden, horn, china or mother- • Only wash stoneware in the dishwasher if it of-pearls handles. is specially marked as being dishwasher-safe by the manufacturer. • Plastic items that are not heat resistant. • Glazed patterns may fade if machine washed • Older cutlery with glued parts that are not frequently. temperature resistant.
Load cutlery and dishes 17 To make it easier to load larger dishes, the 2 plate racks on the right in the lower basket can be folded down. The cutlery basket WARNING! Long bladed knives stored in an upright position are a potential hazard. Long and/ or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives.
Load cutlery and dishes 2. Place forks and spoon in the cutlery basket with their handles pointing downwards. For larger utensils, such as whisks, leave off one half of the cutlery grid. The upper basket Load smaller, fragile crockery and long, sharp cutlery in the upper basket. • Arrange items of crockery on and under the folding cup racks so that they are offset from each other and water can reach all items. • The cup racks can be folded up out of the way for tall crockery items.
Use of detergent 19 Adjusting the height of the upper basket Maximum height of the dishes in: the upper basket the lower basket With upper basket raised 22 cm 30 cm With upper basket lowered 24 cm 29 cm The height of the upper basket can also be adjusted when it is loaded. Raising / lowering the upper basket: 1. Pull out the upper basket completely. 2. Holding the upper basket by the handle, raise it as far as it will go and then lower it vertically.
Use of detergent Fill with detergent 1. Open the lid. 2. Fill the detergent dispenser (1) with detergent. The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent. 3. All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (2). This detergent will take effect during the prewash phase. 4. When using detergent tablets, place the tablet in compartment (1) 5.
Multi-tab function 21 Multi-tab function This appliance is equipped with the "Multi-Tab function", that allows the use of the "Multi-Tab" combi detergent tablets. These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1" etc...). Check whether these detergents are suitable for your water hardness. See the manufacturers instructions.
Washing programmes 1. Press the On/Off button. The dishwasher must be in setting mode. 2. Press simultaneously buttons B and C, until the lights of buttons A , B, and C start flashing. 3. Press button B, the lights of buttons A and C turn off while the light of button = B goes on flashing. The digital display indicates the current setting: Rinse aid dispenser deactivated. 4. To change the setting, press button B again, the digital display indicates the = Rinse aid dispenser activated. new setting: 5.
Crockery and cutlery 30 0,9 9 ECO 50°4) Normal soil Crockery and cutlery 1,0 - 1,2 12 - 14 12 - 23 1,1 - 1,5 90 - 115 Water (litres) Light soil Energy (kWh) 30 MIN3) 1/2x Consumption values 1) Duration (minutes) Mixed nor- Crockery, mal and cutlery, heavy soil pots and pans Drying AUTO2) Final rinse Programme description Intermediate rinse Degree of soil Main wash Programme Prewash Type of load 23 150 - 160 Select and start a washing programme 1) The consumption values are in
Select and start a washing programme Close the dishwasher's door, the programme starts automatically. Setting and starting the programme with "delay start" 1. After having selected the washing programme, press the delay start button until the light corresponding to the chosen hours flashes (3h, 6h or 9h). 2. Close the dishwasher's door, the countdown starts automatically. 3. The countdown will decrease with steps of 3 hours. 4. The opening of the door will interrupt the countdown. 5.
Unloading the dishwasher 25 Unloading the dishwasher • Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. • Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. • Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.
Care and cleaning 3. Turn the handle about 1/4 a turn anticlockwise and remove the filter system. 4. Take hold of the coarse filter (A) by the handle with the hole and remove from the microfilter (B). 5. Clean all filters thoroughly under running water. 6. Remove the flat filter from the base of the washing compartment and clean both faces thoroughly. 7. Put the flat filter back in the base of the washing compartment and ensure that it fits perfectly. 8.
Care and cleaning 27 External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run the wash programme for heavy soiled dishes using detergent but without dishes.
What to do if… What to do if… The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Switch off the dishwasher and carry out the following suggested corrective actions.
What to do if… Fault code and malfunction The programme does not start. 29 Possible cause and solution • The dishwasher’s door has not been properly closed. Close the door. • The main plug is not plugged in. Insert the main plug. • The fuse has blown out in the household fuse box. Replace the fuse. • Delay start has been set. If dishes are to be washed immediately, cancel the delay start.
Technical data The wash results are not satisfactory The dishes are not clean • The wrong washing programme has been selected. • The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. • The spray arms do not rotate freely due to incorrect arrangement of the load. • The filters in the base of the washing compartment are dirty or incorrectly positioned. • Too little or no detergent has been used.
Hints for test institutes 31 Hints for test institutes Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes"). Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes").
Hints for test institutes Example loading arrangements: Upper basket 1) Lower basket with cutlery basket Cutlery basket 1) If there are cup racks in place on the lefthand side, remove them.
Installation 33 Installation instructions Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. This dishwasher is designed to be fitted under a kitchen counter or work surface.
Water connection Water connection Water supply connections Connection to a cold water supply is advised. If connection is made to a hot water supply the maximum permissible temperature is 60°C. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot.
Water connection 35 • The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water. • If water inlet hose or the safety valve is damaged, remove the mains plug immediately. • A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre. WARNING! Warning! Dangerous voltage. Water outlet hose connection The end of the drain hose can be connected in the following ways: 1.
Electrical connection The total length of the drain hose, including any extension you might add, must be no longer than 4 metres. The internal diameter of the extension hose must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed.
Environment concerns 37 Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
117976390-00-02082007 www.electrolux.
