User manual

19In daily use
Selecting the dishwashing cycle (Cycle Table)
Dishwashing
cycle
Suitable
for:
Type of
soiling
Programme
sequence
Consumption
values
1)
1) The consumption values were obtained under standardised conditions. They depend on how full the bas
kets for the dishes are. Variations are therefore possible in practice.
Prewash Main wash Intermediate rinse Final rinse Drying Length (minutes) Energy (kWh) Water (litres)
AUTOMATIC
(50°  65°)
2)
2) When using this cycle the degree of water clouding determines the amount of soiling on the dishes. The
length of the cycle and water and energy consumption can vary greatly – depending upon the load and
how dirty the dishes are. Depending upon the soiling, the temperature of the water will be automatically
adjusted to between 50°C and 65°C.
Dinner service and
cookware
normally soiled,
driedon food remains
• •
1 to 2x
• •
90  110
1,00  1,50
12  24
30 MIN
(60°)
3)
3) When using this cycle, only load the dishwasher half full.
Dishes, excluding
saucepans
just used, lightly to nor
mally soiled
 •  • 
30
0,8
9
INTENSIV
CARE 70°
4)
4) During the final rinse, the temperature is increased to 68° for 10 minutes to sanitize e.g. plastic chopping
boards or jam jars.
Dinner service and
cookware
heavily soiled,
driedon food remains,
in particular protein
and starch
• •
2x
• •
120  130
1,80  2,00
22  24
ECO
50°
5)
5) Test programme for Test Institutes
Dinner service and
cookware, tempera
turesensitive
crockery
normally soiled • • • • •
130  160
0,95  1,05
14  16