User manual

What to do if…26
The programme indicator for the
selected dishwashing cycle is
flashing,
the indicator for the end of the
dishwashing cycle is flashing in
sequence 2 short light signals
one after another.
The sink spigot connection is
blocked.
Clean the sink spigot out
let.
Water drain hose has not been
correctly positioned.
Check hose installation.
the indicator for the end of the
dishwashing cycle is flashing in
sequence 3 short light signals
one after another.
The antiflood system has been
triggered.
Turn off the tap and con
tact the Service Force Cen
tre.
The cycle is not starting.
The mains plug is not
plugged in.
Plug in mains plug.
A fuse in the house’s wiring sys
tem is defective.
Replace fuse.
For dishwasher models with a
delay start timer:
A start time has been selected.
If the dishes are to be
washed immediately, can
cel the delay start.
Rust spots are visible in the dish
washing compartment.
The dishwashing compartment
is made from rustfree stainless
steel. Rust spots in the dish
washing compartment are due
to rust particles from external
sources (rust particles from wa
ter pipes, pans, cutlery, etc.). Re
move such spots with a
commerciallyavailable stain
less steel cleaning product.
Only wash cutlery, dishes
and pans that are suitable
for dishwasher use.
A whistling noise can be heard
when washing dishes.
The whistling is not a cause for
concern.
Decalcify appliance with
commercially available
agents for cleaning dish
washers.
If the noises can still be
heard after decalcifying the
machine, use a different
brand of detergent for
washing cutlery and dishes.
Malfunction Possible cause Remedy