User manual

Multi-tab function

This appliance is equipped with the "Multitab function", that allows the use of the

"Multitab" combi detergent tablets.

These products are detergents with a combined cleaning, rinsing and salt functions.

They can also contain other different agents depending on which kind of tablets

you choose ("3 in 1", "4 in 1", "5 in 1" etc...).

Check whether these detergents are suitable for your water hardness. See the

manufacturers instructions.

This function can be selected with all washing programmes. With the selection of

this function the inflow of rinse aid and salt from each respective supply container

is automatically deactivated and also the indicator lights for salt and rinse aid are

deactivated.

Select the "Multitab function " before the start of a washing programme.

Once this function is selected (indicator light illuminated) it will remain active also

for the following washing programmes.

With the use of the "Multitab function", the cycle durations may change.

Once the programme is running, the "Multitab function " can NO longer be changed.

If you want to exclude the "Multitab function " you have to cancel the programme

setting and then deactivate the "Multitab function ".

In this case you have to set a washing programme (and desired options) again.

Activation/deactivation of the Multitab function

Simultaneously press and hold the two Multitab buttons (D and E), until the

"Multitab function" indicator light illuminates. This means that the function is ac-

tive.

To deactivate the function press the same buttons again until the "Multitab func-

tion" indicator light turns off.

If the drying results are not satisfactory we suggest that you:

1. Fill up the rinse aid dispenser with rinse aid.

2. Activate the rinse aid dispenser.

3. Set the rinse aid dosage to position 2.

• The activation/deactivation of the rinse aid dispenser can only be possible with

the "Multitab function" active.

Multi-tab function