FAVORIT 55020 EN DISHWASHER DE GESCHIRRSPÜLER USER MANUAL BENUTZERINFORMATION 2 24
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 7 8 10 10 12 12 13 14 14 15 17 18 21 21 21 Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of detergent and rinse aid Multitab function Loading cutlery and dishes Washing programmes Select and start a washing programme Care and cleaning What to do if… Technical data Environment concerns Installation The following symbols are used in this user manual: Important information concerning your personal safety
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your safety and the safety of your property. • To help the environment. • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or give it to a different person. The manufacturer is not responsible if an incorrect installation and use causes damage.
Safety information 5 • Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwasher cleaning agent, liquid detergent). This can cause damage to the appliance. • Make sure that the spray arms can move freely before you start a washing programme. • The appliance can release hot steam if you open the door while a washing programme operates. There is a risk of skin burns. • Do not remove the dishes from the appliance until the washing programme is completed.
Safety information – If the water inlet hose or the safety valve are damaged, immediately disconnect the mains plug from the mains socket. – Contact the service centre to replace the water inlet hose with safety valve. WARNING! Dangerous voltage. Electrical connection • The appliance must be earthed. • Make sure that the electrical information on the rating plate agrees with the power supply. • Always use a correctly installed shockproof socket. • Do not use multiple plugs and extension cables.
Product description 7 WARNING! The dishwasher detergents are dangerous and can cause corrosion ! • If an accident occurs with these detergents, contact immediately a physician. • If the detergent gets into the mouth, contact immediately a physician. • If the detergent gets into the eyes, contact immediately a physician and clean the eyes with water. • Keep dishwasher detergents in a safe area and out of children touch.
Control panel CONTROL PANEL 2 1 3 9 1 2 3 4 5 6 7 8 9 4 8 5 7 6 On/off button Programme guide Programme marker Indicators Display Start button Delay button Multitab button Programme knob Indicators Washing phase and rinsing phase indicator. It comes on when the washing phase or the rinsing phases operate. Drying phase indicator. It comes on when the drying phase operates. Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispenser. 1) Salt indicator.
Control panel 9 Programme guide This guide helps you in the selection of the washing programme. Display The display shows: • The electronic adjustment of the level of the water softener • The activation and deactivation of the rinse aid dispenser (only with the multitab function on) • The time of the washing programme • The remaining time to the end of the washing programme • The end of a washing programme (the display shows a zero) • The time of the delay start • The alarm codes.
Use of the appliance Activate the appliance. The appliance is not in setting mode when: • The time of the washing programme or of the delay start do not flash in the display. • Only one phase indicator is on. – It is necessary to cancel the programme or the delay start to go back to the setting mode. Refer to 'Select and start a washing programme'. USE OF THE APPLIANCE 1. Be sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener. 2.
Setting the water softener 11 Water hardness adjustment Water hardness German degrees (°dH) French degrees (TH°) mmol/l Clarke degrees manually electronically 4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2 <4 <7 < 0,7 <5 12) 12) 1) Factory position. 2) Do not use salt at this level. You must adjust the water softener manually and electronically. Manual adjustment Turn the water hardness dial to the position 1 or 2 (refer to the table). Electronic adjustment 1. 2. 3. 4. 5. 6. 7. 8.
Use of dishwasher salt USE OF DISHWASHER SALT How to fill the salt container 1. Turn the cap counterclockwise and open the salt container. 2. Fill the salt container with 1 litre of water (only for the first time you fill with salt). 3. Use the funnel to fill the salt container with salt. 4. Remove the salt around the opening of the salt container. 5. Turn the cap clockwise to close the salt container. It is correct that water comes out from the salt container when you fill it with salt.
Multitab function 13 5. Close the detergent dispenser. Press the lid until it locks into position. Use long washing programmes when you use the detergent tablets. These cannot fully dissolve with short washing programmes and can decrease the washing results. Use of rinse aid Rinse aid makes it possible to dry the dishes without streaks and stains. The rinse aid dispenser automatically adds rinse aid during the last rinsing phase. Do these steps to fill the rinse aid dispenser: 1.
Loading cutlery and dishes 5. When the washing programme is completed, adjust the water softener to the water hardness in your area. 6. Adjust the quantity of rinse aid. LOADING CUTLERY AND DISHES Refer to the leaflet 'Examples of ProClean loads'. Hints and tips • • • • • • • • • • • • Do not put in the appliance items that can absorb water (sponges, household cloths). Remove the remaining food from the items. Make soft the remaining burned food on the items.
Select and start a washing programme Programme Type of soil Type of load Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance. Do not use detergent with this programme. 15 Programme description Rinse 1) The appliance senses the type of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, the energy consumption and the programme time.
Select and start a washing programme 4. Set the washing programme. 5. Press the Delay button again and again until the display shows the time of the delay start. • The time of the delay start flashes in the display. 6. Press the Start button, the countdown starts automatically. • The delay start time flashes no more in the display. • The phase indicators of the set washing programme go off. When the countdown is completed, the washing programme starts automatically.
Care and cleaning 17 End of the washing programme When the washing programme is completed, the display shows a zero and the phase indicators go off. Deactivate the appliance and open the door. For better drying results, keep the appliance door ajar for some minutes. Remove the items from the baskets • Let the dishes become cold before you remove them from the appliance. Hot dishes can be easily damaged. • First remove the items from the lower basket, then from the upper basket.
What to do if… 7. Put the filter (B) to its initial position. Make sure that it assembles correctly in the two guides (C). 8. Put the filter (A) into position in filter (B). Turn the filter (A) clockwise until it locks. C To clean the spray arms Do not remove the spray arms. If the holes in the spray arms become clogged, remove remaining parts of soil with a thin pointed object. To clean the external surfaces Clean the external surfaces of the appliance and control panel with a moist soft cloth.
What to do if… Malfunction The appliance does not drain the water. Possible cause Possible solution The water inlet hose is damaged. Make sure that the water inlet hose has no damages. There is a blockage in the sink spigot. Clean the sink spigot. The connection of the water drain hose is not correct. Make sure that the connection is correct. The water drain hose is damaged. Make sure that the water drain hose has no damages. The anti-flood device is on.
What to do if… Problem Possible cause Possible solution The spray arms could not turn freely. Incorrect position of the items in the baskets. Make sure that an incorrect position of the items do not cause the blockage of the spray arms. The filters are dirty or not assembled and installed correctly. Make sure that the filters are clean and correctly assembled and installed. The quantity of detergent was not sufficient or missing. Make sure that the quantity of detergent is sufficient.
Technical data 21 – The display shows the setting of the rinse aid dispenser. The rinse aid dispenser is off. The rinse aid dispenser is on. 7. Press button Delay to change the setting. 8. Deactivate the appliance to confirm.
Installation Make sure that the dimensions of the recess agree with the dimensions in the picture. How to remove the appliance worktop 1. Remove the rear screws (1). 2. Pull the worktop from the behind of the appliance (2). 3. Lift the worktop and move it from the front slots (3). 4. Use the adjustable feet to adjust the level of the appliance. 5. Install the appliance under the kitchen worktop. Do not squash or bend the water hoses during the installation.
Installation If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane (A). If you do not remove the membrane, remaining food can cause a blockage in the drain hose spigot A safety device impedes the dirty water to go back into the appliance. If, the spigot of the sink has a 'non-return valve', this can cause the appliance to drain incorrectly. Remove the non-return valve. max 85 cm max 400 cm • A stand pipe with vent-hole.
FÜR PERFEKTE ERGEBNISSE Danke, dass Sie sich für dieses AEG Produkt entschieden haben. Wir haben es geschaffen, damit Sie viele Jahre von seiner ausgezeichneten Leistung und den innovativen Technologien, die Ihnen das Leben erleichtern, profitieren können. Es ist mit Funktionen ausgestattet, die in gewöhnlichen Geräten nicht vorhanden sind. Nehmen Sie sich ein paar Minuten Zeit zum Lesen, um seine Vorzüge kennen zu lernen.
Inhalt 25 INHALT 26 30 31 33 33 35 35 36 37 38 39 40 42 45 45 45 Sicherheitshinweise Gerätebeschreibung Bedienblende Gebrauch des Gerätes Einstellen des Wasserenthärters Gebrauch von Salz für Geschirrspüler Verwendung von Reinigungsmittel und Klarspüler Funktion "Multitab" Laden von Besteck und Geschirr Spülprogramme Auswählen und Starten eines Spülprogramms Reinigung und Pflege Was tun, wenn … Technische Daten Umwelttipps Montage In dieser Benutzerinformation werden folgende Symbole verwendet: Wichtige
Sicherheitshinweise SICHERHEITSHINWEISE Lesen Sie vor der Montage und Anwendung sorgfältig dieses Handbuch: • Für Ihre Sicherheit und die Sicherheit Ihres Eigentums. • Zum Schutz der Umwelt. • Zur korrekten Bedienung des Geräts. Bewahren Sie diese Bedienungsanleitung in der Nähe des Geräts auf, auch wenn Sie dieses an einem anderen Ort aufstellen oder es an eine andere Person weitergeben. Der Hersteller ist nicht dafür verantwortlich, wenn eine inkorrekte Montage und Verwendung Schäden verursacht.
Sicherheitshinweise 27 • Verwenden Sie für Geschirrspüler ausschließlich dafür vorgesehene Produkte (Reinigungsmittel, Salz, Klarspülmittel). • Die Verwendung von Salzarten, die nicht für Geschirrspüler vorgesehen sind, kann zur Beschädigung des Wasserenthärters führen. • Füllen Sie das Gerät mit Salz, bevor Sie ein Spülprogramm starten. Salzrückstände im Gerät können Korrosion oder ein Loch im Boden des Geräts verursachen.
Sicherheitshinweise Wasseranschluss • Verwenden Sie zum Anschluss des Geräts an die Wasserversorgung neue Schläuche. Benutzen Sie keine gebrauchten Schläuche. • Schließen Sie das Gerät nicht an neue oder lange nicht mehr benutzte Rohre an. Lassen Sie zunächst das Wasser ein paar Minuten durch das Rohr fließen und schließen Sie erst dann den Zulaufschlauch an. • Achten Sie darauf, die Wasserschläuche bei der Geräteinstallation nicht zu quetschen oder zu beschädigen.
Sicherheitshinweise 29 • Ersetzen oder wechseln Sie nicht selbst das Netzkabel. Wenden Sie sich hierzu an den Kundendienst. • Achten Sie darauf, den Netzstecker und das Netzkabel hinter dem Gerät nicht zu quetschen oder zu beschädigen. • Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist. • Ziehen Sie nicht am Netzkabel, wenn Sie das Gerät vom Stromnetz trennen möchten, sondern ziehen Sie dazu immer direkt am Netzstecker.
Gerätebeschreibung GERÄTEBESCHREIBUNG 11 10 1 9 2 3 4 5 1 2 3 4 5 6 7 8 9 10 11 Oberkorb Wasserhärtestufen-Wähler Salzbehälter Reinigungsmittelbehälter Klarspülmittel-Dosierer Typenschild Filter Unterer Sprüharm Oberer Sprüharm Oberster Sprüharm Arbeitsplatte 8 7 6
Bedienblende 31 BEDIENBLENDE 2 1 3 9 1 2 3 4 5 6 7 8 9 4 8 5 7 6 Ein-/Aus-Taste Programmkurzübersicht Referenzmarkierung Anzeigen Display Taste Start Taste Delay Taste Multitab Programmwahlschalter Anzeigen Spülgang- und Klarspülganganzeige leuchten während des Spülgangs oder Klarspülgangs auf. Trocknungsphasenkontrollanzeige. Leuchtet während der Trocknungsphase auf. Klarspülmittel-Kontrolllampe. Leuchtet auf, wenn der Klarspülmittel-Dosierer nachgefüllt werden muss. 1) Salz-Kontrolllampe.
Bedienblende Zehn Minuten nach Ende des Spülprogramms schaltet die Funktion AUTO OFF das Gerät automatisch aus. Diese Funktion hilft bei der Senkung des Energieverbrauchs. Programmkurzübersicht Diese Übersicht unterstützt Sie bei der Auswahl eines Spülprogramms.
Gebrauch des Gerätes 33 Schalten Sie das Gerät ein. Das Gerät ist im Einstellmodus, wenn: • Die Zeitdauer des letzten Spülprogramms im Display blinkt • Die Phasen-Kontrollanzeigen des Spülprogramms aufleuchten Schalten Sie das Gerät ein. Das Gerät ist nicht im Einstellmodus wenn: • Die Spülprogramm- oder die Zeitvorwahldauer im Display nicht blinken • Nur eine Programm-Kontrolllampe leuchtet – Um in den Einstellmodus zurückzukehren, müssen Sie das Programm oder die Zeitvorwahl abbrechen.
Einstellen des Wasserenthärters Wasserhärteeinstellung Wasserhärte Deutscher Wasserhärtegrad (dH °) Französischer Wasserhärtegrad (°TH) mmol/l Clarke-Werte manuell elektronisch 19 - 22 33 - 39 3,3 - 3,9 23 - 27 2 1) 5 1) 15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4 11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3 4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2 <4 <7 < 0,7 <5 1 2) 1 2) 1) Werkseinstellung 2) Verwenden Sie kein Salz bei diesen Werten.
Gebrauch von Salz für Geschirrspüler 35 GEBRAUCH VON SALZ FÜR GESCHIRRSPÜLER So füllen Sie den Salzbehälter: 1. Drehen Sie den Deckel gegen dem Uhrzeigersinn und öffnen Sie den Salzbehälter. 2. Füllen Sie den Salzbehälter mit 1 Liter Wasser (nur wenn Sie zum ersten Mal Salz einfüllen). 3. Verwenden Sie den Trichter, um den Salzbehälter zu füllen. 4. Entfernen Sie das Salz, das sich um die Öffnung des Salzbehälters herum angesammelt hat. 5.
Funktion "Multitab" 2. Füllen Sie das Reinigungsmittel in den Behälter. 1 . 3. Wenn das Spülprogramm einen Vorspülgang hat, schütten Sie eine kleine Menge Reinigungsmittel auf die Innenseite der Gerätetür. 4. Wenn Sie Geschirrspüler-Tabs verwenden, legen Sie diese in den Reinigungsmittelbehälter. 1 . 5. Schließen Sie den Reinigungsmittelbehälter, indem Sie auf den Deckel drücken, bis er einrastet. Wählen Sie lange Spülprogramme, wenn Sie Geschirrspüler-Tabs verwenden.
Laden von Besteck und Geschirr 37 Schalten Sie die Funktion Multitab vor dem Beginn eines Spülprogramms ein oder aus. Sie können die Funktion Multitab nicht ein- oder ausschalten, wenn ein Spülprogramm angelaufen ist. Aktivieren der Funktion Multitab • Drücken Sie die Taste Multitab und die Kontrolllampe Multitab leuchtet auf. Die Funktion ist aktiviert. – Wenn Sie die Funktion Multitab aktivieren, bleibt sie so lange aktiv, bis Sie sie wieder deaktivieren.
Spülprogramme SPÜLPROGRAMME Programm Verschmutzungsgrad Alle 1) Spülgut Programmbeschreibung Geschirr, Besteck, Töpfe und Pfannen Vorspülen Hauptspülgang 45 °C oder 70 °C Spülgänge Trocknen 2) Vor kurzem benutz- Geschirr und Betes Geschirr steck Hauptspülgang 60 °C Spülgang 3) Normal verschmutzt Geschirr und Besteck Vorspülen Hauptspülgang 50 °C Spülgänge Trocknen Stark verschmutzt Geschirr, Besteck, Töpfe und Pfannen Vorspülen Hauptspülgang 70 °C Spülgänge Trocknen Verwenden Sie diese
Auswählen und Starten eines Spülprogramms 39 AUSWÄHLEN UND STARTEN EINES SPÜLPROGRAMMS Start eines Spülprogramms ohne Zeitvorwahl 1. 2. 3. 4. Schließen Sie die Gerätetür. Schalten Sie das Gerät ein. Stellen Sie sicher, dass sich das Gerät im Einstellmodus befindet. Wählen Sie ein Spülprogramm. • Die Programmdauer blinkt im Display. • Die Phasenkontrollanzeigen des eingestellten Spülprogramms leuchten. 5. Drücken Sie die Taste Start und das eingestellte Spülprogramm beginnt automatisch.
Reinigung und Pflege Unterbrechung eines Spülprogramms • Öffnen Sie die Tür des Gerätes. – Das Spülprogramm stoppt. • Schließen Sie die Gerätetür. – Das Spülprogramm wird an der Stelle fortgesetzt, an der es unterbrochen wurde. Abbrechen des Spülprogramms Wenn das Spülprogramm noch nicht gestartet ist, können Sie die Auswahl ändern. Um die Auswahl bei laufendem Spülprogramm zu ändern, müssen Sie das Programm beenden.
Reinigung und Pflege 41 1. Drehen Sie den Filter (A) gegen den Uhrzeigersinn, um ihn zu entfernen und ziehen Sie ihn aus dem Filter (B). B A 2. Filter (A) besteht aus zwei Teilen. Ziehen Sie diese auseinander, um sie zu zerlegen. 3. Reinigen Sie die einzelnen Teile unter fließendem Wasser. 4. Setzen Sie die beiden Teile des Filters (A) ineinander und drücken Sie diese zusammen. Vergewissern Sie sich, dass sie korrekt ineinander sitzen. 5. Nehmen Sie den Filter (B) heraus. 6.
Was tun, wenn … WAS TUN, WENN … Das Gerät startet nicht oder stoppt während des Betriebs. Versuchen Sie zuerst eine Lösung für das Problem zu finden (beachten Sie die Tabelle). Ist dies nicht möglich, wenden Sie sich an den Kundendienst. Bei manchen Fehlfunktionen zeigt das Display einen Alarmcode an: - Es läuft kein Wasser in den Geschirrspüler. • - Das Gerät pumpt nicht ab. • - Die Aquasafe-Einrichtung ist ausgelöst. • WARNUNG! Schalten Sie das Gerät aus, bevor Sie die Überprüfungen vornehmen.
Was tun, wenn … Störung Mögliche Ursache 43 Mögliche Abhilfe Der Netzstecker steckt nicht richtig in der Steckdose. Stecken Sie den Netzstecker richtig in die Steckdose. Die Sicherung im Sicherungskasten hat ausgelöst. Wechseln Sie die Sicherung aus. Die Zeitvorwahl ist eingestellt. • Zeitvorwahl abbrechen. • Nach Ablauf der Zeitvorwahl startet das Spülprogramm automatisch.
Was tun, wenn … Problem Schlieren, Streifen, weißliche Flecken oder blauschimmernder Belag auf Gläsern und Geschirr. Mögliche Ursache Inkorrekte Härtegradeinstellung des Wasserenthärters. Stellen Sie den Wasserenthärter auf den korrekten Härtegrad ein. Die Verschlusskappe des Salzbehälters ist nicht richtig geschlossen. Stellen Sie sicher, dass der Salzbehälter richtig geschlossen ist. Die Klarspülmitteldosierung ist zu hoch. Klarspülmitteldosierung verringern.
Technische Daten 45 TECHNISCHE DATEN Abmessungen Breite 596 mm Höhe 850 mm Tiefe 625 mm Min. 0,5 bar (0,05 MPa) Max. 8 bar (0,8 MPa) Wasserversorgung 1) Kalt- oder Warmwasser maximal 60 °C Fassungsvermögen Gedecke Wasserdruck 12 1) Den Zulaufschlauch an einen Wasserhahn mit einem 3/4"-Außengewinde anschließen. Das Typenschild am inneren Rand der Gerätetür zeigt die elektrischen Anschlussdaten. Wenn Sie Heißwasser mithilfe umweltfreundlicher, alternativer Energiequellen (z. B.
Montage Achten Sie darauf, dass die Einbaunische die in der Abbildung gezeigten Abmessungen aufweist. Entfernen der Arbeitsplatte des Geräts 1. Lösen Sie die hinteren Schrauben (1). 2. Ziehen Sie die Arbeitsplatte hinter dem Gerät (2) vor. 3. Heben Sie die Arbeitsplatte an und ziehen Sie sie aus den vorderen Schlitzen (3) heraus. 4. Richten Sie das Gerät mit den Stellfüßen aus. 5. Installieren Sie das Gerät unter der Arbeitsplatte.
Anschluss des Ablaufschlauchs max 400 cm Schließen Sie den Wasserablaufschlauch an: • Den Siphon der Spüle an und befestigen Sie ihn an der Unterseite der Arbeitsplatte. Dadurch wird verhindert, dass Abwasser aus dem Siphon in das Gerät zurückfließen kann. • Ein Standrohr mit Entlüftungsöffnung. Der max 85 cm Innendurchmesser muss mindestens 4 cm betragen.
www.aeg-electrolux.