FAVORIT 55030 EN DISHWASHER DE GESCHIRRSPÜLER USER MANUAL BENUTZERINFORMATION 2 24
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 7 8 10 10 12 12 13 14 14 15 17 18 21 21 22 Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of detergent and rinse aid Multitab function Loading cutlery and dishes Washing programmes Select and start a washing programme Care and cleaning What to do if… Technical data Environment concerns Installation The following symbols are used in this user manual: Important information concerning your personal safety
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your safety and the safety of your property. • To help the environment. • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or give it to a different person. The manufacturer is not responsible if an incorrect installation and use causes damage.
Safety information 5 • Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwasher cleaning agent, liquid detergent). This can cause damage to the appliance. • Make sure that the spray arms can move freely before you start a washing programme. • The appliance can release hot steam if you open the door while a washing programme operates. There is a risk of skin burns. • Do not remove the dishes from the appliance until the washing programme is completed.
Safety information • The water inlet hose has a safety valve and a double sheath with an inner mains cable. There is pressure in the water inlet hose only when the water flows. If there is a leak in the water inlet hose, the safety valve interrupts the flow of water. – Be careful when you connect the water inlet hose: – Do not put the water inlet hose or the safety valve in water. – If the water inlet hose or the safety valve are damaged, immediately disconnect the mains plug from the mains socket.
Product description 7 – Remove the door catch. This prevents children or pets to be closed in the appliance. There is a risk of suffocation. – Discard the appliance at the local waste disposal centre. WARNING! The dishwasher detergents are dangerous and can cause corrosion ! • If an accident occurs with these detergents, contact immediately a physician. • If the detergent gets into the mouth, contact immediately a physician.
Control panel 10 Top spray arm 11 Worktop CONTROL PANEL 2 1 3 9 1 2 3 4 5 6 7 8 9 4 5 8 7 6 On/off button Programme guide Programme marker Indicators Display Start button Delay button Multitab button Programme knob Indicators Washing phase and rinsing phase indicator. It comes on when the washing phase or the rinsing phases operate. Drying phase indicator. It comes on when the drying phase operates. Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispenser.
Control panel 9 On/off button Press this button to activate or deactivate the appliance. After ten minutes from the end of the washing programme, the Auto Off function automatically deactivates the appliance. This helps to decrease energy consumption. Programme guide This guide helps you in the selection of the washing programme.
Use of the appliance Activate the appliance. The appliance is in setting mode when: • The time of the last set washing programme flashes in the display. • The indicators of the phases of the washing programme come on. Activate the appliance. The appliance is not in setting mode when: • The time of the washing programme or of the delay start do not flash in the display. • Only one phase indicator is on. – It is necessary to cancel the programme or the delay start to go back to the setting mode.
Setting the water softener 11 Water hardness adjustment Water hardness German degrees (°dH) French degrees (TH°) mmol/l Clarke degrees manually electronically 19 - 22 33 - 39 3,3 - 3,9 23 - 27 21) 51) 15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4 11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3 4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2 <4 <7 < 0,7 <5 12) 12) 1) Factory position. 2) Do not use salt at this level. You must adjust the water softener manually and electronically.
Use of dishwasher salt USE OF DISHWASHER SALT How to fill the salt container 1. Turn the cap counterclockwise and open the salt container. 2. Fill the salt container with 1 litre of water (only for the first time you fill with salt). 3. Use the funnel to fill the salt container with salt. 4. Remove the salt around the opening of the salt container. 5. Turn the cap clockwise to close the salt container. It is correct that water comes out from the salt container when you fill it with salt.
Multitab function 13 5. Close the detergent dispenser. Press the lid until it locks into position. Use long washing programmes when you use the detergent tablets. These cannot fully dissolve with short washing programmes and can decrease the washing results. Use of rinse aid Rinse aid makes it possible to dry the dishes without streaks and stains. The rinse aid dispenser automatically adds rinse aid during the last rinsing phase. Do these steps to fill the rinse aid dispenser: 1.
Loading cutlery and dishes 4. Start a washing programme without dishes. 5. When the washing programme is completed, adjust the water softener to the water hardness in your area. 6. Adjust the quantity of rinse aid. LOADING CUTLERY AND DISHES Refer to the leaflet 'Examples of ProClean loads'. Hints and tips • • • • • • • • • • Do not put in the appliance items that can absorb water (sponges, household cloths). Remove the remaining food from the items. Make soft the remaining burned food on the items.
Select and start a washing programme Programme Type of soil Type of load Normal or light soil Delicate crockery and glassware 15 Programme description wash 45 °C Rinses Dry 1) The appliance senses the type of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, the energy consumption and the programme time. 2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
Select and start a washing programme 5. Press the Delay button again and again until the display shows the time of the delay start. • The time of the delay start flashes in the display. 6. Press the Start button, the countdown starts automatically. • The delay start time flashes no more in the display. • The phase indicators of the set washing programme go off. When the countdown is completed, the washing programme starts automatically. • The indicator of the phase in operation comes on.
Care and cleaning 17 End of the washing programme When the washing programme is completed, the display shows a zero and the phase indicators go off. Deactivate the appliance and open the door. For better drying results, keep the appliance door ajar for some minutes. Remove the items from the baskets • Let the dishes become cold before you remove them from the appliance. Hot dishes can be easily damaged. • First remove the items from the lower basket, then from the upper basket.
What to do if… 2. Filter (A) has two parts. To disassemble the filter, pull them apart. 3. Fully clean the parts with water. 4. Put the two parts of the filter (A) together and push. Make sure that they assemble correctly in each other. 5. Remove the filter (B). 6. Fully clean the filter (B) with water. 7. Put the filter (B) to its initial position. Make sure that it assembles correctly in the two guides (C). 8. Put the filter (A) into position in filter (B).
What to do if… 19 WARNING! Deactivate the appliance before you do the checks. Malfunction The appliance does not fill with water. The appliance does not drain the water. Possible cause The water tap is blocked or there is limescale on it. Clean the water tap. The water pressure is too low. Contact your local water authority. The water tap is closed. Open the water tap. The filter in the water inlet hose is blocked. Clean the filter. The connection of the water inlet hose is not correct.
What to do if… – Model (MOD.) ........................................................ – Product number (PNC) .......................................... – Serial number (S.N.) .............................................. The washing results and drying results are not satisfactory Problem The dishes are not clean. Possible cause The washing programme was not applicable for the type of load and soil. Possible solution Make sure that the washing programme is applicable for the type of load and soil.
Technical data 21 Activating the rinse aid dispenser 1. 2. 3. 4. Activate the appliance. Make sure that the appliance is in setting mode. Turn the programme knob until the display shows two horizontal status bar. Press and hold button Multitab and button Delay at the same time until the indicaand flash. tors , 5. Release button Multitab and button Delay. 6. Press button Delay. – The indicators and go off. continues to flash. – The indicator – The display shows the setting of the rinse aid dispenser.
Installation waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product. Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. INSTALLATION Installation under a counter Put the appliance adjacent to a water tap and a water drain.
Installation 23 3. Lift the worktop and move it from the front slots (3). 4. Use the adjustable feet to adjust the level of the appliance. 5. Install the appliance under the kitchen worktop. Do not squash or bend the water hoses during the installation. To adjust the level of the appliance A correct level of the appliance lets the door to close and seal correctly. With an incorrect appliance level, the door does catches on the sides of the cabinet.
FÜR PERFEKTE ERGEBNISSE Danke, dass Sie sich für dieses AEG Produkt entschieden haben. Wir haben es geschaffen, damit Sie viele Jahre von seiner ausgezeichneten Leistung und den innovativen Technologien, die Ihnen das Leben erleichtern, profitieren können. Es ist mit Funktionen ausgestattet, die in gewöhnlichen Geräten nicht vorhanden sind. Nehmen Sie sich ein paar Minuten Zeit zum Lesen, um seine Vorzüge kennen zu lernen.
Inhalt INHALT 26 30 31 33 33 35 35 36 37 38 39 41 42 45 45 46 Sicherheitshinweise Gerätebeschreibung Bedienblende Gebrauch des Gerätes Einstellen des Wasserenthärters Gebrauch von Salz für Geschirrspüler Verwendung von Reinigungsmittel und Klarspüler Funktion "Multitab" Laden von Besteck und Geschirr Spülprogramme Auswählen und Starten eines Spülprogramms Reinigung und Pflege Was tun, wenn … Technische Daten Umwelttipps Montage In dieser Benutzerinformation werden folgende Symbole verwendet: Wichtige Hin
Sicherheitshinweise SICHERHEITSHINWEISE Lesen Sie vor der Montage und Anwendung sorgfältig dieses Handbuch: • Für Ihre Sicherheit und die Sicherheit Ihres Eigentums. • Zum Schutz der Umwelt. • Zur korrekten Bedienung des Geräts. Bewahren Sie diese Bedienungsanleitung in der Nähe des Geräts auf, auch wenn Sie dieses an einem anderen Ort aufstellen oder es an eine andere Person weitergeben. Der Hersteller ist nicht dafür verantwortlich, wenn eine inkorrekte Montage und Verwendung Schäden verursacht.
Sicherheitshinweise 27 • Verwenden Sie für Geschirrspüler ausschließlich dafür vorgesehene Produkte (Reinigungsmittel, Salz, Klarspülmittel). • Die Verwendung von Salzarten, die nicht für Geschirrspüler vorgesehen sind, kann zur Beschädigung des Wasserenthärters führen. • Füllen Sie das Gerät mit Salz, bevor Sie ein Spülprogramm starten. Salzrückstände im Gerät können Korrosion oder ein Loch im Boden des Geräts verursachen.
Sicherheitshinweise Wasseranschluss • Verwenden Sie zum Anschluss des Geräts an die Wasserversorgung neue Schläuche. Benutzen Sie keine gebrauchten Schläuche. • Schließen Sie das Gerät nicht an neue oder lange nicht mehr benutzte Rohre an. Lassen Sie zunächst das Wasser ein paar Minuten durch das Rohr fließen und schließen Sie erst dann den Zulaufschlauch an. • Achten Sie darauf, die Wasserschläuche bei der Geräteinstallation nicht zu quetschen oder zu beschädigen.
Sicherheitshinweise 29 • Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. Es besteht Brandgefahr. • Ersetzen oder wechseln Sie nicht selbst das Netzkabel. Wenden Sie sich hierzu an den Kundendienst. • Achten Sie darauf, den Netzstecker und das Netzkabel hinter dem Gerät nicht zu quetschen oder zu beschädigen. • Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist.
Gerätebeschreibung GERÄTEBESCHREIBUNG 11 10 1 9 2 3 4 5 1 2 3 4 5 6 7 8 9 10 11 Oberkorb Wasserhärtestufen-Wähler Salzbehälter Reinigungsmittelbehälter Klarspülmittel-Dosierer Typenschild Filter Unterer Sprüharm Oberer Sprüharm Oberster Sprüharm Arbeitsplatte 8 7 6
Bedienblende 31 BEDIENBLENDE 2 1 3 9 1 2 3 4 5 6 7 8 9 4 5 8 7 6 Ein-/Aus-Taste Programmkurzübersicht Referenzmarkierung Anzeigen Display Taste Start Taste Delay Taste Multitab Programmwahlschalter Anzeigen Spülgang- und Klarspülganganzeige leuchten während des Spülgangs oder Klarspülgangs auf. Trocknungsphasenkontrollanzeige. Leuchtet während der Trocknungsphase auf. Klarspülmittel-Kontrolllampe. Leuchtet auf, wenn der Klarspülmittel-Dosierer nachgefüllt werden muss. 1) Salz-Kontrolllampe.
Bedienblende Zehn Minuten nach Ende des Spülprogramms schaltet die Funktion Auto Off das Gerät automatisch aus. Diese Funktion hilft bei der Senkung des Energieverbrauchs. Programmkurzübersicht Diese Übersicht unterstützt Sie bei der Auswahl eines Spülprogramms.
Gebrauch des Gerätes 33 Schalten Sie das Gerät ein. Das Gerät ist im Einstellmodus, wenn: • Die Zeitdauer des letzten Spülprogramms im Display blinkt • Die Phasen-Kontrollanzeigen des Spülprogramms aufleuchten Schalten Sie das Gerät ein. Das Gerät ist nicht im Einstellmodus wenn: • Die Spülprogramm- oder die Zeitvorwahldauer im Display nicht blinken • Nur eine Programm-Kontrolllampe leuchtet – Um in den Einstellmodus zurückzukehren, müssen Sie das Programm oder die Zeitvorwahl abbrechen.
Einstellen des Wasserenthärters Wasserhärteeinstellung Wasserhärte Deutscher Wasserhärtegrad (dH °) Französischer Wasserhärtegrad (°TH) mmol/l Clarke-Werte manuell elektronisch 37 - 42 65 - 75 6,5 - 7,5 46 - 52 2 1) 8 29 - 36 51 - 64 5,1 - 6,4 36 - 45 2 1) 7 23 - 28 40 - 50 4,0 - 5,0 28 - 35 2 1) 6 19 - 22 33 - 39 3,3 - 3,9 23 - 27 2 1) 5 1) 15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4 11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3 4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2 <4
Gebrauch von Salz für Geschirrspüler 35 7. Drücken Sie wiederholt die Taste Multitab, um die Einstellung zu ändern. 8. Schalten Sie das Gerät zur Bestätigung aus. Wenn der Wasserenthärter elektronisch auf Stufe 1 eingestellt ist, leuchtet die Salzkontrolllampe bei leerem Salzbehälter nicht auf. GEBRAUCH VON SALZ FÜR GESCHIRRSPÜLER So füllen Sie den Salzbehälter: 1. Drehen Sie den Deckel gegen dem Uhrzeigersinn und öffnen Sie den Salzbehälter. 2.
Funktion "Multitab" Gebrauch von Reinigungsmitteln Um die Umwelt zu schützen, verwenden Sie nicht mehr als die korrekte Reinigermenge. Beachten Sie die Empfehlungen des Reinigungsmittelsherstellers auf der Reinigerverpackung. So füllen Sie den Reinigungsmittelbehälter: 1. Drücken Sie zum Öffnen des Deckels 2 die Freigabetaste 7 des Reinigungsmittelbehälters. 2. Füllen Sie das Reinigungsmittel in den Behälter. 1 . 3.
Laden von Besteck und Geschirr 37 Diese Tabletten enthalten das Reinigungsmittel, Klarspülmittel und Geschirrspülsalz. Einige Tabletten-Sorten können auch andere Zusätze enthalten. Vergewissern Sie sich, dass diese Tabletten für die Wasserhärte in Ihrer Region geeignet sind (siehe hierzu die Anweisungen auf der Produktverpackung). Die Funktion Multitab sperrt automatisch die Zufuhr von Klarspülmittel und Salz. Die Funktion Multitab deaktiviert die Kontrolllampen für Salz und Klarspülmittel.
Spülprogramme • Mischen Sie Löffel mit anderem Besteck, so können sie nicht zusammenkleben. • Achten Sie beim Einordnen des Spülguts darauf, dass das Wasser die Oberflächen aller Geschirrteile erreicht. • Ordnen Sie leichte Gegenstände in den Oberkorb ein. Achten Sie darauf, dass diese nicht verrutschen können. • Auf Kunststoffgegenständen und Geschirr mit Antihaftbeschichtung sammeln sich oftmals Wassertropfen.
Auswählen und Starten eines Spülprogramms Programm1) Energie (kWh) 39 Wasser (in Litern) 1,0 - 1,1 10 - 11 0,8 - 0,9 12 - 13 1) Das Display zeigt die Programmdauer an. Der Druck und die Temperatur des Wassers, die Schwankungen in der Stromversorgung und die Geschirrmenge können diese Werte verändern. AUSWÄHLEN UND STARTEN EINES SPÜLPROGRAMMS Start eines Spülprogramms ohne Zeitvorwahl 1. 2. 3. 4. Schließen Sie die Gerätetür. Schalten Sie das Gerät ein.
Auswählen und Starten eines Spülprogramms • Das Display die Dauer des Spülprogramms anzeigt. • Die Phasenkontrollanzeigen aufleuchten. 2. Drücken Sie die Taste Start, um das Spülprogramm zu starten. Der Ablauf der Zeitvorwahl ist aktiviert. 1. Drücken Sie mehrmals die Taste Delay, bis: • Das Display die Dauer des Spülprogramms anzeigt. • Die Phasenkontrollanzeigen aufleuchten. • Das Spülprogramm startet automatisch. Unterbrechung eines Spülprogramms • Öffnen Sie die Tür des Gerätes.
Reinigung und Pflege 41 REINIGUNG UND PFLEGE Entfernen und Reinigen der Filter Verschmutzte Filter beeinträchtigen das Spülergebnis. Obwohl die Filter wartungsarm sind, müssen sie in regelmäßigen Abständen überprüft und, falls nötig, gereinigt werden. 1. Drehen Sie den Filter (A) gegen den Uhrzeigersinn, um ihn zu entfernen und ziehen Sie ihn aus dem Filter (B). B A 2. Filter (A) besteht aus zwei Teilen. Ziehen Sie diese auseinander, um sie zu zerlegen. 3.
Was tun, wenn … Falls die Löcher in den Sprüharmen verstopft sind, reinigen Sie sie mit einem Cocktailspieß. Reinigen der Außenseiten Reinigen Sie die Außenseiten und das Bedienfeld des Gerätes mit einem weichen, feuchten Tuch. Verwenden Sie ausschließlich Neutralreiniger. Benutzen Sie keine Scheuermittel, Metallschwämmchen oder Lösungsmittel (Azeton usw.). WAS TUN, WENN … Das Gerät startet nicht oder stoppt während des Betriebs.
Was tun, wenn … Störung Mögliche Ursache Die AquasafeEinrichtung ist ausgelöst. Das Spülprogramm startet nicht. 43 Mögliche Abhilfe Drehen Sie den Wasserhahn zu und wenden Sie sich an den Kundendienst. Die Gerätetür ist offen. Schließen Sie die Gerätetür. Sie drückten nicht das Touchpad oder die Taste Start. Drücken Sie das Touchpad oder die Taste Start. Der Netzstecker steckt nicht richtig in der Steckdose. Stecken Sie den Netzstecker richtig in die Steckdose.
Was tun, wenn … Problem Mögliche Ursache Mögliche Abhilfe Die Reinigungsmittelmenge war nicht ausreichend oder es wurde kein Reinigungsmittel verwendet. Stellen Sie sicher, dass die Reinigungsmittelmenge ausreichend ist. Der Salzbehälter ist leer. Füllen Sie den Salzbehälter mit Geschirrspülsalz. Inkorrekte Härtegradeinstellung des Wasserenthärters. Stellen Sie den Wasserenthärter auf den korrekten Härtegrad ein. Die Verschlusskappe des Salzbehälters ist nicht richtig geschlossen.
Technische Daten 45 – Die Anzeige blinkt weiter. – Das Display zeigt die Einstellung des Klarspülmittel-Dosierers an. Der Klarspülmittel-Dosierer ist ausgeschaltet. Der Klarspülmittel-Dosierer ist eingeschaltet. 7. Drücken Sie Delay zur Änderung der Einstellung 8. Schalten Sie das Gerät zur Bestätigung aus. TECHNISCHE DATEN Abmessungen Wasserdruck Wasserversorgung Fassungsvermögen 1) Breite 596 mm Höhe 850 mm Tiefe 625 mm Min. 0,5 bar (0,05 MPa) Max.
Montage MONTAGE Installation als Einbaugeschirrspüler Installieren Sie das Gerät in der Nähe eines Wasserhahns und eines Wasserablaufs. Entfernen Sie die obere Abdeckung des Geräts, wenn Sie es unter einem Spülbecken oder einer Küchenarbeitsplatte installieren möchten. Achten Sie darauf, dass die Einbaunische die in der Abbildung gezeigten Abmessungen aufweist. Entfernen der Arbeitsplatte des Geräts 1. Lösen Sie die hinteren Schrauben (1). 2. Ziehen Sie die Arbeitsplatte hinter dem Gerät (2) vor. 3.
Ist das Gerät nicht waagrecht ausgerichtet, bleibt die Tür an den Seiten des Schranks hängen. Lockern oder ziehen Sie die Stellfüße an, um das Gerät zu nivellieren. Anschluss des Ablaufschlauchs max 400 cm Schließen Sie den Wasserablaufschlauch an: • Den Siphon der Spüle an und befestigen Sie ihn an der Unterseite der Arbeitsplatte. Dadurch wird verhindert, dass Abwasser aus dem Siphon in das Gerät zurückfließen kann. • Ein Standrohr mit Entlüftungsöffnung.
www.aeg-electrolux.