User manual

Operating instructions
29
As soon as the number of hours is displayed without flashing, the
countdown for the delay start is active.
The countdown will decrease with steps of 1 hour.
The opening of the door during the countdown will not modify the
delay start.
Once the delay start has elapsed the programme will start
automatically.
Note: With the delay start function set, the programme in
progress indicator light is off. Once the countdown of the delay
start has elapsed, the washing programme will start automatically
and the programme in progress indicator light will illuminate.
Note: it is possible to select a washing programme and the delay
start also with the door slightly opened.
In this case the start of the programme or of the countdown
will occur after the closure of the door.
Until that moment it is possible to modify the set made.
6. To interrupt or cancel a washing programme
in progress
Interrupt or cancel a washing programme in progress
ONLY if it’s absolutely necessary
Attention! Hot steam may escape when the door is opened.
Open the door carefully.
Interrupt a washing programme in progress
a)Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the point at which
it was interrupted.
b)Press the On/Off button, in this case all the indicator lights
turn off. Press the On/Off button again; the programme will start
from the point at which it was interrupted.
To cancel a washing programme
To cancel a washing programme you have to reset the dishwasher;
press simultaneously function buttons 2 and 3 for about
2 seconds, the indicator light of the button corresponding to the
running programme starts flashing. After about 2 seconds the
indicator lights of all the programme selection buttons will
illuminate, this means that the running programme has been
cancelled and that the machine has returned to setting mode.
If a new washing programme will be selected, check that there is
detergent in the detergent dispenser.
152955 84/0en 4-04-2005 14:39 Pagina 29