FAVORIT 77000 EN DISHWASHER USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 7 8 10 11 12 13 14 14 15 16 18 19 22 22 22 Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of detergent and rinse aid Multitab function Loading cutlery and dishes Washing programmes Select and start a washing programme Care and cleaning What to do if… Technical data Environment concerns Installation The following symbols are used in this user manual: Important information concerning your personal safety
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your safety and the safety of your property. • To help the environment. • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or give it to a different person. The manufacturer is not responsible if an incorrect installation and use causes damage.
Safety information 5 • Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwasher cleaning agent, liquid detergent). This can cause damage to the appliance. • Make sure that the spray arms can move freely before you start a washing programme. • The appliance can release hot steam if you open the door while a washing programme operates. There is a risk of skin burns. • Do not remove the dishes from the appliance until the washing programme is completed.
Safety information – Do not put the water inlet hose or the safety valve in water. – If the water inlet hose or the safety valve are damaged, immediately disconnect the mains plug from the mains socket. – Contact the service centre to replace the water inlet hose with safety valve. WARNING! Dangerous voltage. Electrical connection • The appliance must be earthed. • Make sure that the electrical information on the rating plate agrees with the power supply.
Product description 7 WARNING! The dishwasher detergents are dangerous and can cause corrosion ! • If an accident occurs with these detergents, contact immediately a physician. • If the detergent gets into the mouth, contact immediately a physician. • If the detergent gets into the eyes, contact immediately a physician and clean the eyes with water. • Keep dishwasher detergents in a safe area and out of children touch.
Control panel CONTROL PANEL 2 1 1 2 3 4 5 6 7 8 9 3 4 9 8 5 6 7 On/off button Programme guide Program button Programme indicators Display Delay button Start button Indicators Option button Indicators Multitab indicator. It comes on when you activate the function. Extra-Hygiene indicator. It comes on when you activate the function. Washing phase indicator. It comes on when the washing phase operates. Rinsing phase indicator. It comes on when the rinsing phases operate. Drying phase indicator.
Control panel 9 Indicators Door indicator. It comes on when the door is open or not closed correctly. 1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a washing programme operates. On/off button Press this button to activate or deactivate the appliance. After ten minutes from the end of the washing programme, the Auto Off function automatically deactivates the appliance. This helps to decrease energy consumption.
Use of the appliance Option button Multitab Extra-Hygiene Press three times ACTIVATED ACTIVATED Press four times DEACTIVATED DEACTIVATED Functions Multitab If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function. Refer to 'Multitab function'. Extra-Hygiene This function gives better results for the hygiene. During the rinsing phase, the temperature stays at 70°C for 10 to 14 minutes.
Setting the water softener 11 SETTING THE WATER SOFTENER The water softener removes minerals and salts from the water supply. These minerals and salts can cause damage to the appliance. Adjust the level of the water softener if this does not agree with the water hardness in your area. Contact your local water authority to know the water hardness in your area.
Use of dishwasher salt 3. Press and hold the Delay button and the Start button at the same time until the programme indicators AUTO, PRO and SILENT flash. 4. Release the Delay button and the Start button. 5. Press the Program button, • The programme indicators PRO and SILENT go off. • The programme indicator AUTO continues to flash. = level 5). • The display shows the setting of the water softener (example: 6. Press the Program button again and again to change the setting. 7.
Use of detergent and rinse aid 13 USE OF DETERGENT AND RINSE AID 1 3 2 4 30 7 4 MA X + 3 2 - 1 20 6 5 Use of detergent To help the environment, do not use more than the correct quantity of detergent. Obey the instructions on the detergent packaging. How to fill the detergent dispenser: 1. Press the release button 2 to open the lid 7 of the detergent dispenser. 2. Put the detergent in the dispenser 1 . 3.
Multitab function You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highest dosage). Turn the rinse aid selector 4 to increase or decrease the dosage. MULTITAB FUNCTION The multitab function is for combi detergent tablets. These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of tablets can contain other agents.
Washing programmes • • • • 15 Mix the spoons with other cutlery to prevent them to bond together. When you put the items in the baskets, make sure that the water can touch all surfaces. Put light items in the upper basket. Make sure that the items do not move. Water droplets can collect on plastic items and non-stick pans.
Select and start a washing programme Consumption values Energy (kWh) Programme1) Water (litre) 0,9 - 1,7 8 - 15 1,5 - 1,6 13 - 14 1,1 - 1,2 9 - 11 0,9 9 0,9 - 1,0 9 - 11 1,0 - 1,2 10 - 11 0,1 4 1) The display shows the programme time. The water pressure and temperature, the variations of the mains supply and the quantity of dishes can change the consumption values. SELECT AND START A WASHING PROGRAMME Starting the washing programme without delay start 1. 2. 3. 4.
Select and start a washing programme 17 • The delay indicator is on. 6. Press the Start button, the countdown starts automatically. • The delay start time flashes no more in the display. • The phase indicators of the set washing programme go off. • When the countdown is completed, the washing programme starts automatically. – The indicator of the phase in operation is on. The opening of the appliance door stops the countdown. When you close the door, the countdown continues from the point of interruption.
Care and cleaning 2. Open the appliance door. 3. For better drying results, keep the appliance door ajar for some minutes. Remove the items from the baskets • Let the dishes become cold before you remove them from the appliance. Hot dishes can be easily damaged. • First remove the items from the lower basket, then from the upper basket. • There can be water on the sides and on the door of the appliance. Stainless steel becomes cool more quickly than the dishes.
What to do if… 7. Put the filter (B) to its initial position. Make sure that it assembles correctly in the two guides (C). 8. Put the filter (A) into position in filter (B). Turn the filter (A) clockwise until it locks. 19 C To clean the spray arms Do not remove the spray arms. If the holes in the spray arms become clogged, remove remaining parts of soil with a thin pointed object. To clean the external surfaces Clean the external surfaces of the appliance and control panel with a moist soft cloth.
What to do if… Malfunction The appliance does not drain the water. Possible cause The water inlet hose is damaged. Make sure that the water inlet hose has no damages. There is a blockage in the sink spigot. Clean the sink spigot. The connection of the water drain hose is not correct. Make sure that the connection is correct. The water drain hose is damaged. Make sure that the water drain hose has no damages. The anti-flood device is on. The start of the washing programme does not occur.
What to do if… Problem 21 Possible cause Possible solution The spray arms could not turn freely. Incorrect position of the items in the baskets. Make sure that an incorrect position of the items do not cause the blockage of the spray arms. The filters are dirty or not asMake sure that the filters are sembled and installed correctly. clean and correctly assembled and installed. The quantity of detergent was not sufficient or missing. Make sure that the quantity of detergent is sufficient.
Technical data The rinse aid dispenser is off. The rinse aid dispenser is on. 6. Press button Option to change the setting. 7. Deactivate the appliance to confirm. TECHNICAL DATA Dimensions Width 596 mm Height 850 mm Depth Water supply pressure 625 mm Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Water supply 1) Cold water or hot water Capacity Place settings maximum 60 °C 12 1) Connect the water inlet hose to a water tap with a 3/4'' thread.
Installation 23 Make sure that the dimensions of the recess agree with the dimensions in the picture. How to remove the appliance worktop 1. Remove the rear screws (1). 2. Pull the worktop from the behind of the appliance (2). 3. Lift the worktop and move it from the front slots (3). 4. Use the adjustable feet to adjust the level of the appliance. 5. Install the appliance under the kitchen worktop. Do not squash or bend the water hoses during the installation.
If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane (A). If you do not remove the membrane, remaining food can cause a blockage in the drain hose spigot A safety device impedes the dirty water to go back into the appliance. If, the spigot of the sink has a 'non-return valve', this can cause the appliance to drain incorrectly. Remove the non-return valve. max 85 cm max 400 cm • A stand pipe with vent-hole. The internal diameter must be minimum 4 cm.
www.aeg-electrolux.
