User Guide

12
The setting of a new level must occur with the dishwasher switched off.
To set a different level, proceed as follows:
1. Press simultaneously and keep pressed the "Intensive 70°C" and "Normal
65°C" programme pushbuttons.
2. Press the On/Off pushbutton.
3. Always keeping pressed the "Intensive 70°C" and "Normal 65°C"
programme pushbuttons wait about 5 seconds until the indicator light
of the programme which corresponds to the current level comes on.
4. Press the "Intensive 70°C" pushbutton as many times as necessary until
the indicator light of the programme corresponding to the new level
comes on. 5 seconds after this pushbutton has last been pressed the
dishwasher memorises the level selected and returns to the programme
setting mode.
SO283
If your water hardness is level 1 it is already soft and therefore there is
no need to use salt. With the setting of the water softener at level 0 the
salt indicator light on the control panel will always remain off.
Water hardness
°dH
(german degrees)
°TH
(french degrees)
PPM
(parts per million)
Use of saltLevel
1
2
3
4
5
0 - 4
5 - 11
12 - 22
23 - 39
40 - 50
0 - 8
9 - 20
21 - 40
41 - 70
71 - 90
0 - 80
81 - 200
201 - 400
401 - 700
701 - 900
NO
YES
YES
YES
YES
152985 61/2 en-es 30-11-1999 16:14 Pagina 12