User Guide

25
8. Setting and starting of the programme
● Select the wash programme by simply pressing one of the programme
pushbuttons, the indicator lights of the phases corresponding to the
programme will illuminate.
● If the setting of the programme has been made with the door
opened:
close the door and the programme will start automatically after 5
seconds. Until the door remains open you still have the possibility to
modify the setting made.
● If the setting of the programme has been made with the door
closed:
the programme will start automatically after 5 seconds from the last
pressure of a pushbutton.
● The starting of the programme will be confirmed by an audible signal,
the indicator lights of the phases turn off except for the light of the
phase under way.
9. At the end of the washing programme
● The dishwasher will automatically stop and an audible signal informs
you that the programme has ended. The indicator lights of the
programme and phases turn off.
Press the On/Off pushbutton to switch the dishwasher off and open
the door.
● Wait a few minutes before removing the dishes, in this way they will
be cooler and the drying will be improved.
Empty the lower basket first and then the upper one, this will avoid
water dripping from the upper basket onto the dishes in the lower
one.
● When the wash programme has finished, it is recommended that the
dishwasher is unplugged and the water tap turned off.
152985 61/2 en-es 30-11-1999 16:15 Pagina 25