User Guide

30
...problems occur during use of the dishwasher
Malfunction
The programme does not
start
The machine is noisy
The door is difficult to
close
The plug is not properly
inserted in the power
socket.
The door has not been
properly closed.
Close the door.
Insert the plug.
There is no current at the
socket.
Dishes are rattling against
each other.
The spray arms are
knocking against the
dishes.
The dishwasher is not level,
or not properly built-in.
Load correctly crockery,
cutlery, pots and pans.
Refer to "Loading cutlery
and dishes"
Refer to "Installation"
instructions.
Possible cause
Remedy
...the wash results are not satisfactory
Visible lime deposits or white film on the dishes
● Check that the right level of the water softener is setted.
● Check that there is salt.
The dishes are not quite dry
● The rinse aid has run out or too little is being used.
The dishes are not clean
● The baskets are too full.
● The dishes have not been arranged properly.
● The spray arms do not rotate because incorrect loading of the baskets.
● The filters are clogged.
● The filters are not in position.
● Not enough detergent has been used or it is unsuitable.
● The detergent is old or has gone hard.
● The salt container cap is not properly closed.
152985 61/2 en-es 30-11-1999 16:15 Pagina 30