User manual

A device must be provided in the electrical installation which allows the

appliance to be disconnected from the mains at all poles with a contact

opening width of at least 3 mm

Suitable isolation devices include line protecting cut-outs, fuses (screw

type fuses are to be removed from the holder), earth leakage trips and

contactors.

Safety cut-out

Cooking surface

• If after switching on the cooking surface, a heat setting is not set for

a cooking zone within approx. 10 seconds, the cooking surface auto-

matically switches itself off.

• If one or more sensor fields are covered for longer than approx. 10

seconds, e.g. by a pan placed upon it, a signal sounds and the cooking

surface switches off automatically.

• If all cooking zones are switched off, the cooking surface automati-

cally switches itself off after approx. 10 seconds.

Control panel

3 Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel

immediately switches all cooking zones off.

Cooking zones

• If one of the cooking zones is not switched off after a certain time, or

if the heat setting is not modified, the relevant cooking zone switches

off automatically. _ is displayed. Before being used again, the cook-

ing zone must be set to 0.

Heat setting Switches off after

V, 1 - 2

6 hours

3 - 4

5 hours

4 hours

6 - 9

1.5 hours