User manual

8
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions
are controlled by touching sensor fields and confirmed by displays and
acoustic signals.
Touch the sensor fields from above, without covering other sensor
fields.
Displays
Sensor field Function
On / Off Switches appliance on and off
Increase settings To increase heat settings
Reduce settings To reduce heat settings
Automatic warm-up
function
To switch automatic warm-up
function on/off
Dual zone touch control Switches outside zone
on and off
Stop+Go To switch the Keep Warm setting
on/off
Display Description
¾ Cooking zone is switched off
u Keep warm setting Keep warm setting/STOP+GO
function is set
¿ - Ç Heat settings Heat setting is set
2 - 6 Heating setting plus
decimal point
Intermediate heat setting is set
e Fault Malfunction has occurred
h Residual heat Cooking zone is still hot
l Child safety device Child safety device is engaged
_ Safety cut-out Safety cut-out has been activated
25
5. Place first appliance in the cut-out. Lay connecting cross bar in the
cut-out and push up halfway against the appliance.
6. Put silicon on the appliance corners that will touch one another. Put
silicon on the end of the cross bar.
7. Loosely screw in fixing plates / retaining grips from below on the work-
top and on the connecting cross bar.