HE634250FB DE INDUKTIONS-KOCHFELD BENUTZERINFORMATION
FÜR PERFEKTE ERGEBNISSE Danke, dass Sie sich für dieses AEG Produkt entschieden haben. Wir haben es geschaffen, damit Sie viele Jahre von seiner ausgezeichneten Leistung und den innovativen Technologien, die Ihnen das Leben erleichtern, profitieren können. Es ist mit Funktionen ausgestattet, die in gewöhnlichen Geräten nicht vorhanden sind. Nehmen Sie sich ein paar Minuten Zeit zum Lesen, um seine Vorzüge kennen zu lernen.
Inhalt INHALT 4 5 7 9 13 14 15 16 Sicherheitshinweise Montageanleitung Gerätebeschreibung Gebrauchsanweisung Praktische Tipps und Hinweise Reinigung und Pflege Was tun, wenn … Umwelttipps In dieser Benutzerinformation werden folgende Symbole verwendet: Wichtige Hinweise zur Sicherheit von Personen und Informationen zur Vermeidung von Geräteschäden Allgemeine Hinweise und Ratschläge Hinweise zum Umweltschutz Änderungen vorbehalten 3
Sicherheitshinweise SICHERHEITSHINWEISE Lesen Sie zu Ihrer Sicherheit und für die optimale Geräteanwendung vor Installation und dem Gebrauch des Geräts die vorliegende Bedienungsanleitung aufmerksam durch. Bewahren Sie diese Bedienungsanleitung zusammen mit dem Gerät auf, auch wenn Sie umziehen oder das Gerät verkaufen. Jeder, der dieses Gerät benutzt, muss mit der Bedienung und den Sicherheitsmerkmalen gut vertraut sein.
Montageanleitung 5 • Gehen Sie beim elektrischen Anschluss des Geräts an eine Anschlussdose sorgsam vor. Achten Sie darauf, dass das Gerät oder heißes Kochgeschirr nicht von Stromkabeln berührt wird. Achten Sie darauf, dass sich keine Stromkabel verheddern. So vermeiden Sie Schäden am Gerät. • Wenn Kochgeschirr oder andere Gegenstände auf die Glaskeramik fallen, kann die Oberfläche beschädigt werden. • Kochgeschirr aus Gusseisen, Aluguss oder mit beschädigtem Boden kann die Glaskeramik verkratzen.
Montageanleitung • Der Berührungsschutz muss durch den Einbau gewährleistet sein. Schubladen müssen zum Beispiel mit einem Schutzboden direkt unter dem Gerät installiert werden! • Die Schnittflächen an der Arbeitsplatte müssen mit einem geeigneten Dichtungsmaterial vor Feuchtigkeit geschützt werden! • Das Gerät muss so eingebaut werden, dass es spaltfrei mit der Arbeitsplatte abschließt. Dazu ist eine geeignete Dichtung erforderlich! • Schützen Sie die Geräteunterseite vor Dampf und Feuchtigkeit, die z.
Gerätebeschreibung R 5mm = 7 600mm 490+1mm 560+1mm = min. 38 mm min. 5 mm GERÄTEBESCHREIBUNG Allgemeine Übersicht 1 145 2 mm 170 mm 265 mm 180 mm mm 210 3 5 4 1 Induktionskochzone 1400 W, mit Power-Funktion 2500 W (Mindestdurchmesser des Kochgeschirrs = 125 mm). 2 Induktionskochzone 2300 W, mit Power-Funktion 3200 W (Mindestdurchmesser des Kochgeschirrs = 145 mm). 3 Induktionskochzone 1800 W, mit Power-Funktion 2800 W (Mindestdurchmesser des Kochgeschirrs = 145 mm).
Gerätebeschreibung Bedienfeldanordnung 1 2 3 4 7 6 5 Bedienen Sie das Gerät über die Sensorfelder. Die Anzeigen, Kontrolllampen und akustischen Signale informieren Sie über die aktiven Funktionen. Sensorfeld Timer-Anzeige 1 Funktion Anzeige der Zeit in Minuten. Auswahl der Kochzone. 2 Verlängerung oder Verkürzung der Zeit. / 3 4 Verriegelung/Entriegelung des Bedienfelds. 5 Aktiviert die Power-Funktion. 6 Ein- und Ausschalten der Funktion STOP+GO. Kochstufenanzeige.
Gebrauchsanweisung 9 OptiHeat Control (Restwärmeanzeige, 3-stufig) WARNUNG! \ \ Es besteht Verbrennungsgefahr durch Restwärme! OptiHeat Control zeigt die Restwärmestufe an. Die Induktionskochzonen erzeugen die erforderliche Hitze zum Kochen direkt im Boden des Kochgeschirrs. Die Glaskeramik wird nur durch die Wärme des Kochgeschirrs erhitzt. GEBRAUCHSANWEISUNG Das Kochfeld wird mit den Schaltern des Herds und dem Bedienfeld des Kochfelds bedient.
Gebrauchsanweisung Ankochautomatik Mit der Ankochautomatik wird die erforderliche Kochstufe in kürzerer Zeit erreicht. Bei Verwendung dieser Funktion wird eine gewisse Zeit lang die höchste Kochstufe eingestellt (siehe Tabelle im Kapitel: Praktische Tipps und Hinweise) und anschließend auf die erforderliche Stufe zurückgeschaltet. Drehen Sie zum Einschalten der Ankochautomatik für die Kochzone den Knopf im Uhrzeigersinn, bis das Display anzeigt. Stellen Sie dann direkt die gewünschte Kochstufe ein.
Gebrauchsanweisung 11 Uhr Kurzzeitmesser Mit dem Kurzzeitmesser stellen Sie ein, wie lange eine Kochzone für einen einzelnen Kochvorgang eingeschaltet bleiben soll. Wählen Sie erst die Kochzone aus und stellen Sie dann den Kurzzeitmesser ein. Sie können die Kochstufe einstellen, bevor Sie den Kurzzeitmesser einstellen oder umgekehrt. • Auswählen der Kochzone: Berühren Sie so oft, bis die Anzeige der gewünschten Kochzone aufleuchtet.
Gebrauchsanweisung • Ausschalten des Signaltons: Berühren Sie . • Ausschalten des Kurzzeitweckers: Schalten Sie die vordere linke Kochzone kurz ein und wieder aus. Der Kurzzeitwecker hat keine Auswirkung auf den Kochzonenbetrieb. STOP+GO Mit der Funktion werden alle eingeschalteten Kochzonen auf Warmhalten ( ) geschaltet. Die Funktion unterbricht nicht die Timer-Funktion. • Berühren Sie zur Aktivierung dieser Funktion . Das Symbol leuchtet auf. .
Praktische Tipps und Hinweise 13 • Die Kindersicherung wird wieder eingeschaltet, sobald Sie das Gerät ausschalten. OffSound Control (Aktivierung und Deaktivierung des Signaltons) Deaktivieren des Signaltons Schalten Sie das Gerät aus. Berühren Sie 3 Sekunden lang, der Signalton ertönt. Berühren Sie , der Signalton ertönt. Berühren Sie 3 Sekunden lang. leuchtet und der Signalton ist aktiviert. Berühren Sie , leuchtet auf, der Signalton ist deaktiviert.
Reinigung und Pflege • Pfeifen: Sie haben eine oder mehrere Kochzonen auf eine hohe Stufe geschaltet und das Kochgeschirr besteht aus unterschiedlichen Materialien (Sandwichkonstruktion). • Summen: Sie haben Kochzonen auf eine hohe Stufe geschaltet. • Klicken: Bei elektronischen Schaltvorgängen. • Zischen, Surren: Das Gebläse läuft. Die beschriebenen Geräusche sind normal und weisen nicht auf einen Defekt hin. Energie sparendes Kochen • Decken Sie Kochgeschirr, wenn möglich, mit einem Deckel ab.
Was tun, wenn … 15 WAS TUN, WENN … Problem Das Gerät kann nicht eingeschaltet oder bedient werden. Mögliche Ursache und Abhilfe • Schalten Sie das Gerät erneut ein und stellen Sie innerhalb von 10 Sekunden die Kochstufe ein. • Zwei oder mehr Sensorfelder wurden gleichzeitig berührt. Berühren Sie nur ein einzelnes Sensorfeld. • Stop+Go ist eingeschaltet. Siehe Abschnitt „Gebrauchsanleitung“. • Wasser oder Fettspritzer befinden sich auf dem Bedienfeld. Bedienleiste abwischen.
Umwelttipps Problem und eine Zahl leuchten auf. leuchtet auf. Mögliche Ursache und Abhilfe Im Gerät ist ein Fehler aufgetreten. Trennen Sie das Gerät eine Zeit lang vom Stromnetz. Schalten Sie die Sicherung im Sicherungskasten der Hausinstallation aus. erneut aufleuchSchalten Sie die Sicherung wieder ein. Wenn tet, benachrichtigen Sie den Kundendienst. Im Gerät ist ein Fehler aufgetreten, da ein Kochgeschirr leer gekocht ist. Der Überhitzungsschutz der eingeschalteten Kochzone hat ausgelöst.
www.aeg.